G7-2235dx - memory Slot defective/made not climb in memory Slot

Similar Questions

• Re: Qosmio F20: the tuner is defective or not installed

  Hello

  I recently bought a second hand F20. As I was getting to know the new machine, I opened the center of media and noticed it was strange he mentioned nothing about the TV. I went into settings, clicked on TV and received the following message: "the tuner is defective or not installed.

  Please make sure that the tuner hardware and a valid tuner hardware driver are installed.

  I decided to try to update the driver, but to know how to use, the tv tuner does not yet appear in Device Manager.

  Any suggestions on how to make it work?

  Hello

  Laptop Toshiba computers are equipped with different hardware specifications.
  The Qosmio F20 series also supports different hardware specifications.
  This means that some F20 supports the TV tuner and some don t!

  Maybe your laptop was not equipped TV tuner.

  By the way; This Qosmio F20 - xxx you have exactly?

• Someone got on my Facebook page and comments made (not), I would like to know how they did it and if I can find out who it is who did it.

  Comments were not in normal conditions example: like - share, etc.  It was posted above my entry. How to achieve this and knows who did.  Any help will be greatly appreicated.  Thank you

  Hello

  Check with Facebook help and Support and their Forums.

  Facebook - help and Support
  http://www.Facebook.com/help.php

  Facebook - Facebook Contact and support of Facebook
  http://www.Facebook.com/help/?page=835

  Facebook - Forums
  http://getsatisfaction.com/Facebook

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do the default editing a selection list after a change in another list of selection is made (not in cascade LOV).

  Hello

  I searched for the answer for a while now, but could not find a solution to my problem. It's a rather trivial issue, but after dealing with more urgent problems, I stuck with it and I can't move forward I use Apex 4.2.1

  OK, lets start with a description.

  I have two selection lists. After making a choice in the first, I would like to than the second value to change. It is not cascade LOV case, however, at least I don't.

  Let me give you an example. Suppose we have a table with name and default to the occupation.

  Name	By default occupancy
  John	Doctor
  Mark	Firefighter
  George	Firefighter
  Tom	Concierge

  End user first selects the name in the first list, then the occupation of another. It's perhaps not clearly in the example given, but the order of the questions.

  What I want is to force a change in the second value in the list after a choice in the first. So after the name is chosen, the occupation should switch to the default.

  The assignment is the most typical, but not the only one. So I want the end user to be able to change the occupation if necessary. Tom of sense is not to be janiotor, it can be whoever he wants this is why it is not cascade LOV problem.

  I tried with dynamic action - definition of value and then refresh. It works when the second selection list is the text field. I can't find a way to make it work with another selection list.

  Hope you can help.

  Concerning

  AEMs salvation,

  What I wanted with display and return value, you usually have a list of selection like this query:

  SELECT occupation d, occp_id r

  OF professions

  If your return value is an identifier. To use the text as return value is rather rare. Where my question, because obviously you must select the return value in your query, NOT the display value.

  So let me explain what is a set value. It takes the value of the server by using your query and AJAX in the background, then uses Javascript to set the value of the item in the browser.

  At this point your selection list still has the OLD value in the session. Then, you do a refresh and the element uses the old value, and it seems that nothing happens.

  So solution:

  -clear default values, you don't need those

  -get rid of refresh it in your DA

  Kind regards

  Joni

• Made not reflecting is not activity timeline

  When Preview us the animation in our legacy timeline, playback of the animation as we wanted to. However, when we make it, suddenly the graph we animation seems to lose it of average and the fall of the screen.

  Why not make it reflects what we framed animation to do key? And that we see in the timeline when we Ram preview?

  Here is a proposal: when you preview, not looking at the Active camera... that is the ONLY way AE will make.  And no, you can't turn your custom in an Active camera... view must make one.

• Shadow copy service defective or not running

  Windows Update has been trying for days (default) install downloaded updates. It turns out that the problem is failure to create due to the vss error restore point. tried manually from the service with the results of epic fail. y at - it a patch or mini install which could solve this problem or should I reinstall W7 everywhere?

  Hi Gieto,

  1. What is the error message when you try to start the service and the windows update error?

  2. did you of recent changes on the computer?

  Method 1

  Disable the security software on the computer and try to install the updates and try to start the VSS service.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 2

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Red reading 5 k works not made not even at a resolution of 1/16 and with preview

  Hello

  I'm on PC workstation to date first cc:

  Two-processor intel Xeon 1.8GHtz each

  32 GB of Ram

  NVIDIA Quodro K2000

  GPU acceleration enabled

  My support is R3D 5120 x 2700

  Timeline is the same.

  I don't get any reading even at a resolution of 1/16 and with preview rendering. I can rub through the images at high speed using the mouse on the read head but crashes right when I hit the game. Ditto for the Source and program monitors.

  Thank you

  Josh

  Scratch that question. I was mucking with pilots earlier and he just needed a reboot. Now works at 1/4.

• to change my earpiece and charger with the new, but they are not defective can I use guarantee of my iPhone to exchange them then?

  I bought my iPhone almost a year ago and he still has warranty valid

  If I want to get new headphones and charger but they are not otherwise defective

  so is it possible that I get new ones even if they are not defective?

  N ° guarantee replaces the defective do not part to which you have become dissatisfied.

• Satellite L50 do not identify the second module of RAM

  Hello

  I can't add a Kingston 4 GB ram in my L50 - A - 1 DG computer because the computer does not illuminate after I added a memory module (all other brands like Kingston), I want to know if the computer works only with the original memory module, I should buy an another (the original memory mark) Hynix to add my memory please?

  Thank you very much

  > the computer turns not after I added a memory module

  The laptop can be upgraded to 16 GB because only two memory slots are available.
  32GB are possible only for computers and motherboards with four memory banks

  The laptop does not start because your extra RAM module is defective or not fully compatible. Please also check if the module is properly connected.

  Compatible modules are already mentioned by Timox and you must use the DDR3L 1600 MHz (PC3-12800) SO-DIMM module

• Designjet Z6100: Z6100 - all defective cartridges

  Hi all

  This call began as does not - I got a power supply along and had to replace it.

  As the complete printer initialization of the façade revealed that all inks X'ed out.

  All diagnoses of electronic Module past right until he asked if all inks are installed in the correct position. Press OK and you get a 13.0:10 error. (this error is not in the manual).

  When I check the info of the ink cartridge, they are all dated 1969-12-31?

  I contact HP technical support and cross it with the technology, and he suggested command and installation of a cable ink Tube/skitters and APS.

  I ordered and installed parts as suggested and before finishing initialization, the printer asks to insert the ink cartridges for ink system installation (I assume so that the tubes can be purged). When the inks are installed all the defective flash (not X this time, just all of the flaws). I contact HP and they have revive me several diagnoses and they want an EWS print info. For some reason I can't access. The Tech asked me to do a reset EEROM, which I wonder that we will lose all the data that might help. Reset of the EEROM made. I send along the EWS now which is a no data except that inks show dates 1969-12-31.

  After several discussions and emails with HP Technical Support we will now replace the PCA Printmech.

  I really hope this solves the problem. If I ask the following:

  Whay do we not come to this conclusion earlier and would it not have been a possible solution before replacing the tubes and the APS?

  Thanks for listening. Any thoughts on this woukd be appreciated.

  See you soon,.

  Roy

  UPDATE:

  Replacing the Printmech PCA has solved this problem.

  See you soon,.

  Roy Kuzmich

• Envy DV7 HP: HP DV7 Envy your PC need to be repaired a required device is not connected

  I have 10 Windows on my HP DV7 envy.  When I turn it on I get the error "Your PC need to be repaired a necessary device is not connected."

  None of the keys work, which means I can't select startup options or select System Restore.  It just brings back me to the blue screen with the error message. So I can not try all options, I found on the internet that are made not boot master book or disable secure boot record.

  I ran the tests of memory and fast disk, as someone else suggested that memory may be bad.

  (HP please don't answer back Windows 10 is not supported.)  Microsoft has given to all customers of Windows 8. Besides it is not at all compared to the question, since the system cannot not even load the operating system.)

  I fixed that basically like this:

  1. safe mode in the bios
  2. change the boot order to put USB in the front
  3. Install Ubuntu from USB, so erase Windows

  I got stuck because I had copied the Ubuntu ISO was not a complete file.

  No doubt I could able recover if I asked HP ship me a replacement disc for Windows 8.1

  Also, I learned that you press f8, f9, f10 or f11 when you turn on the computer.  You must wait until the screen goes to sleep again and repower the computer to switch to another option.  Now key people will work until you do this.

• Optical drive slot, media with paper label

  I copy lots of CDs for my wife chorus. It appears (process of elimination) CD (with standard around the CD labels) turns properly, make a LOT of noise, can not climb, may hang on a track and will not eject, even after all the noises appropriate ejection. The last of them, I've tried finally jumps after several hours. I'm guessing that the thickness of the media is what is the cause.

  CD printed surface seems to work well, and the ones I burn very good ejection. I print my labels directly on printable CD I have (thanks to my brother InkJet) burn and they load, burn and eject fine.

  My primary iMac is a late 2009 / early 2010. Now, I took the drive incriminated upstairs for my G5 iMac ancient network. The paper CD went in fine, carefully read and ejected very well. So, I just left it up there and accessed through sharing. But it is a workaround.

  Apple suggested replacing the optical drive, but I wonder if my theory 'too-thick' is logical and I need a new (as long as I keep the G5). In fact, a new may present the same problems, right?

  Does make sense?

  Hey Harris,.

  Yes, that makes sense. Because the SuperDrive is a specific thickness, you will encounter issues with the drive being accepted or ejection of him as well. Take a look at the general troubleshooting for the slot loading SuperDrive for this response and a few additional questions you may have.

  Get help with the SuperDrive slot on your Mac computer loading
  https://support.Apple.com/en-us/HT201788

  Take it easy

• Not found Boot on HP Pavilion 11-h013dx x 2 pc device

  I have a HP Pavilion 11-h013dx x 2 pc windows 8 and this weekend my computer suddenly switched off. When I restarted I got a blue screen which gave me the opportunity to restore and refresh. I tried both options, but the computer stops when that 15 percent of the restoration. Then when I turned on the computer it gives me a black screen saying device not found Boot. I hit F10, enter, F9, then you leave and saved, who did nothing. I ran to check the hard drive going on. I ran to the verification of memory and which failed with code RQDATS-6T079C-MFPWWK-002103. I can't remember what other screen I was when I got a different error code, but this came as well at some point and I wrote in RQDATS-6T079B-MFPWWK - 001 H 03. All other positions, I read in the support forums that looks like it is a hard drive error and probably needs to be replaced. My free customer service ran back in March, but the computer is still under warranty until December. Can someone help me with the next best steps I have to take? Thanks in advance!

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Please Contact HP if your HP laptop is under warranty, HP would replace the memory Module

  According to the message that you have posted, it shows that you have found the alphanumeric error code numbers 24 'RQDATS-6T079C-MFPWWK-002103. If you get 24 characters alphanumeric ID failed, then it is time to replace the memory Module with a new

  Note: If you have 2 sticks of memory on your laptop, please test one at a time to check whether the two memory Modules

  are defective or not

  I highly recommend the assistance of HP immediately by phone to get help without delay to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can check your warranty here to check the status and click here to order a new hard drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• HP Pavilion dv5z-1200 will not start, flashing LEDs

  LEDs keep blinking once every 4-5 seconds, computer does not start even in the BIOS.  Out of warranty.  The table shows the CPU is not functional.  After the hard reset several times, after the failure of the CMOS, I reinstalled the memory modules, nothing helps.  I opened the darn thing, reinstall the CPU, cleaned the existing thermal paste and replaced with a high thermal conductivity, one and clean thermal gel pads ugly that supposedly provide a cooling the GPU.  All this for nothing.

  Should I assume by now that the CPU is fried, or is there a chance to distance the BIOS EPROM chip is toast and cause all this?  Someone has experience in this sense, is the flashing model good to locate the faulty component?  All ready to offer their advice Jan 11-12 HP Expert?  I replaced a BIOS chip in an another HP Pavilion of last spring, so it wouldn't be a problem.  Don't want to invest all efforts - and paste - for nothing.

  In any case, this is / was my last HP laptop ever.  Between a ze4547 and this dv5z, I got so of many hardware problems, I prefer to buy netbooks cheap every two years than spend a zillion things expensive, shiny, flashy with abject genius inside.

  Thanks in advance to anyone!

  Taking up this issue and reported a permanent fix (i.e., more than 5 months).  Yet once, the defect could not solder in the graphics chip ATI Radeon (Northbridge).

  Chip HP ships this with a simple gel pad main Board between the radiator and the graphics, which after > 1 year of running hot develops inclusions of air and turns of conductor of heat a heat insulator.  Due to the high temperature resistance, brazing under the chip will slowly oxidize anr / or crystallize and develop cracks and inclusions of oxide.  The only solution in addition to buying a new card of mother is reinvest with a heat gun, or using a special station of redistribution and the improvement of heat transfer to the heatsink.

  Here's what the complete repair consists of:

  -Disassemble the laptop according to the instructions in the maintenance manual; Make sure that keep track of where each screw came from

  -Remove the heat sink fan and clean the end inside of the metal fins (simply by blowing canned air will not work)

  -cut a ~ 1 mm of thickness copper thick to the exact dimensions of the cushion gel covering the ATI Radeon chip and ensure its two surfaces are clear of any oxide

  -Clean the CPU and the Radeon perfectly cooling surfaces using 92% isopropyl alcohol; in a similar way to wipe the corresponding surfaces of the shiny heatsink

  -dissolve welding flow or Rosin in a few mL of 92% + isopropanol

  -pour a few drops of this solution of rosin under the chip Radeon on all 4 sides; Rosin ensures that reinvest the chip will recreate connections free of oxide with the main card; use a pipette or a pair of tweezers for this and not to spill the solution outside the area of interest

  -make a mask cardboard lined with aluminum for the entire main Board having a place of opening in the Center exactly as big as the Radeon chip; Make sure that the coating of aluminum foil extends to the lower part of the mask through the operning square to protect the card against high temperatures. use this youtube video as a guide (minute 06:50)

  -heat gun to regular heat on 'Medium' (or 'Low' if only two power settings); taking the mask in place immediately on top of the Radeon chip using a tool metal long (so you do not burn your fingers), slowly heat by lowering the gun hot air for the duration of a minute

  -maintain the hot graphics chip for about 30 seconds into the air gun hot about 1-2 inches above the chip. Make sure that the mask with double foil is aligned with the chip to avoid burning its below or other components of the motherboard; consider wearing a thermal glove or leather on the hand that holds the mask down with this tool metal long

  -slowly raise the heat gun on the time of ~ 30 seconds and then remove the mask and let the chip and the main map to cool for about 1-2 minutes

  -It is best to test repair before reassembly of the computer; to do this, connect the power button, display, cooling fan, a single chip of RAM and a charged battery to the main card and turn on the laptop the bone bare; See the HP logo on the screen for a success to reinvest

  -use of money from high-quality thermal compound (for example, Arctic Silver 5) and coat the surfaces of cooling of the CPU and Radeon chip, as well as the corresponding surfaces on the heatsink of heat and the puck in copper, with one layer, thin and uniform; Wipe all spilled; Place the wedge of copper on the graphics chip and carefully assemble the heat sink; don't forget to plug the fan on the main card

  -Finally, back up the phone by following the steps for disassembly in reverse order; do not mix the screws, like using a long screw where it was not may cause a short circuit or cracks in the main map

  -Use of SpeedFan to monitor the performance of you cooling system in the processor; periodically blow out or spend vacuuming of dust between the cooling fins.

  Good luck to lovers!

• battery use is poor, cannot get 9 hours music (medium) 4 hours video and 2 hours internet radio before charging. It is defective, because it's new, or is it normal for an ipod touch 6th generation? I think sending him again.

  Hi, I recently bought an apple ipod touch 6th generation, but the battery seems to be not as advertised.

  I can't get 9 hours of music at a medium volume, 4 hours of video with youtube and internet radio is 1 to 2 hours at best.

  My ipod is defective or not as advertised with autonomy. It is better to send return as defective or all contacts in like this apple ipod.

  Not impressed by the autonomy at all.

  All advice welcome thanks.

  You can make an appointment at your local apple store or service provider authorized and have them checked.

  I know it's not perfect, but they sell so external batteries, you can connect your device to. Plus, they are very affordable.

  I have a 6th gen iPod and I find myself recharged every day and sometimes two times a day. I don't listen to music top but do play a game and sometimes to check email so I don't think that your experiences are offline with my experience anyway