G50 70 swap HDD SSD

Similar Questions

• swap HDD with ssd

  I have laptop ACER Aspire E1-510-35204G50Mnkk, and I would like to change my drive ssd Kingston SSDNow V300 2.5 "60GB 7mm, please could you tell me if this is possible, and my laptop does support this and that my motherboard? I do some tuning changes after except cloning a hard drive SSD?

  Many thanks in advance

  To upgrade your hard drive for an SSD, you must get an SSD that is the same format as the HARD drive.  Looking for a standard 2.5-inch SSD.  So that SSDS might work, however, you have read above, I would say something a little bigger.

  This SSD as it is a pretty good, and it is now on sale for $105: http://www.amazon.com/Samsung-2-5-Inch-Internal-MZ-75E250B-AM/dp/B00OAJ412U?tag=slicinc-20&ascsubtag...

  This is a video showing you how to enter and edit on: https://www.youtube.com/watch?v=YLQR1p1l9cU

  Regarding the migration of your OS on the SSD, this site will give you some tips: http://www.ultrabookreview.com/6023-how-to-replace-hdd-ssd/

  Let me know if you have any other questions. =)

• Satellite U940-100 - replace the HDD SSD

  Hello

  I want to change my Sat U940-100 by a SSD HARD drive.
  I can make a perfect copy but when I change the HDD SSD won't.
  Can someone explain me what I have to do?

  I think it has to do with het SSD of 32 GB, which is already inside?
  What I have to change something in the BIOS?

  Thanks in advance

  Dag

  What do you mean it won't? What did you do exactly?

  In my opinion after Exchange of HDD with SSD, you must install the original recovery image and start using your laptop with the 'settings '.

• Re: Satellite U500-1 DR-error on Toshiba HDD/SSD Alert

  Dear,

  I get the below error on Toshiba HDD/SSD Alert:

  "Unable to get the information from the disk, cannot use the alert function.

  I uninstalled and reinstalled Toshiba HDD/SSD Alert, but nothing has changed.
  My laptop is satellie U500-1 DR and the operating system is windows 7 (64-bit)

  Thanks in advance

  To be honest this message is not to me clear that the same tool works on my machine.

  Try to reinstall the Toshiba Value added package.

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• HDD/SSD location second free Qosmio X 70 - B?

  I want to buy a new laptop series Qosmio X 70 - B.
  but I have a question about the equipment of the Qosmio laptop...
  Namely,

  It is a second free (EMPTY) 2.5 inch HDD/SSD slot inside the laptop to assemble the second HARD drive?

  X 70 series - Had second free HARD drive location... but this new thinner than a series B series... I think that this series B may not...

  I think that the Qosmio X 70 - B is peripheral different.
  Its similar to Satellite L70 - B or Satellite S70 - B series and my knowledge the second HDD slot isn't taken in charge.

• Qosmio X 770 - 13F - can I built it second internal HDD/SSD?

  Hello from the snowy mountains of Savoie!

  My computer is a Qosmio X 770 - 13F.

  I am disappointed because it runs very slowly (I have the 'windows 7 explore bar green problem'...)
  I expanded the 8 GB RAM: no change to the actual speed.

  In this computer, there is only one hard drive (750 GB, 5400 RPM).
  The evaluation of access disk hard windows is only 5.9!

  There is an empty place next to the hard drive, so I wonder if it is possible or not to add a second internal hard drive or even an SSD.

  I searched for this user manual: no answer!
  And on the web, I have also not found response.
  Perhaps on this forum?

  Thank you and I apologize for my 'English amateur' (I'm french!)
  Jerome.

  In General, it is not easy to discuss the performance of the laptop. All of us use notebook with a specific setup and preinstalled applications that can run in the background and slowing down the reaction of notebooks.

  All I can say is that you must check the OS configuration and disable some unnecessary applications to start with Windows. Also disable the Windows automatic update installation. This can also slow down cell phone operations.

  HDD/SSD
  I n t have this laptop Qosmio but it will be interesting to follow: when you remove the cover and check empty place is available HDD/SSD connector or not?

• Re: Qosmio X 300 - 11W - HDD/SSD Alert driver problem

  I'm trying to install the driver HDD/SSD Alert and get message 'unsupported machine.

  Hello

  Can you please tell us what OS you are using?
  Have you installed all other Toshiba tools and utilities?

• Portege R700: HDD/SSD Alert "cannot get disk information.

  The Toshiba HDD/SSD Alert keeps popping up on my Portege R700. It gives the message "failed to get disk information, cannot use the alert function.

  The OS is Windows 7 32 bit. Everything else works well.

  I tried uninstalling and reinstalling the HDD/SSD Alert cmdlet and the Intel Rapid Storage driver, but none of the measures have worked.

  Someone at - it ideas?

  Thank you

  Try this:

  Remove the application HDD/SSD Alert Control Panel-> programs and features
  Remove the Toshiba Value added Package Panel-> programs and features application
  Reset
  Download and install the latest Package of added value on the Toshiba site
  Download and install the latest HDD/SSD Alert on the Toshiba site

  Otherwise, it would be possible that the problem is related to the HARD drive maybe that alert the program HARD drive cannot read the info of the disk due to HARD drive hardware problem.

• TOSHIBA HDD/SSD Alert - do I need if I have my laptop on a desk?

  Hello all, I guess my question is not on the HARD drive or the hardware itself, its subject the load or the process CPU usage alert hdd in my laptop. Fact it gives a heavy load for my memory?
  Someone at - he noticed your laptop to be a bit slower when this option is enabled?
  I know it's protection for my HARD drive, I understand that was a time when my laptop falls or is hit, the hard disk will fail and my HDD is damaged.
  But how useful this app if I have my laptop on a desk all the time without danger?

  Do you advise me to turn it off?

  In general the TOSHIBA HDD/SSD Alert function must monitor the operating status of HARD drive and run the backup of the system. It is very useful, but certainly not so important, tool that must run all the time. It runs in the background, does not use the resources so and in fact there is no reason to stop it, only if you want.

  That recommend you?
  In my opinion you should let it run. I have the Satellite P500 and it works all the time. I t n t n stop and I noticed a few performance bad/slow more laptop because of this.

• replace the HDD SSD

  Dear Sir.

  I want to know how I can replace my HDD SSD

  I have MacBook Pro mid 2012 500 GB I want to change my HARD drive 500 GB

  Can you please guide?

  Kind regards

  Saqib Sallahuddin

  Click here for more information.

  (139267)

• Satellite L655D-011-HDD/SSD Alert, HARD drive failure?

  I have an old L655D-011 of 6 months and yesterday it started to appear with the message to back up my files because there is a problem with my HARD drive. Well, after having a technical support in the past, I don't give that easily and simply run my laptop to the nearest authorized service center. Instead, I help out.

  I did the BIOS update finally. No change in question.
  Finally had time to create a recovery media. No problem with that at all.
  I reformatted. No change in question.
  Checked the health monitor. It shows that my HARD drive is "good". Yet, when I double-click the icon, I get a pop - up with the following message:

  "Toshiba HDD/SSD Alert."

  Disk0

  Your HARD drive is SMART failure to predict which monitors the status of operation of the HARD drive. Your HARD drive is facing a problem and CHIP controlling the software predicts that the HARD drive will fail. Toshiba strongly recommends that you create a back-up to the date of your HARD drive. Contact an authorized service provider to check your drive and buy a new replacement if necessary. »

  So, after that I decided to run a CHKDSK /f /r. Result: 'windows replaced bad clusters in file name \hiberfil.sys 44990.'

  I should be good to go, right? N ° same problem with the precaution of backing up my files.

  But this isn't good, is it? If my HARD drive is about to fail why monitor health show that everything is "good"? There is no problem with gel, pxe.boot errors, rattling disc, unusual vibrations or read/write failures.

  So, my questions (after all the above and see other threads to ask questions about HARD drive failure messages) are: were there any known issues where the SMART software does not work correctly? Are failure drives hard all from the same manufacturer (I've seen this happen - get a bad batch of a single manufacturer HARD drive)? The health monitor working correctly?

  In my opinion your questions cannot be answered simply.
  > Are there any known issues where the SMART software does not work correctly?
  How many people must confirm that they have the same problem? I guess this happens from time to time, but you cannot say that this problem is known.
  You will always find people who noticed the same issue and not on Toshiba forum only, but on all the forums where people discuss cell phones in general.
  > Is the disk failure hard all from the same manufacturer (I've seen this happen - get a bad batch of a single manufacturer HARD drive)?
  How to check or confirm this?

  You know, during the first backup all your important data, watch carefully what happens the next few days. If the info appears again and again, contact the nearest service Toshiba and let them Exchange the HARD drive.
  The guarantee is valid and it will be free of charge.

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• Upgrade HDD SSD

  Hello

  I have Acer Aspire M5 - 583P - 9688 Lpatop and I want to upgrade my HDD SSD t. Could you please tell me what type of SSD I will buy and is there a link for the installation of the new HARD drive.

  Also how I will keep the copy of my windows once I upgraded my hard drive.

  Thank you

  Hello

  1. You can install these SSDS:
     Crucial
     A - Data
     Samsung
  2. Installation:

• XPS 8700 swapping HDD to SSD

  Just received new XPS 8700 and swap wanted immediately to the factory installed 1 TB of HDD to a new Samsung 256 GB SSD. Given that Dell did not provide a Windows backup a DVD, I removed the HARD drive and tried to clone for SSD by using another computer running Windows 8. However, neither software Samsung SSD or EASEUS Todo Backup Free would allow me to clone the whole HARD disk, the SSD is smaller.

  EASEUS has the possibility of reducing a selected partition so I could try to clone only the system partition main which is 940 GB but contains only 40 GB of data, mainly from windows and other software drivers, but I'm afraid that if I clone the other partitions, including the recovery of those, I will not be able to restore the system in the future.

  Technician Dell told me to use an OEM Windows 8 drive for a clean install on the SSD, but I did not and fear may lose everything that Dell has installed on the HARD drive.

  Should I continue the cloning attempts to use other software that allows to shrink the partitions if they contain no data - which one? Or XPS from the startup HARD drive as it is, make a record of system backup/image then, restore it to the SSD?

  Help will be very appreciated!

  The Dell recovery partition can be easily removed without rendering the system unbootable, so my suggestion would be to leave them alone.

• Swap HDD PSAAQE Equium A100 - 01 M - would be Crucial M4 work SATA III SSD 64 GB?

  I have a friend in a bit of a State with their incredibly slow laptop; I have a spare old M4 of Crucial 64GB SATA and a couple of hours free in the morning. I said I would try to help and my plan is to swap the drives.

  I see from the [Manual | http://www.toshiba.co.uk/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fuserman-en-20090212142351.zip] that there is a recovery partition.

  I have one of these USB to SATA led and I really was hoping if someone could let me know something that Googling it has not revealed so far that is:

  1: what SATA is this laptop? Is it 1 or 2? This player works on it?
  2: what is the best method to copy the current structure of disk and partition? Preferably leaving the data not copied partition as this will be a full recovery.

  Is that all I need to know?
  Sorry if this IS answered elsewhere, but I have 2 hours to do, I do it for free, and I just googled this morning already.

  Thank you!

  Hello

  > 1: what SATA is this laptop? Is it 1 or 2?

  As much as I know the satellite and the Satellite A100 supports SATA I controller.
  The two series are the same.

  > This disc will work on it?
  Well, since the SATA standard is backward compatible, the SSD should work but with lower performance.

  > 2: what is the best method to copy the current structure of disk and partition?
  There are different options. You can use the Toshiba Recovery disk to reinstall the system on the SSD drive. Personal data (documents, pictures, mp3, etc.) could be copied to a USB flash to move disk of the SDS.

  You can also create an image of your partitions and after installing the SSD drive, you can use the image file to recover partitions

  In some cases, manufacturers of SSDS provides tools/software specific to a product such procedure too.