G4 play impossible to copy the files from the PC in MTP mode

Similar Questions

• Copy a file from one computer to another

  Hi all

  I am trying to copy a file from a computer (where I program CVI) to another computer on the same network. How do I do? Can I use library functions plug supplied by C or y at - it of the other libraries available in labwindows?

  Thank you

  Kanu

  CopyFile () in the library of the utility accepts UNC paths, so you can do something like this:

  CopyFile ("MyFile.txt", "\\\remotePC\\remoteFolder\\myfile.txt");

  Avoid conflicts between this function and the corresponding Windows API function with the same name: read the online help for explanations.

  Simpler is better, don't you think?

• How to copy a file from one folder to another?

  Windows 7, my images: how to COPY a file from one folder to another?

  Right-click on the file and drag it to the other folder. Release the button on the right and click on copy here.

• Impossible to copy the text to clipboard error - I had tried everything include uninstall firefox and re install. I tried to disable all plugins and addons. I have to c

  Impossible to copy the text to clipboard error - I had tried everything include uninstall firefox and re install. I tried to disable all plugins and addons. I have to click 20 times on text to paste in all websites. What should I do about it? I use FF 22.0 worm, win 8 and the problem just a few weeks. Thank you

  You have zonealarm, if if this is the problem.

• Need to copy audio files from a USB on the computer for transcription - how to sync and keep the original audio files on USB?

  Have the transcript very important things to do; usually get audio on the discs, but this time I had rec on a USB - has never worked with USB before, and I don't know how I copy the files on the USB key to an audio file in my computer through Windows Media.  Really of what I can do something wrong and erase/delete files on the USB key if I don't know what I'm doing.  I guess I "sync", but could someone please give me step by step on how it's done with Vista?  As you can summize, I'm "technically not contested."

  Thank you.

  Hi Tech Mom,

  If you copy and paste a file or folder, it does not get deleted in the source location. It gets deleted in the source location when you cut and paste the file or folder. The article below explains how to copy and paste a file or folder.

  Copy a file or folder
  http://Windows.Microsoft.com/en-us/Windows-Vista/copy-a-file-or-folder

  See question 5^th from the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Impossible to copy the control file.

  Hi everyone, I am trying to clone my database and get this error when you try to copy the control file.  I apologize if it's very beginner to here but I'm really stuck and need a hand!  Thank you.

  SQL > @D:\oracle\product\test\cloneinfo\test_ctl.sql

  ORA-01081: cannot start already running ORACLE - he stop first

  CREATE CONTROLFILE SET DATABASE "mediated" RESETLOGS ARCHIVELOG

  *

  ERROR on line 1:

  ORA-01503: CREATE CONTROLFILE failed

  ORA-00200: control file could not be created

  ORA-00202: control file: ' D:\ORACLE\PRODUCT\ORADATA\TEST\TEST_CONTROL01. CTL'

  ORA-27038: created file already exists

  OSD-04010: < create > option specified, the file already exists

  START: RECNO: = SYS. DBMS_BACKUP_RESTORE. SETCONFIG ("CONTROLFILE AUTOBACKUP', 'ON'")

  ; END;

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_BACKUP_RESTORE ', line 4400

  ORA-06512: at line 1

  ALTER DATABASE OPEN RESETLOGS

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  SQL > select name from v$ datafile

  2;

  Select name from v$ datafile

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  Each of us has started early, don't worry.

  (1) analyze the errors:

  ORA-01081: cannot start already running ORACLE - he stop first

  your database are open? Check it with--> sqlplus > select status from v$ instance;

  (2) following error:

  ORA-00202: control file: ' D:\ORACLE\PRODUCT\ORADATA\TEST\TEST_CONTROL01. CTL'

  ORA-27038: created file already exists

  OSD-04010: option specified, file already exists

  Explain to: https://forums.oracle.com/message/9629124

  (3) to create controlfile your database should be in status "Nomount". So:

  SQL > shutdown immediate;

  SQL > startup nomount;

  4) more info on: CREATE CONTROLFILE

  If you have more problems, let us know.

• How to copy a file from the client to the DB using WebUtil machine.

  We convert our forms 10g R1 forms 11g (Forms [64-Bit] Version 11.1.2.0.0).
  
  Or 10g R1 forms that we use a bean called oracle.forms.demos.uploadclient.FileUploader to download files from our machines of client DB machine and sometimes the application server. Select the file (using the open dialog box file which is also part of FileUploader) and then give the directory of destination (from DB machine) using the IP address.
  
  Problem is this bean File Upload does not work in forms 11g. So we need to use WebUtil.
  
  Problem is, WebUtil has only a utility to copy the files to the client computer on machine App Server (Client_To_AS). Documentation, says 'download target directory.
  must be in the transfer.appsrv.write list. Can we put any directory beginning with an IP address in the present name and use this Client_to_AS function to copy files from client to DB machine?
  
  Or if not how transfer us files from the client computer to any machine in the network form 11 g?
  
  Published by: user12240205 on June 8, 2012 03:58

  Probably, if the upload form, it is important that a "commit" be properly executed. It was actually a problem we have seen with the demo of original webutil too, which has now been fixed. We were not making a commit and so, data were only available in the session as a result of the post, but not available outside the current session of forms.

• "Impossible to copy the name of the file: access is denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »

  I move the data because a Trojan horse snuck in.  I killed the Trojan horse by setting the drive as external and scanning.  However, I could no longer connect to the formerly infected drive. It hangs at the Welcome screen.  So I load XP Pro on another drive and set the old drive as external. I now see data, but get the "Access denied" message that will let me copy the data.

  Or I have to be able to release the data to the new drive or access the old disk by booting to XP.  Now I can't do either.

  I tried to get XP on the old drive, but the Trojan horse seems to have changed the password admin. I then tried to erase the password using a Linux boot disk and it showed the account unlocked, but I always block to the Welcome screen.

  Ideas appreciated.  I can't move forward until I can get the data off. THX K.

  Karen Girrl
  Thanks for posting with us.  The article below describes taking possession of folders\files.  You may need to go through these steps, if malicious software has modified the permissions on your old drive.
  http://support.Microsoft.com/kb/308421

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• Impossible to copy multimedia files on Stor.e tv + using LAN

  If I try to copy files from my PC to my TV Stor.e film + using the network fails. Any ideas?

  I can see the Video folder and open it.
  I dropped a simple audio file on it and copies, but as soon as I try to make a video file, it is sitting there trying and it fails.

  I get a msg saying to try again or cancel.
  I click Cancel and it takes about 2-5 minutes for windows to react and stop.

  I am running Win 7 Pro.
  I have 8 GB of RAM and using a wired network.

  What Miss me?

  > I dropped a simple audio file on it and copies, but as soon as I try to make a video file, it is sitting there trying and it fails

  This means that the small files can be copied correctly and you are not able to copy large (movies) on the HARD drive?
  Is this good?

  Have you tried to copy the data using the USB port?
  Check it! It would be interesting to know if this happens only by using the LAN connection!

• I'm trying to copy picture files from C: to D: readers. How can I do

  I need more space on my C: drive and you want to copy the image files on the D: drive and remove them from the C: drive.  I can't find a solution on how to do it.  BACK was easy, but there seems to be no program for that.

  Two ways:

  • Open a Windows Explorer window and navigate to the directory that contains the image files
  • Open a second Windows Explorer window and navigate to the drive D:\ (or to a new folder that you create on D: using file > New > folder).
  • Drag and drop in the 2nd window.  See http://windows.microsoft.com/en-US/windows-vista/Moving-and-copying-files-by-using-the-drag-and-drop-method you can do this one at a time or select multiple files using the CTRL or SHIFT key.  If you use the right instead of the left mouse button while you drag, you'll get a menu that allows you to choose whether you want to MOVE or COPY (best practice is to COPY then DELETE after that you don't know the copy did what you wanted;) MOVE automatically deletes the source files after their copy to the destination).

  Or

  • Open a Windows Explorer window and navigate to the directory that contains the image files.
  • If the left pane of the window does not display a list of common tasks, make sure that the button 'search', or the 'Files' button in the explore toolbar is selected.
  • Select the files to copy/move, using CTRL or SHIFT as you wish
  • Under "file and folder tasks", click on "copy this file.
  • Navigate to the destination folder, and click "copy."

• Impossible to copy and paste from/to XP using remote desktop

  Due to problems, I have recently reinstalled Vista on my pc.  Before the reinstall, I could access my PC using XP, using remote desktop from work to distance and copy and paste the files from XP and Vista.

  Since the reinstallation, I'm not able to copy/paste unless I have turn off UAC.  (I have progbably had turned off before, but he didn't.)  Is there a way to copy and paste them to work without disabling UAC?  Maybe some changes in the policy or registry?

  Note: I use Remote Desktop with Clipboard selected for local devices and resources.

  TIA.

  Janis

  I saw this thread earlier and it does not apply.  I would say the copy/paste of text works.  I can't copy and paste a file.  UAC seems to be the key here.

  I found a work around.   I connect with a local drive.  Since the remote desktop, I can copy files to the local disk, which then I have the file available locally and I can go other directions.  It's a little slow, but it works for now.

• How can I copy image files from my computer to a flash drive

  I copied all my photos in the photo library & am now trying to copy the files from photo to flash player... never did before transfer... How can I do this

  Photo Gallery is just an 'intermediate '. It does NOT store images/photos.
  Images/photos are stored in the folder. Are your looking for in the pictures folder.

  Plug your USB > start > computer > click the flash drive > open folder images > drag and dropn photos images in the flash player.
  That's all.

• Impossible to copy the old Mac VM (Fusion 2.0.6 running leopard) again Mac (SL running Fusion 3.1.2)

  Just got a new MBP with SL, I upgraded to Fusion 3 and tried to migrate my Windows xp VM on my old MBP at this news.

  Here's what I did:

  (1) stop the virtual machine from windows.

  (2) copy the package of VMware, IE. all under the/Document/Virtual Machines / to the same location of the new MBP

  (3) launching the Fusion 3 on the new MBP

  (4) choose "open an existing virtual machine.

  (5) windows XP VM will appear in the Menu.

  (6) it starts to 'load' but then he says "the virtual machine appears to be in use", and there a yellow warning icon.

  I don't know what is the cause. I already have stop my VM before I copied this on. That is to say. He is not in a paused state.

  I suspect that there may be some impure lock sitting somewhere in those files, tagging, wrongly, that it is used...

  Any help is appreciated. Right now, it seems that I have to continue to use the old MBP/Vmware

  Try looking at the beam (right click on-> show the contents of the package) for folders .lck. If present try to delete.

  If present try to also delete the file .vmss .

• Copy some files from one user to another

  Hello!
  
  How can I copy (not share) some files from one user to another?
  
  The reason for this is because we rename users to other allocation model.
  
  Thank you!

  You must share the folders you want to transfer the ownership of the new username, or one responsibility that the new user has (I guess that's an Oracle Applications EUL). The user connects to Discoverer more with their new name. They open the workbook (s) and then do a SAVE AS. Who will save the workbook with them as the new owner. You must then sign with the old name of the owner and to delete these old files (after the first backup them) once you are sure that everything works fine. Yes, it is a nasty process. What we do is we use a "dummy" username when we create/modify the workbooks. In this way the fictional user name is the owner of the workbooks. So, it does not matter if a person leaves or if you change the user naming conventions. If you have many users to create cabinets, then a dummy user name doesn't quite work. You could always submit an enhancement request to Oracle for a copy function. I hope that you will get a lot of customers to support such a request.
  John Dickey