Tuner not found on the Qosmio F20-149
Hello world
I have a Qosmio F20-149. After the transfer of my place of residence in another city in the same country) I suddenly see that my media reports "tuner not found" when I try to access the TV. Also, when I try to configure the internet connection, I get an error message of the MC asked me to restart the computer or contact technical support. Can someone help me with this?
thanking you in anticipation.
Best wishes.
Hello
I'm not an expert but tuner not found message cannot occur without any reason. There seems to be some hardware related issue and has nothing to do with your home.
If you are 100% sure that everything was ok a few days ago, I recommend you to roll back OS to an earlier time using System Restore tool. Please also check status of TV tuner in Device Manager? Is this all is well?
Tags: Toshiba
Similar Questions
-
Is there could change the FSB to Qosmio F20-149?
Is it possible to change the FSB to the qosmio F20-149?
Or can I disclose me the PLL of the FSB?
Thank you very much...
Boton / terrasight.net
Hello
I put t think that it of possible to change (to increase) the FSB on a laptop.
Nowhere it s not advised to change something on the CPU because of the overheating of the issue and use of OS unstable.I found an interesting site on the FSB.
http://www.CPUFSB.de/FAQ.htmConcerning
-
Qosmio F20-149: I accidently deleted the folder Power Saver
Hello
I have problems with the energy saver, but I could not uninstall and reinstall so I deleted the whole directory... an error! So can someone download me its Repertory Powersaver so I uninstall etc still files once and I can uninstall correctly it!
I have a Qosmio F20-149, but with luck another Qosmio Version will do as well, too!
thx for the help
I don't think it's a good idea to install files to watch foreign power on your operating system.
I recommend you to download the energy saver (if you have it t n), and then install it again.
If the installation does not start because of missing files, so you must first enter in the registry, and then delete all entries of power gain.
And repeat the installation procedure. -
in windows media center live tv set up the problem. it pop ups tuner not found.
TV a hinged ir extension decoder but why I couldn't jooin a network m.?
This is how the set up works. These article are a good read through:
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01187871
http://Windows.Microsoft.com/en-CA/Windows/adding-TV-tuners-Media-Center#1TC=Windows-7
Here, the discussion might help your cause-
-
Error: "Tuner not found" with Windows Media Center
Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.
I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.
There is a great thread towith people have reported this problem with this tuner.Unfortunately, it looks like the only solution people have found is to replace theTuner with another brand.I don't know if it's the hardware failure or something else, but looking at thiswire, if it was ME, I cut my losses and replace the tuner.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
I'm thinking there must be a registry fix just for this.
I used to have two sticks of tuner TV USB in my PC (Win7 Home 64 bit), but one of them went belly.
Now when WMC starts a scheduled recording, I have a pop-up balloon reports "Tuner not found". But the TV very well played and recorded normally.
Is there a simple solution for this? Very annoying. THX.
In WMC, go to Settings/tasks/TV Signal and set up your TV Signal again.
WMC has been implemented with 2 tuners and will continue to be a tuner missing until you set up again.
If you replace the missing tuner, or replace it with another tuner, you need to configure WMC again.
-
I tried to update my iTunes this weekend. Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer. I tried to re - install outside of iTunes and repair. But no luck. Should I uninstall iTune and then re-install? Help.
These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in
- C:\Program Files\Fichiers Files\Apple\Apple Application Support or
- C:\Program Files (x 86) \Common Files\Apple\Apple Application Support
where the name of the Program Files folder may vary depending on the region.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
Wacom Cintiq 13HD - "a supported Tablet not found on the system."
You just bought a 13HD Cintiq (no touching) and installed the drivers Wacom on my Macbook Air w / OS X 10.11.4. It works as a second screen, but I can't get the pen to do anything and when I look in the preferences system under the Wacom component I see nothing except a message stating "a supported tablet was not found on the system." I have installed the latest driver and two former previous drivers and restarted several times now. Any help?
That's what I see in the system Pref Pane:
Have you checked the forum Wacom for possible solutions?
-
fully patched W2000 SP4 - try to install or update flash adobe gives "the procedure point SetDllDirectoryW entry is not found in the dynamic library KERNEL32.dll." said ths for both FF and IE versions of the flash Installer... it just started recently... at least since the beginning of 2012... mcafee or norton stuff has never been near this box... This is (vascular) limited to install or update flash...
NOTE: had to choose ' Other/unknown' for windows option version in these forums, because some spark deletion of the option "Windows 2000":? :(
I'll just post a link to workarounds to the case where someone else wants:
http://forums.Adobe.com/thread/965334
Because Windows 2000 is out of support and has had no updates Microsoft security since July 2010, I'm puzzled why people are so concerned about having a Flash Player update. The exploits are likely to be totally confused.
-
AutoCorrelate not found in the DLL
Hello
I get the runtime error after when I try to use the function AutoCorrelate in Labwindws 2012.
Function AutoCorrelate: (return value is-5094 [0xffffec1a]). Function not found in the scan DLL library.
I have included advanlys.h at the top of my function and added the LFP to advanced for my custom libraries of CVI analysis. I am tring to use the sample code I copied and pasted from the online help documentation. I can't locate the corresponding advanlys.dll the advanlys.h wants to make reference.
Example code below:
#include "advanlys.h".
Double x [256], rxx [512];
int n; n = 256;
Uniform (n, x, 17);
AutoCorrelate (x, n, ALGORITHM_CORCOR_NO_NORMALIZATION, rxx);
Same here, but I noticed that my sharing folder is the same as my old CFS files developed with CVI 8.5.1.
CVI shared Dir = "/ C/Program Files (x 86) /National Instruments/Shared/CVI.
I looked more closely in this folder structure and concluded that:
C:\Program Files (x 86) \National Instruments\Shared\Analysis
published the nianlys.dll of CVI 8.5.1. My new installation of 2012 has made this squash a copy later.
Maybe it's the first of many cases where older versions with new conflict. I regret trying to keep the old version of the CVI on this machine to support the previous facility.
Thank you for leading me in the right direction!
Best regards
Phil
-
I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.
Jim
If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.
MowGreen Services update - consumer safety
-
I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc. Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.
When I try to install the tool in stand-alone via the following links
KB982331
KB981715
http://support.Microsoft.com/kb/981715 and select download package now.
KB982312
I get an error correctly indicating that "the expected version of the product is not found on the system. So they will never install successfully but Windows Update won't jump that updates are not necessary.
Does anyone know how to remove these updates to install?
Thank you
Chuck
Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack. I chose to ignore the updates and keep the ability to view Office 2007 extensions.
In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."
-
whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.
Hello
Thanks for posting your question in the Microsoft community forum!
I understand that you encounter printing problems in CorelDraw. I will try to help you with this.
(1) is the issue limited to only Corel Draw?
I suggest you to restore the default values by pressing the F8 key while the program starts.
Reference: File not found valid environment...
http://CorelDRAW.com/forums/t/4156.aspx
If the problem persists, I suggest you contact the link mentioned below for the best support.
Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
Original title: Plustek OpticBook 3600 is not installed
Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.» The required section was not found in the INF"
PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers. Operating system is Windows XP Pro with Service Pack 3. The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot. I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is. Any help would be appreciated!
Hello
You can try the troubleshooting provided in the link below steps to fix the problem.You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device
http://support.Microsoft.com/kb/841567
Note:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
See also:
Error message: cannot install hardware. An error occurred during the Installation of the device
-
I have Windows XP, the border is my home page, when I click on a story, Yahoo page appears, 404 not found, sorry, the page you requested
not found. If I go to Google Chrome, it works perfectly! I do not use Chrome because their title stories are not up-to-date.
http://answers.Yahoo.com/question/index?QID=20080118090732AAeKoF1
Border is powered by Yahoo, try the thread above, see if it will solve your problem.
Maybe you are looking for
-
Vibe Lenovo x 2 there developed otg?
-
C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if t
-
BlackBerry smartphones can not see "Other calendars" Google
Hello! I have an institutional Exchange calendar and then my private of Google. I'm not under Google Sync, but the flame did a great job to keep things synchronized and nicely merged. However, I can't see other calendars that I see in my office? I
-
Number of RTF formatting is not reflected in exit excel
Hi allI have a model RTF containing three columns numbersSTART BALANCEPERIOD ACTIVITYCLOSING BALANCEThe beginning balance and the activity of period are XML data fields while the closing balance is a computed column. The problem I encounter is that e
-
How do I 'flatten' an Illustrator file?
I have a logo that I work with a lot of layers and sublayers and now I would like to reduce or "flatten" all in a single layer to use as a logo without the clutter many layers that it took to make this work. I tried "flatten" but which retains even l