G3 255: car for the G3 255 HP adapter

I'm looking for a car adapter for my laptop G3 255 that I use on my boat.

I am currently using a frequency with the HP AC adapter control and you want to replace with more effective DC DC 12V converter. The power required is 19.5V 45W and the laptop has the blue tip with the center pin.

If there is no adapter 45W with the pin of blue tip/Center available to the United Kingdom, does anyone know how to wire the center pin to work with a 19.5V standard car adapter. Is it just a simple resistance of 470K ohm or something "smarter"? I can source the blue peak record separately.

Thank you

Roger

Hi REO

Just for you say new adapter (as stated in my previous post) arrived today (36 hours after the command - pretty good service) and seems to work very well using the battery of 12V on the boat.

Thanks for your help.

Roger

Tags: Notebooks

Similar Questions

  • How can I set up a network in the car for the video stream to iPad?

    Hello

    I'm looking to determine the best way to stream video to iPad in the car.

    The children had a mini iPad each with only 16 GB of HD.

    This does not need to store lots of video material.

    So, I'm looking for the best way to allow the video stream in the car.

    I have about 1 TB of films in different formats on a mobile HD and I was wondering what would be the best way to give children access to this material when driving. My car has no other connectivity or any what built-in Wifi.

    There is no need of the Internet, I just they are able

    I've searched the Internet to find solutions, but much to my surprise, there is only a limited amount of info

    Thanks in advance

    There is no way that transmit video for example:

    YouTube, netflix, BBC iPlayer, Hulu more demanding and Internet connection

    If you live in the United Kingdom:

    EE (A Mobile to the United Kingdom network provider) a WiFi car service go to the site

    or you could get the cellular iPads and start a hope of data plan that allows to

  • the power cord of the ac for my iphone charger 6 will work in the USB port in the car for the load

    Looking for a car charger for my IPhone 6.  Wondering if the cable operator in the House will work in the USB port on a car?  It hurt my phone.

    Yes you can. As long as you have in the car's USB port. It can load more slowly then wall charger, but it works! I load mine in the car all the time

  • Can I buy Apple Care for the Apple Watch bought at target?

    I was gifted a Apple Watch bought the target. I always buy the Apple Care for my computers, tablets and phones by Apple. I have read the General conditions but can't find where it says I can't buy it if it is not purchased directly from Apple. I want to buy the Apple Care through Apple about 5 days after the Apple Watch Sport has been bought. I guess it's ok, I'm good?

    Yes. Click here and see the notes.

    (137377)

  • Best practices for the collection of network adapter for network management

    Quote from http://www.vmware.com/files/pdf/techpaper/VMW-Server-WP-BestPractices.pdf :

    Aggregation and network management networks:

    To set up a team of network for the management network adapter, configure the network adapters in the vSwitch
    configuration of the ESX/ESXi host, for configuration active / standby.

    The vSwitch must be configured as follows:
    The load balancing • route = based on the original (default) virtual port code
    • Restore = 'No '.
    • vSwitch0: two physical network adapters (for example: vmnic0 & vmnic2)
    • Two groups of ports (for example, vMotion and management)

    In this example, the management network works on vSwitch0 as active vmnic0 and watches over vmnic2.
    The vMotion network works on vSwitch0 as active vmnic2 and watches over vmnic0.

    My configuration:

    The two active adapters (not active / standby)

    Failback = 'Yes '.

    Not clear if the network management and vMotion are both active on the same vmnic or different.

    Question:

    Is smart enough to keep the network management and vMotion on different vmnic SE to ESXi 4.1 or I should change to active / standby config and make sure they are on different vmnic?

    It would make a noticeable difference?

    Ah yes, you are right in your configuration then.  I would never mix NIC vendors in any type of trunk, I saw things get funky now and then.  VAAI won't give you an advantage when you do a storage vMotion, normal vMotion will always use the same amount of traffic, because memory cards must always be copied between hosts.  It is advisable to devote at least a card NETWORK management and at least one NETWORK adapter to vMotion, if you can have two vSwitches with two NIC each then I would use explicit order of failover you mentioned.  Hope that helps!

  • Dynamic JNDI name for the database in BPEL adapter

    Hi all

    I have some problems trying to give the JNDI location for the dynamic database adapter (10.1.3.4). I already went through the following link, but that has not worked for me: http://www.oracle.com/technology/pub/articles/bpel_cookbook/carey.html

    The example below works, but only the first round. Second time around the first tracks JNDI value gets stored and connects to this database.

    That's what at least worked the first time.

    I set the JNDI with a variable defined in the definition of partnerlink in the bpel.xml

    In Bpel. XML

    < partnerLinkBinding name = "updatetbl" >
    < property name = "wsdlLocation" > updatetbl.wsdl < / property >
    < property name = "CONN" > eis/DB/na < / property >
    < property name = "retryInterval" > 60 < / property >
    < / partnerLinkBinding >



    In the updatetbl.wsdl file

    < service name = "updatetbl" >
    < name of port = "updatetbl_pt" binding = "tns:updatetbl_binding" >
    < jca:address location = "$CONN" / >
    < / port >
    < / service >


    At runtime, I change the variable CONN partnerlink in embedded Java.


    Try
    {
    Element targetAdapterElement = (Element) getVariableData("Invoke_getFromTbl_OutputVariable","getFromTblOutputCollection","/ns2:getFromTblOutputCollection/ns2:getFromTblOutput/ns2:SRC_JNDI");
    getLocator ().lookupProcess("JndiIssueTest").getDescriptor () .getPartnerLinkBindings () .getPartnerLinkBinding ("updatetbl") .setPropertyValue ("CONN", targetAdapterElement.getTextContent ());
    ("updatetbl").GetPropertyValue ("CONN"));
    }
    catch (Exception ex)
    {
    addAuditTrailEntry ("Error is" + ex);
    }


    It works fine the first time but the second time I launch it looks like a different value of CONN, it connects somehow always using the first value of tracks!

    If I redeploy or erase the cache WSDL, it works. But we intend to run it several times to several environment manually or programmatically clearing WSDL is not the right solution.

    Can someone tell me what is the standard process to do to make it work every time?

    Thank you
    Shaf

    Shaf,

    Please refer to the thread of e-mail for more details. If you want I can send you (send me your email id) the sample BPEL process that uses dynamic JNDI.

    Re: How to outsource the JNDI name (dynamically set the JNDI name)

    Thank you

    Sen

  • Hi can anyone give me the number to contact customer care for the Malaysia? I bought adobe membership yesterday but am facing a host of issues since then

    I bought the subscription yesterday but a number if issues are popping up and I am unable to use any of the same

    Can someone please give me the number of Malaysia customer please

    (1) I am unable to download the creative application of clouds. It shows it as trying to connect to the server and stay like that

    (2) when I am connected and try to "manage my account" I don't get the page. It times out

    (3) I am a paying member, but in my options learning and support after I click on contact on I only get the option to ask community.

    He was very confused.

    I am very keen to speak to a customer care agent, if someone can give me the number, please

    Please contact the Support from Adobe on the Customer Contact

    Kind regards

    Hervé Khare

  • HP Pavilion dv9700: replacement for the hard drive DV9700 adapter.

    Hello, I put a new 1 TB HDD in my laptop of co-workers for her and comes to know there is no adapter on two hard disks to connect to the motherboard, where can I get one of these adapters? I saw a post not a few minutes ago, but he didn't say where I can get a.

    NO, I don't want the caddy, I mean the slip which connects the SATA plugs weird connections inside the bays 1 and 2.

    In addition, why in the world did you choose to use these connections owners, have you tried to set a new standard or something? Now, my co worker must wait for God knows how long it will take to get his laptop in working condition.  I'm so happy that I chose Custom build my personal computers.

    What happened to the original one?

    I found this, seems to be the best price even if you don't need the Caddy

    http://www.Amazon.com/Pavilion-dv9000-SATA-drive-caddy/DP/B005GJ8OIK

    I also found this one, not sure if it's the same, but seems to be

    http://www.Amazon.com/Compaq-HP-dv6000-connector-DFHS22FR685/DP/B0041LDAUQ/ref=pd_sim_147_1?ie=UTF8&dpID=31qHBKfvvnL&dpsrc=Sims&preST=_AC_UL160_SR160%2C160_&refRID=0X8K0Q33N0PXNNEAN363

  • HDX 9010nr drivers for the Microphone, webcam and adapter TV hybrid.

    I have everything what it for Windows 7 running on my HDX 9010nr, except:

    -Microphone

    -WebCam

    -Adapter TV hybrid

    Otherwise I do it a lot.  Still love my HDX 9010nr!

    Please let me know if you know where I could find the three missing drivers.

    Thank you.

    Professor.

    The MediaSmart Webcam software is here:

    FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45178.exe

    Try this driver TV Tuner:

    FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45500.exe

    The microphone works via the audio driver (IDT), which should be available in Windows Update.

    -wes

  • Question about the care for Portege Z30A tool batteries

    Hello

    I used some thinkpads with the function to take care for the conditioning of the laptop battery.
    A useful feature is to disable if you plug the power adaptor so charged above for example, 75% of battery charge.

    It monitors the condition of the battery and advises when a cycle of preparation is necessary.
    Is there a such use for the Porteges or should I use a third party program?

    How about BatteryCare utility?

    It is a free utility that helps you keep your laptop in good condition battery.
    It monitors the battery discharge cycles and helps to increase independence and improve life expectancy. In addition, it provides detailed information battery and monitors the battery discharge cycles.

    But Toshiba also provides own software called Toshiba PC health monitor.
    It gives you a graphical overview easy to read things like the temperature of the portable computer, the fan speed and the condition of your battery.

  • When the warranty coverage begins for the purchase of the online store?

    I bought my Macbook Pro online at the end of April 2015

    It was shipped may 6 and I received it on May 17.

    Cannot find anywhere, if the guarantee begins

    When

    you receive

    or

    order you

    or

    When Apple ships the product because the credit card was charged on this day

    If you ask to know when to buy the AppleCare extension, just buy AppleCare now. Even if we tell you the exact day guarantee began, you may need to buy AppleCare on the eve of the 1st birthday instead of the actual birthday because of the way that they time.

    Otherwise, please call 1-800-APL-CARE for the official response.

  • Will be a docking station for the earlier works to connect with the lighting cable, if I have a match?

    I have a really great dock I want to use it with my new iPhone. but he has the old type of connector. If I buy an adapter, it will only load, or it will play music from the phone as well?

    If you buy an authentic Apple adapter, this should work, although I saw some errors with a 30-pin lamp CAP in my car for the connection of the iPod.

  • I NEED TO KNOW WHY THE _ THERE IS NO COMPATIBILITY FOR WINDOWS XP MODE 7 HOME PREMIUM EDITION. AND WHY HAVE WE NOT "WAGES" TO ASK FUNDAMENTAL QUESTIONS AFTER THAT WE PAID HUNDREDS OF DOLLARS FOR THE SOFTWARE?

    I PAID A LOT FOR NEW WINDOWS IN NOVEMBER LAST, AND I ARE NOT ELIGIBLE FREE SUPPORT?  THAT BREATH!  TEXAS INSTRUMENTS GOT GREEDY IN THE 1980S AND TOYOTA IS GOURMAND RECENTLY, NOW THEY'RE LOOKING AT BANKRUPTCY!

    SO MY QUESTION IS IS THERE A DEMO FOR LATER VERSIONS OF WINDOWS 7? BECAUSE I NEED OBVIOUSLY BUT XP COMPATIBILITY MODE I WANT TO BE 100% CERTAIN THAT THIS WILL FIX THE PROBLEM OF MY GAMES CRASHING THE SYSTEM WHICH REQUIRES A REBOOT.

    FOR MICROSOFT REAL, JUST HOW GREEDY YOU NEED BE?

    I ARE NOT ELIGIBLE FREE SUPPORT?

    If you buy retail (non OEM) then Microsoft generally taking care for the first two free incidents. Please consult the documentation provided with your copy of Windows 7.

    IS THERE A DEMO FOR LATER VERSIONS OF WINDOWS 7?

    I think that the only DEMO of Windows 7 available currently is approved specifically for the IT professionals. The demo lasts 90 days, but I "think" that Microsoft recommends that you be part of a company to participate. I don't know how they would feel if the average end user participated in the demonstration program.

    I NEED OBVIOUSLY BUT XP COMPATIBILITY MODE I WANT TO BE 100% CERTAIN THAT THIS WILL FIX THE PROBLEM OF MY GAMES CRASH THE SYSTEM

    I don't 'think' the XP COMPATIBILITY MODE in Windows 7 will help you a lot. I "think" it uses Para-virtualization, which is unfortunately too slow for almost all games. I was able to run some software in a virtualized copy of Win XP, but the software was not a lot of resources like computer games is.

    I am surprised that your games break in Windows 7. I run 32 Bit Win XP Pro SP3 here at home, but I have recently built a machine Windows 7 Home Premium 64-bit with 4 GB of RAM for my mother and it seems to work. My mother runs a Sims 3 and Sims 1 without problems, but Sims 2 gave here a few rendering problems that I don't think are associated with Windows 7.

    I recommend that players stick with Windows 7. Although there are other available operating systems, Windows 7 is probably the best operating system currently available to players. High compatibility and DirectX 10 + Support + 4 GB of RAM (or more) supported in Windows 7 Home Premium 64 Bit make Windows 7 a good set of OS. Trust the creators of the XBox of world-class, Super Sidewinder Joystick and high-speed Direct X technology.

    BTW: Now you can upgrade to Windows 7 Home Premium to Windows 7 Pro for only $ 90

    http://store.Microsoft.com/Microsoft/Windows-Anytime-Upgrade-Windows-7-Home-Premium-to-professional/product/C562285E

    Probably upgrade will not make your game better, but it will give you the possibility to have a safer computer.

    Final note:

    I wish Microsoft could release a Version of Visual Studio 2010 Standard... Who doesn't have my feathers ruffled a little because I can't see paying $800 for a compiler...

  • Can I register for the Apple care after that my mac is broken?

    I completely forgot to sign up for Apple Care and the store does not do it automatically. Now my motherboard needs to be replaced because it fell randomly in a day, a tgat problem many users seem to have; and it costs $1115NZD, which is an absurd amount of money.

    If I enroll apple care now it will cover expenses? My laptop is still 2 years.

    # It is too late. You cannot save it after the expiration of the original warranty.

  • Question about the universal power adapter car for Satellite U500

    There are different types of adapter car 12 volt on the market with different powers - that's good, but some "automatically select the output voltage.
    These units have a reputation of reliability or security for the laptop or are they to be avoided?

    Hello

    The problem is that in most cases these s universal adapter takes care of different intensity values
    You can change only the value of the Volt, but not the ampere ampere would change automatically and depends on the selected Volt.

    I would not recommend these universal adapters because the laptop needs some value ampere
    I recommend buying an adapter that is designed for this laptop to avoid some hardware problems

    Get in touch with the local ASP to get such part

Maybe you are looking for

  • Outlook has started to get a connection not approved when using firefox

    Outlook started having no reliable connection error when using firefox. Not sure why it started, but all the few minutes that it times out and I have to re - open outlook from google. He does not receive this error on IE or firefox android. I use win

  • Tuner not found on the Qosmio F20-149

    Hello world I have a Qosmio F20-149. After the transfer of my place of residence in another city in the same country) I suddenly see that my media reports "tuner not found" when I try to access the TV. Also, when I try to configure the internet conne

  • Satellite P100-188: tips on battery charges

    I just bought a Satellite P100-188 and this is my first laptop, it says in the manual "once the battery is fully charged, it is recommended that you use the computer only on battery power until the battery completely discharges.» This prolongs the li

  • Why additional results stage does not meet the test report

    I have a file of sequence with several subsequences and I can't using step of additional results. I use the step of additional results in a subsequence and the specified results are added to the report test, but when I use the additional results stag

  • Drag-and-drop files from a PDA

    Hello I have a test tool automated radio (PCMCIA card) on a PDA at work (a DELL Axim). This benchmark to generate HTML reports. I have no the ability to control the PCMCIA device because I can't program under Windows CE and the manufacturer of test b