G725: No bootable image found, mobile will be stopped

Similar Questions

• Don't Please HELP: 'no bootable image found, notebook will be stop"after execution of SECURE DELETION

  Hello world

  I have a folio elitebook - 9470 m HP and today I went into the BIOS (F10), and then I went to 'Security' and and here, I performed a 'secure erase'-> 'Notebook Hard Drive' because I wanted to clean the SSD to install Windows 7 instead of pre-installed Windows 8. After a reboot, I get the error message: "can't find any bootable image, notebook will be stop.

  I tried to select the USB drive as the start number one option because I have a Windows 7 bootable Image on my USB and I even tried with Windows 8 on a bootable USB key. I can't the computer to boot from the USB - stick to install Windows. It makes me really mad because I never had problems like this, and I've installed Windows several times on several different machines...

  So if anyone could help me it would be much appreciated!

  OK, here's the solution I got from HP support:

  Go to the BIOS Setup F10, select System Setup, disable "Secure Boot", then select "Legacy", as "Startup Option. Save and restart, now you are able to boot from a bootable Usb key.

• 4540 proBook s: Please help: not found a bootable image. Laptop will be stop

  Hallo,

  I got 10 original operating system windows. I tried to install ubuntu. but during the installation I think that Mariette a mistake in the selection of the partition.

  now, I'm having a problem that says "No. Bootable OS found, notebook will be stop.

  Please help me how to recover my operating system windows again?

  is this possible or should I reinstall os?

  Most likely, delete you the Windows partition instead of the Ubuntu partition.

  Need to know (1) what OS machine accompanies and (2) what OS you want to restore.

• Folio 9470 m: Please HELP: no laptop found bootable image stops

  Hello world

  I have a folio elitebook - 9470 m HP and today I formatted diskpartitions all with command prompt (ntfs) because I wanted to clean the SSD to re install Windows 10. After a reboot, I get the error message: "can't find any bootable image, notebook will be stop.

  I tried to select the USB drive as the start number one option because I have a picture of 10 Windows bootable on my USB key. I can't the computer to boot from the USB - stick to install Windows. It makes me really mad because I never had problems like this, and I installed Windows several times on the same notebook. (But never formatait all the diskpartitions)

  So if anyone could help me it would be much appreciated!

  What you can do is to go to the Microsoft website and download the Windows ISO file

  You can either using their all-in-one utility to create a USB flash drive or choose to save the ISO file and then run Rufus to create the USB key.

  https://www.Microsoft.com/en-us/Windows/Windows-10-upgrade

  If a working method so something wrong with your original image.

• My screen of photoshop is more remains entrenched, so that when I open an image, sometimes, it will cover the tools on the left.  How can I get photoshop to open the window anchored and not mobile?

  My screen of photoshop is more remains entrenched, so that when I open an image, sometimes, it will cover the tools on the left.  How can I get Photoshop CS 6 to open the window anchored and not mobile?

  Reset your workspaces in an embedded design.

  Mylenium

• no bootable devices found

  Hi guys, I have a laptop malfunction on the no bootable devices found. I use acer 3810 t sucks. It was working just fine last night, but it is a malfunction of this morning.

  Looks like you have verified that the hard drive is dead!

  You can buy a new hard drive in a local store, PC or even online, like Amazon, among others. Opt for a similar or greater size than i ' existing. The size is noted in the UK, for example, 250GB, 500GB etc.

  Hard drive bracket is very simple as you may have noticed. You need to remove the caddy with the screw on the side of the old hard drive. Take the old, enters the new then put back inside your laptop. Once mounted, you need to reinstall WIndows from your recovery disks. If you do neither, they may be available for purchase from the Acer support for your region.

  Once completed, you will need to install Windows, your Anti virus updates and other programs, then all the documents you have saved.

• Grid scrolling Image on Mobile

  I'm new to Flex and have been involved in some tutorials that I managed to find in the wek spent more or less. I was thinking to create a mobile application as a test project to enhance my knowledge.

  I have a few questions: -.

  1. I want to create a grid of scrolling images for mobile. Maybe 1 column or multi. The source of the images could be an API call or keep it simple an arraycollection of objects collection containing the image title and image url. Can someone please show an example.

  < s:ArrayCollection id = "imageList" >

  < fx:Object imageTitle = "Test 1" imageURL="resources/1.jpg"/ >

  < fx:Object imageTitle = "Test 2" imageURL="resources/2.jpg"/ >

  < fx:Object imageTitle = "Test 3" imageURL="resources/3.jpg"/ >

  < fx:Object imageTitle = "Test 4" imageURL="resources/4.jpg"/ >

  < fx:Object imageTitle = 'Test 5' imageURL="resources/5.jpg"/ >

  < fx:Object imageTitle = "Test 6" imageURL="resources/6.jpg"/ >

  < fx:Object imageTitle = "Test 7" imageURL="resources/7.jpg"/ >

  < fx:Object imageTitle = "Test 8" imageURL="resources/8.jpg"/ >

  < fx:Object imageTitle = "Test 9" imageURL="resources/9.jpg"/ >

  < / s:ArrayCollection >

  2. what resources (sites Web/books) would you recommend so I can devote myself seriously mobile Flex programming ensuring my Foundation is good.

  IconItemRenderer should be able to accomplish this use case, for example:

  labelField =""

  iconField = "myIconField" iconWidth = "140" iconHeight = "140" / >

  Note that you might want to extend IconItemRenderer and override drawBackground() to change how separators/borders are drawn.  It will be a little easier in 4.6 with the introduction of the method of drawBorders() by SDK-27737.

• I have a samsung saga that runs windows. Any chance firefox mobile will work with my device?

  I have a Samsung saga that works under windows. Any chance firefox mobile will work with my device?

  Mobile Firefox requires an Android phone.

• Photo screensaver on loggon screen Win7 - "there is no images found in"C:\Windows"

  Hey there,

  I try to make a screen saver that appears when no user is logged on.

  I added a few keys in the registry.

  HKEY_USERS->. By DEFAULT-> Desktop-> ScreenSaveActive = 1

  ScreenSaverIsSecure = 1

  ScreenSaveTimeOut = 10

  SCRNSAVE. EXE = path to the .exe (this is a screen saver than does'nt need direct3D: P)

  HKEY_USERS->. By DEFAULT-> Screen Saver.Slideshow-> ImageDirectory = path to image file

  When I start Windows screen saver starts after 10 seconds, but instead of pictures, it shows only a blackscreen and "there is no images found in"C:\Windows"

  I added some pictures of test in C:\Windows, but they also ignored and it is the wrong track anyway...

  I think it's a permission problem, but I don't know how to fix it.

  I hope you can help me.

  Thx for your help! My problem was another... I've hunted the computer from our domain (otherwise it is impossible to change the gp with my restricted permissions), and now it works fine! But many now works the inbuild photo screensaver... I thought that all require win7 direct3D screensaver (test is better than reading: P)

• The system is unable to boot automatically. The BOOT environment variable must be set to a bootable image.

  Hey guys

  I need help, in my company trying to learn switches I flashed my switch all :(

  I now get this error

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only

  switch: dir flash:
  Directory of flash: /.

  3 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch:

  C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
  Updated Tuesday 22 July 02 17:18 by antonino
  WS-C2950-24 from...
  Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
  XMODEM file system is available.
  Initializing the Flash...
  flashfs [0]: 1 files, directories 1
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 7741440
  flashfs [0]: used bytes: 1536
  flashfs [0]: available bytes: 7739904
  flashfs [0]: fsck flashfs takes 4 seconds.
  .. .done boot flash.
  Boot sector file system (bs :) installed, isfd: 3)
  Setting Filesystem block (pb :) installed, isfd: 4)
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  switch:
  switch:
  switch: flash
  Initializing the Flash...
  ... The flash is already initialized.
  switch: dir /.
  Unknown cmd: dir /.
  switch: dir

  List of currently registered file systems:

  Flash [0]: (reading / writing)
  XMODEM [1]: (read-only)
  NULL [2]: (reading / writing)
  BS [3]: (read-only)

  switch: 0
  Unknown cmd: 0
  switch: flash_init
  switch: load_helper
  switch: dir flash:
  Directory of flash: /.

  2 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch:

  Hello

  It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.

  Thank you

  Garrett

• I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  the laptop contained Home Basic windows 7 (64-bit) and I want to install windows vista Home premium (32 bit) on a bootable partition that it will be possible to do or tell me the parallel method to move a certain 32-bit operating system...

  I do not understand your question. If the laptop can run Windows Vista, it can probably run Windows 7 too.

  To run Windows 7 64-bit, the processor must be a minimum Core 2 Duo.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

• X1C bios updating bootable image is empty

  Hello

  I am running linux only on my X1C and I want to update BIOS/UEFI, but bootable image in the update of the bios (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030685) is empty:

  $> iso-info g6uj03uc.iso -l
  iso-info version 0.83 x86_64-pc-linux-gnu
  Copyright (c) 2003, 2004, 2005, 2007, 2008, 2011 R. Bernstein
  This is free software; see the source for copying conditions.
  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
  PARTICULAR PURPOSE.
  __________________________________
  ISO 9660 image: g6uj03uc.iso
  Application: NERO BURNING ROM
  Volume : g6uj03us
  __________________________________
  ISO-9660 Information
  /:
  d [LSN 21] 2048 Sep 12 2012 22:56:00 .
  d [LSN 21] 2048 Sep 12 2012 22:56:00 ..
  

  I also tried to burn the image using a friend laptop runing windows, but the image is still empty...

  Someone manages to update their BIOS/UEFI using the windows utility or another boot image?

  Thank you

  Jocelyn.

  dreewoo,

  I'm not familiar with your ISO info tool, but at least on side Windows, these things are often empty.

  When the pieces of work are all in [BOOT] they appear in the form of data files.  When I look at this ISO with 7zip, I see:

  [BOOT]-> Bootable_HardDisk.img-> 0.fat, which seems pretty normal.

  Have you actually tried starting the CD?

  Z.

• New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I have

  New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I get a message that says no. Photos import active.

  This means that you have previously imported these pictures/videos into Lightroom, and you must not (and are not allowed to) import them again.

  Go to your library Module (not the import dialog box) and find the photos, then you can make use of them in any way you want in Lightroom.

• I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I

  I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac

  Hello

  Please see connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• Hello, how can I choose what image the film will show before you press play and the movie starts?

  Hello, how can I choose what image the film will show before you press play and the movie starts?

  You can not.  At least not with Adobe tools.