Fusion 6.0.5 - cannot start EFI USB stick

Similar Questions

• Cannot start device USB (code.10) error

  Original title: device usb ayre

  Cannot start this device (code 10)

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

  Hope this information is useful.

• Cannot start T400 USB key.

  I'm trying to start a Lenovo T400 laptop computer from a USB key.  The USB key contains a version of Ghost that I start in order to image the laptop to my Ghost server.  I can successfully start a Ghost on a CD session, but I have to change the SATA settings in the BIOS to achieve this.  I'm trying to get away from the CD and change the BIOS.

  Whenever I try to start, I get the message "Missing Operating System".  Successfully, I can boot and picture one boatload of Dell computers with the same USB key, so I don't think it's the drive.  On the laptop's operating system is Windows XP.  The USB stick uses command.com Windows 98 to start and is formatted in FAT32.

  Any help would be appreciated. Thank you!!

  Hey, Zoltan-thanks for the post, it was very helpful.  I'm not fluent in Linux that I'd probably, but your mention of the HP trainer got me interested in it.  I reformatted the drive USB with the HP USB Disk Storage Format Tool and then copied back all my files.  I can now successfully start a Lenovo T400 with my USB.  I was using a Windows 98 bootdisk to fdisk and then format the drive.  (This is my first attempt at this and a colleague suggested it was the right way to go)  Even if the system with the USB drive as C drive, I guess he doesn't properly format it as the active drive.

  Thanks again for your help!

• Cannot start on USB 3.0 external hard drive?

  I have created a startup disk, so much for my new Mac Pro 2013 and finally to put in my old Mac Pro silver tour 2012.

  I did a clean install of El Capitan on an external HD. Nothing else on the subject. The Western Digital 2 TB Green is in a pregnant Sabre, connected to a USB 3.0 hub, which is connected to the new Mac Pro 2013. I tried a couple of different ways to select external HD and boot to it, but I keep priming in Macintosh HD SSD installed in the Mac Pro (2013).

  I was wondering if the problem is the hub. Should the HD be connected directly to the Mac Pro?

  Should the HD be connected directly to the Mac Pro?

  Yes, exactly.

  The reason is that a USB Hub arrives too late to be seen at boot time, so the drive is not available to start from.

  It is also a problem for the use of 'hang up the keys' at startup - beyond the hub keyboard is not visible at startup.

• Cannot start linux USB drive on the PC of Compaq CQ2903ES

  Hello

  I am trying to install linux on a Compaq CQ2903ES desktop PC. I disabled startup secure on the bios, but the system does not boot from a linux live USB.

  Any suggestions?

  Thanks in advance.

  Hi Paul,.

  I can confirm that following your directions, and starting from a DVD, I could install linux on it. This isn't what I wanted at first, but it helps.

  Therefore, the solution is:

  1. Disable secure boot.
  2. Enable legacy start.
  3. Set boot order (DVD first in legacy trunk).
  4. Start the PC and enter the code + entry.
  5. Again, start with the inserted bootable DVD.

  Thank you much for the help.

  Best regards.

• 10.7.5 host and fusion 5.0.2 cannot start or update comments from lion

  I'm moving a VM 10.7.x guest 10.8.2 using the InstallESD.dmg from the Mac App Store.

  My host OS is 10.7.5 and I use Fusion 5.0.2.

  I tried the upgrade several times, but after installation I get the message shown in the attached screenshot.

  

  I changed the OS of Lion Mountain Lion in the settings of the virtual machine, but it had no effect!

  I also tried to create a new virtual machine and boot from the InstallESD.dmg, but the virtual machine does not start. I get the circle with a cross through it.

  Why can't I create a new machine virtual 10.8 or upgrade an existing VM 10.7?

  Thank you

  Hi cookieme,

  Panic occurs because your virtual machine still contains the VMware Fusion 4.1.1 tools and that the release is not compatible with the Mountain Lion: specifically, the vmmemctl driver triggers a comments during the boot kernel panic, as you found it.  Since you're now under Fusion 5.0.2 try to restore your pre-Mountain-Lion VM snapshot (you, not you?) update VMware tools in this guest of Lion and then proceed with the upgrade to Lion mountain inside the guest.

  Please let us know if that solved the problem for you!

  See you soon,.

  --

  Darius

• Satellite U400-15E - cannot start new USB HDD

  Hello.

  Recently a bought a WD My Book external with 3TeraByte to use with my Satellite U400-15E. I can use inside Windows 7 Ultimate without problem. But if I try to boot from it (by pressing the F12 key), the BIOS does not even see the drive.

  Is it because Toshiba does not use Unified Extensible Firmware Interface (UEFI)? UEFI BIOS can overcome the limitation of 2.19 to in computers today easily, as explained in the following Western Digital document:
  [http://www.wdc.com/wdproducts/library/Flyer/ENG/2579-771501.pdf]

  This would allow me to use my new external drive to store an image Ghost drive HARD internal of my Toshiba for example. I mean 3 TB and more capacity is a reality today. When Toshiba updates their UEFI BIOS support?

  Material used:
  Toshiba Satellite U400-15E (BIOS v5.00 10/26/2010)
  Western Digital My Book Essential 3TeraByte - Firmware v1.014 (USB 3.0 interface)
  MS Windows 7 Ultimate - 32 bit version

  Thank you

  Hello

  Satellite U400 supports devices to boot according to the user manual:
  USB FLOPPY DRIVE
  HARD drive primary school
  Optical devices
  Network (LAN)

  If the USB drives are not supported.

  But you're absolutely right Re: 3 to and a larger capacity is reality today, but Satellite U400 is older model laptop and not newer ;)

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• This device cannot start. (Code 10) with a hard usb pen and readers for windows 7

  Recently, I used acronis true image to migrate my hard drive to an ssd from 250 to 500, the problem is on the new drive I get "this device cannot start. (Code 10) "error every time I try to use a USB key or external hard drive on the new image, the old image is fine. I tried all the usual alternatives to surf the web;

  Reset

  Re-creating image several times.

  uninstall all the usb drivers on Device Manager Associates,

  update drivers,

  using the microsoft error fix program (fails to answer to find bespoke online solutions).

  Any help would be useful.

  Kind regards.

  Hello Scott,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with USB devices in the computer.

  I would like to know some more information on this issue to help you better.

  (1) that Microsoft fix program error have tried?

  (2) remember to make changes to the computer, before this problem?

  In the meantime, you can try to follow the following suggestions to solve the problem.

  Actually code 10 occurs mainly because of devices and hardware driver issues or because of compatibility problems between the drivers of equipment and additional software that is installed on the windows.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you.

  Thank you

• Error USB device (this device cannot start. (Code 10))

  When I try to use my USB device, it displays error code 10 is to say that the device cannot start, I use win7 ultimate 32 bit OS

  Hi amardeeptanwar,

  Follow the steps below:

  Method 1:

  First, open the hardware and devices Troubleshooter to run the automated troubleshooting services.

  Open the hardware and devices Troubleshooter

  Method 2:

  See the following article in the knowledge base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Headset (headphones and microphone) USB - this device cannot start - Code 10

  Hello

  I just bought a USB headset today and tried to use it.  I had a driver error message when first plugged in.  The help system has proved to be unnecessary.

  After doing some research on this forum, I checked the Device Manager and found that the indicatses of properties of USB audio device "this device cannot start. (Code 10) ".  Forum entries suggests that a lot of people have similar problems.

  Mine is a new installation of 64-bit Windows 7 on a new hard drive, but on older hardware of the PC - Asus A8N SLI Premium.  Someone at - it had suggestions as to the resolution of the problem.  Note that a normal headset worked fine yesterday (but I broke it) plugged into the jack Sockets, but I wanted to use a USB headset to avoid having to continue to go to the back of the computer to replace my system 2.1 speakers.

  Thank you

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link below and check if it can help solve your problem.

  http://support.Microsoft.com/kb/943104

  Please reply back and let us know the status of the issue.

  Azam - Microsoft technical support.

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Mass storage device USB cannot start. Why?

  When I attach a USB to my computer, it is detected, but the driver cannot be found. In drivers and the printer it says troubleshooting.

  It reinstalls the device drivers and shows the rest of the dialog box whenever I run the troubleshooter.
  [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close] [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close]
  Now, in the mass storage device properties, it shows the device status as "this device cannot start. (Code 10) »
  "Rental: Port_ #0002.Hub_ #0004" I also put driver, but it is up to date.
  Driver version: 6.1.7601.17577
  Driver date: 21/06/2006

  Hi Jessica,.

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link given below which will help you solve this problem.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• USB keyboard & mouse error "Windows cannot start this hardware device - code 19.

  Original title - USB keyboard & mice problem

  Hello

  I'm under 64-bit Windows 8.

  Problem: Keyboard Logitech wireless & mouse (S520) does not work.

  1 week ago that I tried my HARD drive on different USB ports on my PC. I disconnected the keyboard and mouse wireless receiver and reconnected. Since then he has stopped working.

  In Device Manager, it has a typical yellow marks against HID keyboard and mouse. I tried to uninstall and reinstall, off and on, makes no difference.

  When I go into the properties by right-clicking, the status is 'Windows cannot start this hardware device Code 19'.

  I tried Googling this error but I found that the solution is only for CD/DVD problems.

  I uninstalled USB Root Hub that is not made any change in the problem.

  Have restarted severl times and power disconnected from the PC and thus reloaded.

  I am currently my PC from iPad using the app Splashtop.

  I really hope that someone can help me.

  I've restored my windows from 16 April that solved the problem. However, I learned a lot about the registry keys and all.

  Thank you for taking the time from your busy schadule and answer my stupid questions.

  Thank you.