G3 266 HP: Hi there

Similar Questions

• DV2726ca_DV2700 HP Pavilion Entertainment PC

  PC has windows Vista I installed Windows 7 Home Premium 64-bit, so I could Max out at 4 GB RAM

  The RAM is of 667 mhz DDR2 I 2GBx2 I do not understand why the ram is running at 266 mhz instead of its 333 mhz.

  I could of swarn RAN the computer laptop memory at 333. I went into the BIOS and there is nothing I can change.

  CPU - Z and PC WIZARD 2012 from the same company, as saying that my ram is running at 266

  is there a way to access a BIOS with the settings that I can actually change?

  front side bus 533 mhz:

  http://h10010.www1.HP.com/wwpc/ca/en/Ho/WF06b/12139188-78299199-78299212-78299212-78299212-81135007-81575336.html?DNR=1

  This is the processor not the memory bus bus and it is possible to operate the faster memory than the bus of processor (in desktop computers that actually have the available memory in the BIOS configuration), but usually performance is optimized by running at the same speed.

  CPU - Z Gets the info on memory possible speeds of the memory, not the motherboard. It was very common for HP ship systems that run at 533 mhz, DDR-667 2 because downclocks memory and they could more easily use the memory in a wider range of machines and get better prices by buying a lot of him.

• Is it possible to upgrade the processor on a 266 MHz PowerMac G3 minitour

  I came across a 750 MHz on eBay G3 processor, mean't to improving a Mac PowerPC with a slower 233 MHz or G3 266 MHz processor. It is a good idea, I like my G3 minitour, but the 266 MHz really choking when you play games like the Sims high performance. I was wondering if this upgrade is a healthy option for the computer? I'm really not a lot of ins and outs of a motherboard, but if this upgrade is not a total fantasy and pretty easy to accomplish without slaughter my computer I would love to give it a go!

  Thank you

  Aidyn

  The '750' is the number assigned to the PowerPC G3 processor: a PowerPC 750.  The processor speed is not 750 MHz.  A few years ago, when your beige G3 was not quite so old, there were third, faster G3 and processor G4 upgrades marketed for these models.  Even if you bump the processor speed, the speed of 66 MHz system bus will pass and you have dedicated graphics bus AGP.  All PCI video cards are installed in one of the 33 MHz PCI slots.  The offset that you are experiencing is due to a combination of hardware architecture very up-to-date of these computers in 1997/1998.  You could install a faster ZIF (Zero Insertion Force) processor upgrade card, but I don't think that you will experience results that you would hope for.  If I spend the money on a card processor used for a beige G3 in 2016, she will have to be a G4 and very expensive.  All of the money invested in upgrading to a beige G3 will exceed the current market value of the computer.  You can read old comments on these upgrades to accelerate your Mac 'area G3'.

• Satellite A40-211 - there a 512 MB or 2 x 256 MB RAM?

  Hello!

  I have an A40 - 211 (its the Netherlands, maybe not to the United States under this code). It has 512 MB of Ram and I want to upgrade by adding an another 512 MB to 1 GB Ram. I know that my laptop has 2 Module, but I'm not there 2 * 256 or just a 512 MB and one other Module is free. If it has 2 * 256 MB, do I add a 512 MB and it works with 256 + 512 MB?
  I see the AENEON (INFINEON) PC2700 DDR SODIMM 333 MHz is the Ram low price. Is this good or not?
  (Sorry if my English is not so good!)

  the link with the full A40-211 features:

  http://www.pricecat.de/en/p/Toshiba/PSA40E-0C1UK-G3/satellite%2520A40-211.htm

  Hello

  The laptop has 2 memory slots, and it seems that both are busy! In this case, the laptop came with 2 x256MB.

  > It has 2 * 256 MB, then I add a 512 MB and it works with 256 + 512 MB?
  Yes, you can use 256 MB and 512 MB set.

  > I don't see AENEON (INFINEON) PC2700 DDR SODIMM 333 MHz is the Ram low price. Is this good or not?
  Usually the Infineon modules are not bad. The performance is optimal.
  I always recommend the use of modules of brand and not no-name

  You use PC2100 (266 MHz) DDR SODIMM 200 pin. These specifications are supported!

  If you wish, you can consult this site. It shows the compatible modules:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7274&ft=m&St=3

• Satellite L20-101: I think as 667 Mhz module runs only with 266 Mhz

  Hello

  I bought 2 x 1024Mo DDR2-RAM for my L20-101.
  First I tried 533 MHz, but the laptop does not work with them, so I bought the
  Version of 667 MHz.
  CPU - Z says that the FSB:DRAM - ratio is 1:2 If the two are in fact run with just 266 MHz.

  I've updated the BIOS with the latest version of the Toshiba-home page, but nothing has changed.

  So finally, my questions:
  1 perhaps CPU - Z is false (I don't think so...), are there any other good programms to check the parameters of memory?

  2. If the values in the program are correct: where can I change the value of the report? Is it possible to see more than a few settings in the BIOS or is it a rider?

  Thanks for your help

  Hello

  First of all it is important to mention that the Satellite L20-101 supports a FSB of 533 MHz.
  So the DDR2 400/533 256 MB (PA3389U - 1 M 25) and DDR2 400/533 memory modules 512 MB (PA3412U - 1 M 51) should work and are 100% compatible!

  If you use the module of 667 Mhz, it runs only at 533 Mhz due to the limitation of the front side bus.

  In addition, I think you have misunderstood something.
  Here are the modules DD2 and so the CPU - Z recognizes the speed of the modules as 266 MHz (2 x 266 = 532 Mhz)
  If everything seems to be ok!

  PS; You can also use the other tool called Everest home edition. It s a freeware and very useful to run a diagnosis system and equipment

  Greetings

• Very slow - Window 7, 266 mHz i7, Geforce 9800 GTx graphics card - computer was reformat hard drive, reloaded windows 7 and without other installed programs/games.

  My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card.  I had this computer for about a year.  The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam.  The computer ran more slow and more slowly, gradually.  I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow.  Finally, I backed up my files and reformat the hard drive and reloaded windows 7.  My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
  Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
  and fall at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  -----------------------------------------------------------------------

  Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Is there a way to upload my iWeb site?

  I lost my iWeb domain, is there a way to access my site and download it?

  Kind regards

  Paul

  Yes, you can access your site on your server and if you connect to your server with a program such as Cyberduck ftp, then you can download your iWeb site files, but remember that as he is a published site, these are all html files and it won't be good for you because iWeb is no import , so will be unable to open html files.

  If you have lost your domain.sites files that iWeb uses, then you will need to re - build your Web site from scratch, but as iWeb is not taken in charge and for the past 4 years, I would re-build your site with another application that it is actively updated.

  Take a look at EverWeb here.

• Is there a way to read the settings in a .pst file?

  Hi all!

  I looked everywhere for info on this and found nothing. Anyone know how to read the settings contained in a .pst file? I found some that I really like, but would like to know what they are doing. In other words, what are the different used FX and what are their settings? I would use some other users have created as a starting point to create my own channels of FX. Open in a text editor doesn't show something like:

  @^@^@D^@^A^A^@^@^@^@^KEMAGPPST^@^@^A^H^@^@^@^@Âp^@^@^@^@^@^@^@^@^@^@^@^@^@^@¿< 80 > ^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @? < 80 > ^ @^ @@ ^ @^ @^ @

  Is there a way to show somehow what they do and what they use the settings?

  Thank you!

  You're right, the settings file contain only of the code when opened in a text editor.

  But why don't you just open settings in a project, this way of seeing exactly what Plugins are loaded. Opening of the plug-in window will show you their parameters.

  The only restriction is that GarageBand has only a limited view of Plugin window which can not show all settings. To do this you must open in Logic Pro X.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• Is there a way to trade in my iPhone 16 6 s together for a gold iPhone 6s 64 gig

  Help

  I'm not aware of anyone who would be willing to do this job.

  However, you can exchange your phone and probably to pay extra to get the 64 GB.  Or you could sell your 16 GB and use the money to buy a 64 GB.

  There are a lot of places accepting phones on trade.

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

• Is there a way to repair a movie?

  Added a dialog to a movie that was properly recorded in a file previously, but now it won't open. Is there a way to 'fix' a movie?

  I'm not sure I understand. Which, in my opinion, you say that you have added a voice over a clip in your movie and it played ok but after have closed and reopened iMovie movie is fine but voice over does not play. He will play in the project media browser?

• I followed these steps several times, but he still has to work to rebuild the index.  Is there something else in the way of this work?

  Have you tried to rebuild the index spotlight several times, but it didn't work. I followed the steps through the system preferences, but there is no result for the rebuilding of the index.  Is there another way to do it, or is there another problem preventing it from working?

  Do you mean the following steps:

  Rebuild the index on your Mac - Apple Support Spotlight

• How to see if there are Java in my Mac?

  Hello!

  I saw this article.

  https://www.Intego.com/Mac-Security-blog/adwind-rat-malware-everything-you-need-de know.

  

  Basically, as long as I don't have Java, I have nothing to fear? I've read that recent Macs lack Java (thanks, Apple!), but is there a way to check if there is no Java at all? It would be easier.

  I checked the preferences system and if there is Java autour, there should be this symbol of Cup of steaming tea somewhere in the level below the system of preferences?

  I want to just make sure that I don't really have these Java garbage.

  https://techhelpkb.com/find-Java-version-in-Mac/

• I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  How do you know that she can always use Facetime?

  Could she learned/guessed the password restriction?