Fusion 5.03 with Windows 8 comments random blocks "HAL_INITIALIZATION_FAILED".

Similar Questions

• Window Windows 98 Auslogic Defrag (blocks) for Windows 7

  Is it possible to look at Windows 7 (or later) defragmentation that I used to do with Windows 98 (photo of blocks) [see photo]

  I use to love watching it!

  

  Hello

  N ° you have 3rd defragmentation party programs do.

  Microsoft has changed when they released Vista.

  Not to mention that Auslogics there are:

  https://www.Piriform.com/Defraggler/download

  See you soon.

• VMware fusion 3 - adjustment to comments does not work with Windows Server 2008

  I use 3 Fusion with existing image from Fusion 2.x on Windows Server 2008. After the upgrade to Fusiion 3 (I upgraded VMware tools (I've also tried their uninstall and reinstall) too) the guest operating system does not change the resolution when resizing the window. It does not change the resolution if/when I goes into full screen mode. I have an 'exclamation' mark in Device Manager and it says that "Windows has stopped this device because it has reported problems. (Code 43) ». I tried with and without 3D acceleration enabled.

  WS2008 is where I spend most of my time in fusion, I hope that this can be solved somehow (a config directive file or something perhaps?)?

  Thank you

  Miha.

  He had a similar position and the problem is specific to the version of the virtual machine virtual material.

  Can upgrade you your VM hardware version? (Fusion UI have probably an option present as 'version Upgrade VM HW'... cannot check now but 90% sure about that.)

  Thank you.

• Sucks TC-710 with Windows 10 random freeze

  I bought an Acer Aspire TC-710 last week and it is locking up randomly and requires a stop hard to bring it back.

  I have updated all the drivers that were available on the support with the exception of the BIOS ACER site. I ran also all the updates of windows and the problem persists.

  I saw a post here saying that the solution was a BIOS update, but I don't see how it's possible, given that the computer boots perfectly. I'll reach out to the person who had the udpated BIOS to see what it was also updated. My current version of BIOS is 2015-11-10, and the latest version is 2015-12-07 so not a lot of change...

  * As a kicker, he is the second ACER Aspire TC-710, I bought this problem. One, I went on the assumption that it was a bad piece of memory/ram, but the chances of that happening twice are difficult to quantify.

  Any help solving this is greatly appreciated!

  Apparently the BIOS update will solve the problem of gel.  Keep in mind, the date of the BIOS are looking into the information system.  These dates on the site are just posting dates.

  https://community.Acer.com/T5/aspire-desktops/brand-new-TC-710-keeps-freezing-have-to-do-a-hard-shut...

  1. right click on the button to start Windows

  2. left click on run

  3. type msinfo32

  4. click on ok

  There is a freezing problem for people who use SSDS and disks HARD with Windows 10 anniversary. It is a problem that is independent of Microsoft.  But I don't think it's your problem.  I think you should update the BIOS for your problem of gel.

• Random freezes with windows 7-32 bit

  Previously, it was Random freezes with windows 7-64 bit and now random freezes with windows 7-32 bit it is very amazing that I have installed windows 7 32 bit, it's back to w7 w8 to be comfortable using O.E.M

  Concerning

  Hello

  Thanks for posting in the Microsoft Community.

  You can read these articles and check if that helps.

  Windows hangs or freezes: http://support.microsoft.com/kb/2681286?wa=wsignin1.0#method5

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Optimize Windows 7 for better performance: http://windows.microsoft.com/en-IN/windows7/Optimize-Windows-7-for-better-performance

  Note: you should not disable Windows Firewall, unless you have another firewall is activated. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• How can I get Random House v 1.7 that worked on Windows 2000 to work with Windows 7? Thank you

  I have the Random House Unabridged electronic dictionary CD-ROM version 1.7 for Windows.  It worked with Windows 2000, lost some features with Windows XP. Now I have Windows 7 which will not accept it.  Random House tells me that I must get Microsoft to fix my problem.  Help!

  Hi Robert,.

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, you have problems with the execution of a program.

  This problem may occur because of the incompatibility.

  The Random House Version 4 is compatible with Windows 7.

  Windows 7 for College Dictionary Webster House Random version 4 compatibility

  You can upgrade to Version 4 or try to run the software in Windows XP compatibility mode.

  Make older programs in this version of Windows (Windows 7)

  Meet us if you experience any problems during execution of programs or any other issue of Windows, and we would be happy to help you.

  Good day!

• COMMENT UNINSTALL OFFICE WITH WINDOWS 8

  COMMENT UNINSTALL OFFICE WITH WINDOWS 8

  Hello

  This forum is English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• VMWare Fusion 6.0.2 with Windows 8 - no found network adapter

  Hello

  I recently installed VMware Fusion 6 Professional edition on my Macbook Pro running 10.9 Maverick.  Then, I installed Windows XP and then immediately upgraded to Windows 8.0.  When I tried to access the Internet using Windows 8, I can't.  I received the message "no connection is available.  How do I fix this?  I have no problems when you access the internet from the host operating system.  I have found several articles in the Knowledge Base for the different configurations and tried a few steps, but still no resolution.

  
  

  1. Restarted Windows 8 and restarted Maverick
  2. Diagnostics ran Windows 8, which gave rise to: "Windows did not detect a network card is installed correctly.  If you have a network card, you will need to re - install the driver. »
  3. Firewall Windows - turns off network settings private and Public
  4. Tried to change map of network VMware between NAT and bridged (Autodetect and Wi - Fi).
  • I noticed something on the modification of the file .vmx but you have not yet tried this step.
  • I found an article saying merger allowed 5 type VM OS update by going to 'Settings' and select 'Général', but I can't find this option in Fusion 6 Pro.

  I looked for an article about my particular setup, but found nothing.  If someone can help to provide a useful link to an article for my setup or is aware of how to solve this problem... I would be very happy!

  Recent model MacBook Pro 2011

  OS X - 10.9.1 - Maverick

  Intel Core i7 2.2 GHz

  Memory - 16 GB MHz DDR3

  HD 500 GB

  VMware Fusion Professional 6.0.2 (1398658)

  Originally installed with Windows XP Professional SP2

  Immediately upgraded to SP3

  Immediately updated to Windows 8 Professional (Build 9200)

  Configured with 2 CPU cores

  Memory - 4 GB

  Hard - 100 GB disk

  Thanks in advance for your help,

  Jeff

  I would never do an in place upgrade of Windows XP to Windows 8 on a Virtual Machine!  Instead I create a Virtual Machine from Windows 8 and install directly Windows 8 by using the upgrade of media!   Take a look at: Clean install Windows 8 with upgrade media

  If you don't want to do just like first of all, I suggest and want to fix the Windows XP upgraded the Virtual Machine, do the following in the parameters of the Virtual Machine.

  Under system settings > General, change NAME and OS Windows 8.

  Under removable devices > NIC > advanced options, click on remove the network card.

  Click the device to add... and select the network card, and then click Add.

  This should fix the gaps between the default Windows XP network card settings and the settings of the network adapter in Windows 8.

• Have renewed my subscription ExportPDF, but still pop up with window 'your course has expir├⌐' when will convert via the printer driver window. Comments / help welcome thanks :-)

  Have renewed my subscription ExportPDF, have the confirmation e-mail, but still up pop with window 'your course has expiré' when will convert via the printer driver window. Comments / help welcome thanks :-)

  Hi azza675,

  ExportPDF converts PDF files to Word and Excel formats (and many others). What you describe, sounds like you are trying to convert a file * to * PDF. Have you ever started a trial of Acrobat, maybe? (So that you can create PDFs with Acrobat, ExportPDF don't allow you to convert files to PDF.)

  What happens when you connect directly to ExportPDF to https://cloud.acrobat.com/exportpdf?

  Best,

  Sara

• Share a custom folder in VM Fusion 6 with Windows 7/Mavericks

  Hello

  I searched hard and not able to find what I'm looking for.

  Basically, I can't see how you can select specific folders on the side Mavericks and share them with windows 7, and I see how Desktop/Documents/downloads/movies/music/and photos can be mirrored. I would also be able to browse the windows from my mac side, ideally the entire C: drive, but I'd settle for being able to access specific folders that I can select colouring.

  Is this something that is possible, or can I do what I do, no matter what file I need to access the mac side must be moved there from Windows 7.

  Any help would be appreciated, thanks.

  Jason

  You will need enable folders in network inside the windows prompt (I fear I don't know how to do this), then connect to the network share on the side OSX in the finder.

• My Yahoo Mail is "" forcing me to switch to Firefox by turning my functions in basic. Firefox is compatible with windows 7 for home and student?

  Hi, I have a Yahoo Mail account for many years. Now, they have turned my account in base saying that my IE9 is no longer supported and they are "" forcing me to download Firefox otherwise I have to continue with basic messaging. Firefox is compatible with windows 7 for home and studens? If I download firefox it will affect all the files I have on my computer? Will this affect my windows mail? Thanks for a quick reply.

  Fortuna2015 said

  Firefox is compatible with windows 7 for home and studens?

  As far as I know, Firefox runs on all variants of Windows 7. Firefox works better with a lot of memory, so if your system has 2 GB of memory, you may be limited in the number of windows and tabs you can open simultaneously before things get bogged down compared to a system that has 4 GB of memory.

  If I download firefox it will affect all the files I have on my computer? Will this affect my windows mail?

  As a web browser, you can configure Firefox to your default program to open web pages and links. If you do this, while some icons may change, for example, links to web pages can change to an icon of Firefox. In addition, Firefox has a built-in PDF reader, but you can still use Adobe Reader or another program to read PDF files if you want.

  Are you using Windows Live Mail or another standalone program to retrieve messages? Firefox be involved with it because these programs to get the mail directly, not not using your browser. But if you make Firefox your default for links Manager, when you click on a link in the e-mail software, it will open in Firefox instead of Internet Explorer.

  Other things:

  (1) attention to the download links at random in search engine results. You can get Firefox here (scroll to your preferred language):

  https://www.Mozilla.org/Firefox/all/

  (2) I'm sure after Firefox is started the first time, you will have many questions. The program should give you a little tour of routine, and you can use our support articles for more information: https://support.mozilla.org/products/firefox

  (3) you must install IE11 because there are still a few sites that use patented technologies and are not displayed in Firefox, such as Windows update

  http://www.Microsoft.com/en-us/download/Internet-Explorer-11-for-Windows-7-details.aspx

• HP 15 ba-015na with Windows 10: Customizing the screen saver

  Hi, I would like to customize the screensaver of my brand new HP 15 ba-015na that came with Windows 10.

  Problem is when I go to the screen saver settings all I have is the screen savers (no more six screensavers of Win10) and the selection button is not highlighted. I tried the mwnu of customization, but there is nothing that I see that would help. OD did I miss something?

  Screen saver of my laptop Toshiba Satellite old made default to the photos on the laptop and they arose at random, which is what I would have on my new HP.

  Grateful for any help. TIA.

  Hello

  You can do the following.

  Right-click on an empty area of the desktop and select Personalize.

  In the next window, select the screen lock in the left pane, then scroll and select the screen saver settings.

  In the next window, select Photos in the menu drop-down, then click on apply to save the change.

  If you want to change the location of the images are selected, click on the button to the right of the drop down - menu parameters here, you can also select the slideshow speed or activate random playback.

  Kind regards

  DP - K

• ProLiant DL320e with Windows Server 2012 Bluescreen

  Hello

  I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".

  I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
  
  I found some knowledge which mentions screens blue and with the driver for Smart Array
  http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
  But the update and version numbers do not match.

  Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.

  I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.

  The servers are offline on a clients site in a restricted environment so that they lack updates online.
  
  During this time, I downloaded the SPP Service Pack for Windows Server
  FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
  
  Does anyone have pointers?

  Take care

  Martin

  Thank you, I have not found this forum. If an admin could move it which would be best.

  Just in case anyone else has this problem is this question:

  I contacted HP by telephone support and the solution is:

  Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Take care

  Martin

• Double boot with Windows 8 and 7 Pro in a G6 - 2235us Notebook

  I have a G6 - laptop computer 2235us 64-bit included with Windows installed 8.0.
  I would like to install Windows 7 Pro and make double book with Windows 8.0 with 7 as the default to start.

  Please would you give me steps on how to proceed and also the drivers, etc., I would need to download.
  Thank you.

  You are the very welcome.

  Yes everything seems to make sense to me.

  Two suggestions...

  I would label the volume 8 of Windows and not Windows 8 Pro W8, since your laptop did not come with Windows 8 Pro.

  I believe that you can not temporarily disable secure boot.

  You should leave the setting to disabled, or you will not be able to boot in Windows 7.  Windows 7 is not compatible with secure startup.

  Or whenever you want to start in W7, you will need to first go into the BIOS and disable the secure startup parameter, restart and then select W7 to boot from, which would take a lot of unnecessary time, IMO.

  I don't know if it was me, I would leave all the parameter start secure off all the time.

  Subject to the comments preceding, I think it should work very well.

• Problem with Windows XP on Satellite L40-139

  Hello Toshiba user community!

  I'm new here but I'll cut right to the chase with my problem.

  I have a Toshiba Satellite L40 - 139 (PSL40E) model that was included with Windows Vista Home Premium installed and all perfectly installed software. I recently got a Windows XP Professional SP2 through MSDNA of my college (a Microsoft service for universities) and has installed because Windows Vista, although very looking shifted the laptop as hell.

  The installation went smoothly. I installed all the drivers that showed the question mark (as the display driver, audio, modem, etc.). I experienced a few problems. They are presented below as well as a few questions:

  1. I can't use the Fn function more. While Fn + F8 works, I can't turn the volume upwards or downwards using Fn + arrow up / Fn + arrow key or any other combination.

  2. the display driver although it shows that it is perfectly installed it seems that it is not.
  a. I do not have the optino of display properties when I right click on the desktop.
  b. I recently installed Gothic I, who had previously worked on my L40 and now after playing the intro, I do not see the menu. It's dark, but the sound can be heard as the navigation menu. If I manage to press new surprise of game, it's always black and sometimes it shows a random graphic error.
  I tried to install the Toshiba page display driver. And after that he has not changed a thing I downloaded one from the Intel site. Same thing!

  Do you know a sollution?

  3 another problem, although as unrelated to the laptop is the for my laptop model Toshiba download page only shows the "how to install Windows XP.pdf" file. " This is for the Windows XP operating system. If you change to Vista you get a lot of pilots. It would almost seem Toshiba would force me to HAVE Vista so that my Satellite wo works properly. Any ideas?

  4. do you know a good tutorial on how to install Windows XP for Toshiba L40 laptop? Especially for the L40 - 139 (PSL40E)?

  5. If Windows XP succeeded withought problem to see my hard drive is necessary to install the driver Toshiba mentions in his XP installation tutorial? I mean he should improve performance or not?

  Thank you in advance,
  I will adjust your answers tomorrow!

  Best regards!

  Robert Mocanu

  Hi Robert,.

  I think that there is no such thing as a tutorial for installing Windows XP on your machine. But you can count the installation instructions provided on the page to Toshiba, because WinXP installation is all about good pilot order.

  Have you tried to select as model number short "all"? You can find many drivers and I am sure that these will work very well for your laptop.
  I'd say reinstall with the Toshiba page display drivers and try again. And install the latest version of direct X 9.

  OK, Gothic I is not a new game, but worth a try anyway.
  Ditto for the FN keys. Just follow the installation instructions and download and run driver configurations.