gadget weather in Windows 7 can not connect to the service

Similar Questions

• Gadgets can not connect to the service

  This is my 4th time formatted my windows 7, but doesn't happen only to the now. My gadgets Google desktop cannot connect to the service. I tried the solutions which are posted on the site and I tried 3 different ways, but still does not work.

  Make sure that your Internet Explorer is not set to work offline.

  Update:

  Microsoft has DISABLED the weather gadgets and currency via a recent update of security, because of worries about the vulnerability associated with these gadgets running on your computer. You can read more here: http://support.microsoft.com/kb/2719662 . Adjust the settings of your computer and all these other 'suggestions' people are, will NOT work. The function has been REMOVED from the operating system. It has also been removed from Windows 8 operating system. There are "theorists" who agrees that there is a security problem in the gadgets or Microsoft just doesn't support gadgets (usually from third party software) and has therefore disabled them in Windows 7 and eliminated in Windows 8.

  Thanks to DaveNYC for the Info. Pass the word, because a lot of people is facing this problem just like you.

• Windows 7 can not connect to the network or see features

  I have a desktop running Windows 7 ultimate connected wireless to my router.  I also have a roku player connected wireless to my router and a sony blu - ray player connected to my router via an ethernet cable.  Roku and blu - ray could receive media streaming from the desktop.  Now, for some reason any they cant.  My office can send and receive e-mail, download from the internet, etc, but my devices cannot communicate with my computer.  My office to view the drive blu - ray in terms of network devices but no more.  Also, when online I could key in my router netgear 192.168 address... and set up the netgear site.  Now all I get is "opps, google chorms could not connect.  Is someone can you please tell me what is happening?

  TKS in advance, Mike Patterson

  Hello Michael,

   
  Thanks for posting your question on the Forum of the Microsoft community.
   
  I apologize for the late response. Please provide the following information for assistance.
   
  1. don't you make changes to the computer before this problem?
  2. what happens when you try to connect to any device?
  3. you receive an error message? If Yes, what is the full and exact error message?
   
  I would suggest trying the following methods and check if it helps.
   
  Method 1:
  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network

  Method 2:
  Check whether the network discovery is enabled.
  Please refer to:
  Enable or disable network discovery
  http://Windows.Microsoft.com/en-us/Windows/enable-disable-network-discovery
  You can also check:
  http://social.technet.Microsoft.com/forums/Windows/en-us/a40896d7-B8E0-4A0A-ad09-f861b686cefe/Windows-7-finding-network-devices?Forum=w7itprohardware
   
  Additional information:
  - Please see the following article to add the device to the computer:

  Add a device or computer to a network
  http://Windows.Microsoft.com/is-is/Windows/add-device-computer-to-network#1TC=Windows-7

  - Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-in/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices
   
  I hope this information helps. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Windows 7 can not connect with the HP printer

  I have a HP Officejet 6500 E709n and I am running Windows 7 Professional on my laptop.  Recently, the printer no longer works and needed an updated driver.  When updating the driver, you must uninstall the previous software.  Once completed uninstalling the new updated driver installation failed.  I get a fatal error message, and after 2 hours with HP support make advanced remote troubleshooting, we found that, whenever I try a new device/printer, Windows 7 is rejected and not allowing the connection indicating the device is not signed digitally.  The problem is the device is digitally signed, but Windows 7 is not recognizing.  How can I get Windows 7 to recognize and allow my printer to work again?  I have tried both add wireless printer and plug the USB cable without success.

  Hi Sheldon,

  What is the accurate and complete error code that you get?

  If you get the error fatal error occurred during installation, I suggest you try the steps from the following link:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02455020&LC=en&DLC=en&cc=us#N3054

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I have Windows Vista, can not connect, is the file 'another user '.

  Hi, I have Windows Vista Ultimate Edition.

  my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve this problem?

  Hello

  Try the methods here, but not exactly the same question that they should help to correct yours.

  Your files must be accessible by any ADMIN account in C:\Users if necessary to migrate
  to another account.

  -----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can not connect with the windows Messenger

  I can not connect with the windows Messenger

  Hello

  In which case it's a server problem, you will get a better response in the Live Messenger forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Forum Windows Live http://windowslivehelp.com/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

  I am weather evauating to buy Dreamweaver CS6...

  Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

  On the connection between States Dreamweaver: "server certificate expired or contains invalid data."

  I tried:

  -ALL Dreamweaver Server configuration options

  -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

  -Make sure the certificate "issued to the"domain name is my domain name. "

  I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

  This has been discussed previously. I recommend reading my old thread for details:

  http://forums.Adobe.com/thread/889530

  But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• Accounting software Microsoft Error Message: can not connect because the version of the application is older than the data base of the company

  Original title:

  Error message

  I use windows 7 laptop I format. After installation of Microsoft, accounting software and I wanted to backup restored it gives me error massage "can not connect because the version of the application is older than the data base of the company.» Up grade the application. " Eventhough I used the software even before I format the computer laptop and does ' t give me the options to upgrade. Need help.

  This means MS accounting requires the latest updates that have been installed originally creating this accounting database

  Accounting MS was abandoned a few years previously, so updates are not driven by windows/office update

• Windows could not connect to the Service Notification of system events

  Yesterday, everything was normal before turning off my computer. However, I saw a message "that Windows could not connect to the Service Notification of system events" after I turn it on now.

  My operating system is "Win7 Ultimate". What should I do to fix this?

  Hi Aporch,

  You can check if System Event Notification Service is enabled and set to automatic.

  Here's how you do it;

  1. Select start > run > and type services.msc.

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.

  If this does not help, try this:

  1. click on the Start button.

  2. type Cmd in the search text box.

  3. press on Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  4 type netsh winsock reset at the shell command prompt, and then press the Enter key.

  5 restart the computer

  If please reply and let us know if your problem is resolved or if you need further assistance

  Aziz Nadeem - Microsoft Support

• I can not connect to the page member ESPN.

  Original title: Windows 8

  I am trying to connect to my Member ESPN page, I am told that I can not connect because the cookies must be enabled. Then, I went to internet and active options cookies for a higher medium setting and then a framework to accept all cookies. Both still did not connect.

  Have you tried all the other links provided?

  See if another program, maybe Anti Virus or other program of type safety, interfere with your access.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports