NB100 screen will Dim - backlight not working not

Similar Questions

• Satellite A500-1GH - sometimes the screen will Dim

  Well, I bought this computer 3 weeks back, and since then, I have a problem with the display. A few times, the screen will Dim and after that, a message appears saying that the pilot crashed and recovered successfully.
  Any ideas that I can do to fix this problem?

  Either way, I'm using Windows 7 Edition home premium and a graficcard of 330M from nVidia. I tried to search the drivers reinstall, but has not found for this specific model.

  Hello

  have you read this thread?

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53941&TSTART=0

• Screen is dimmed when not in service

  Hello

  I don't know if it can be changed, but it is possible to cancel the gradual of the brightness of the screen dimming when I'm not in touch with her?

  In other words: when I touch the screen it's brilliant, a few seconds later, instead of going instantly dark in one phase, TI DIMM gradually until it reaches a certain level of darkness. Then, on toched, is not instantly light once again, but once again, lightned in phases up to what indicates the maximum intensity.

  I have the brightness auto on, I don't know if it has anything to do with it.

  Thank you!

  What happens if you disable the auto brightness?  But I think it's normal, after being idle, the screen will gradually dim and turn off.

• Use all displays full-screen will only clone, not extend

  I upgraded Tech Preview in July when asked last week.  Before the update, I had two working in two different Windows 7 computers virtual screens.  Since the update, view, use all displays full-screen will only clone, extend to the screen.

  It happened when I originally installed the Tech Preview as well.  In this case, I managed to toggle putting forwards and backwards and it started working.

  When I look to the customization of the display under windows it only shows a monitor and it does not find another when I click on "Detect".  I am able to use views independently under MacOSX.

  It is the Lion of mountain, MacPro, Late Model 2009 22 GB of memory.

  What should do?

  Thank you

  Dale

  Ah ok.  You use the value of the experience of the user as an indicator of video driver problems.  Also, when you suggested, update the video driver you just wanted to make sure that the latest VMware tools has been installed.  Ok.

  Had already checked those things and I had used the menu VMware to reinstall the tools.  Value of my user experience was 4.7.

  In any case, it seems to have been a problem with the tools VMware install because after I followed the instructions to manually install it here: VMware KB: installing the VMware tools on a Fusion VM running Windows, making a repair, everything's fine.  My video driver also shows a date of July 2013 now.

  Thanks for your reply.  He helped.

  Dale

  Post edited by: DaleHohm

• New second screen will Dim for 2secs sometimes.

  Original monitor problems title: Dual

  I have just set up another monitor in the office. Are Dell monitors, the original is a 23 "as the news is a 22" monitor. The problem is that the screen on the new monitor will sporadically dark for 1-2 seconds at a time. Anyone know what causes this problem?

  Hi Will,

  Sorry for the late reply.

  It can occur due to lack of updates, damaged or corrupt drivers and settings on the monitors.

  I suggest to update the display drivers for computer and monitors by visiting its respective manufacturers Web sites download and install the latest drivers and check.

  What is the brand and model of the computer?

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, then, refer to the article.

  Solving the multiple monitor problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  For more information

  Work and play better with multiple monitors:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps to solve the issue. If the problem persists please contact us. We will be happy to help you.

• XPS L702x screen will dim after driver installation intel HD

  Hello

  When installing Intel HD 2000/3000 drivers latest (or even older), as soon as the computer starts normal windows (cleaning windows install 7 Home premium), the screen darkens. I can see the backlight burning, but it's just show black.

  When the Win safe mode boot, the screen works. After removing the Intel HD drivers, windows is running in normal mode with the default VGA drivers.

  Same question if I install Intel HD + Nvidia graphics drivers.

  Tried even with Windows XP (not designed for this PC). A few first boots graphics intel has worked, but then the screen distorted upward with colorboxes/lines and doesn't work even once in safe mode.

  Update of the newest BIOS's, and old drivers tested, changed HDD even.

  Or is it some conflicts between different drivers that is the cause?

  BR

  petzkin (dedicated to Dell)

  Too bad, it was caused by a faulty RAM module that left no Bios Update.

  Removed a stick and now it's perfect!

• 2011 27 inch iMac screen will Dim

  Greetings,

  For the last month, I noticed my screen goes dark suddenly on not the case. During this time he has no use of graphics heavy just reading the news or update notes. I tried to remedy the situation by making the PRAM reset to enjoy and SMC. However, I am quite surprising that a computer that has cost more than $2500,00 would not that way. I researched and found that the probable cause was the LED backlight Board, I also found that the replacement of this Board is very costly and unfair in my opinion.

  I am wrong in my analysis of the members of the LED backlight, is it a reminder for a free replacement. I am disappointed that this is happening on such a machine than iMac 2011.

  Is > iMac (27-inch): AMD Radeon 6970 M video card replacement - Apple Support program ... any help?

  

• screen will Dim when moving the mouse

  This also occurs when you use the Panel on the surface of the computer (have no idea of what would be called). Press a key wakes the computer to the top. How can I disable this behavior of the mouse?

  It is with a Macbook Pro with OS X (version before the current version)

  Not really answering my own question but to add more information. This problem occurs if I move the mouse to the bottom right of the screen.

• my screen will Dim when I plug my battery cable

  whenever I plug my battery cable into the light going darker and I like it on the lighter, I see that I do not see

  Hello
  Please write your product number (p/n), computer laptop which system are automatically to the help and the country of purchase.
  
  Resources:
  How to locate the portable computer product number (p/n)

• Tecra 8100: display suddenly will Dim

  Hello

  during normal operation of the Tecra 8100, suddenly the screen darkens. The display still works, only the backlight is dark. By pressing the small pin, which is turn off the backlight when you close the screen, light reappeares. Sometimes for hours, sometimes for a few minutes, but especially the second. A restart of the computer solves the problem for at least half an hour. What can I do?

  Thanks in advance

  Kai

  Hello

  When the screen will Dim can you get by pressing any key on the keyboard or move the mouse?

• The screen backlight not working anymore on Satellite M

  Hello

  I have a problem with my laptop screen. The backlight of the screen does not work no matter how suspect more and I switch that turns off the screen when I close my laptop is broken.

  When I press the power button and release, a fast and light the backlight flash can be noticed.
  Does anyone have a solution for this so I can fix it myself?

  Thanks in advance, Stephan

  Hello

  I wouldn't recommend trying to fix it yourself if you n t have any experience with the laptop repair and do not be angry with me, but it seems that you don t have this experience
  In this case contact a technician and explain the problem

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• Lightroom 6 does not. Splash screen will not go away. Task Mgr "not responding".

  Downloaded and installed (twice), you click ok to update the catalog LR 5 (will not find a LR 6 cat, however), but the splash screen will not go away and program will not work.  Circle of blue rotation on forever, task manager says does not.

  Signed by adobe and in return, no help.

  I downloaded and install creative cloud and Lightroom 6 works now, it seems to pick up on initial start-up... How are we suppose to know?

• I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages

  I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages.  When I click on 12 items, a screen will appear with a red install icon, I click and it askes for the serial number. It won't let me type in letters digits only. Already, I have the serial number once. How to make this work? I don't want to be a programmer!

  attach a screenshot of what appears after clicking PES 12, http://forums.adobe.com/thread/963429

• Captivate 5 - screens will not advance preview and publish

  Hello

  I just started using Captivate 5 and I'm working on courses that are on a mobile software application, so I'm capture screenshots in a small size and you want to resize the project to a larger size, if I can put other content on the slide. After the record screen captures, I went in to change... Resize the project. I leave the Aspect Ratio to maintain controlled and choose the size of 790 x 545 preset. I click on the project to keep the same size and position in the project and leave the draft Position at the Center and click Finish. When I go to see a preview of the course, most screens will be in the correct position, but some of the screens are in the upper left of the screen, while the mouse movements remain in the correct position on the blade and the previous slide shows also in the center of the screen. Very frustrating! Can someone give me some ideas? I need to create 11 of these courses, and it is a major obstacle.

  If this feature does not someone has other workaround solutions?

  Thank you

  Tracy

  Hello

  Have you installed the fix published recently? One of the issues it resolved concerns scaling. He will be pushed any time, but you can already install it.  You will find information in this announcement of the Captivate blog:

  On the next patch...

  Lilybiri