GAL Replaykit

Similar Questions

• video gal, 1 solution is built in flash plugin like in chrome or waterfox

  video gal, 1 solution is built in flash plugin as in waterfox or chrome, its impossible for the user to set, my OS: Win 8.1
  everything worked fine in waterfox until 35.0, that leak memory, after that, well he had memory small leak before, but after the last update id worsened

  I tried to meany things, & I don't speak of YouTube, I do not speak of anime watch AuEngien & MP4Upload only 2 examples

  I 1s or 2s video gel & then it accelerates to make even the 1 s - 2 s

  
  

• Galaxy NotePro gal and zoom issues

  I try to use Firefox 27 (last) on my Samsung Galaxy NotePro (4.4.2 Kitkat). First of all, I have problems bad gal - delays when scrolling pages and pages of scrolling very slowly. Secondly, there is a problem of very bad zoom. Most of the websites I'll is zoomed and cut a lot. It's a little hard to explain. I also can't zoom out to solve the problem and define the size of the font for children does not help. I also tried Firefox Beta and the same issues are present. Things look OK on Chrome and the other integrated into the browser from Samsung.

  Everything under the hood configuration settings I can try?

  I added myself as a cc and posted a correction to the question. I hope that this can be resolved because FF is the best browser!

• iPhone 6 more relentizacion (gal)

  Hola, queria informar shifts in los iPhone 6 Plus. I have iOS since 9, he notado relentizaciones (gal) en multitarea en cuanto Ahmed 3 o 5 apps. He refitted desde iTunes, configurado como nuevo y sin even copia iCloud y el problema persistia.

  COGI cita en an AppleStore why además los gal notaba una mancha in the pantalla (pixel muerto) y algun problema mas, me sustituyeron iPhone por un renovated, instale el nuevo iOS 9 pero aun of place las relentizaciones, mi novia tiene 6 normal iPhone y no tiene este problema... Ago lo he probado en muchas repeatedly is the multitarea will fluida (suave)

  He probado todas las versiones iOS 9 para ver if accused el mejoraba y in the ultima 9.2.1 Québec ha Morel UN pelin mas parece.

  Unica he found por ahora respond... ES activar en clamp, general, accessibility, increase contrast. Reduce transparencias y oscurecer colores y is noted only the lag in the multitarea.

  Otro bugs that have seen're activando el AssistiveTouch y con el tiempo empiezo a notar mucha mas fluidez... Como if desaparecieran las animaciones y realidad no estan desactivadas why no activo el movimiento, cuando USO pantalla instantaneamente times to vuelve a encender durante a segundo menos algo.

  Por ultimo... He probado varios iphone y noto en muchas repeatedly I have pulsar back veces pantalla why no responde al primer toque're problema iOS o o del material in general, thought that iOS 9... Seria a clon iOS 6, is that ha sido el mejor iOS than he tenido y hablo con conocimiento of causa.

  Alguna respond? Alguna idea of whether that worm tiene con iOS o por falta ram in los 6 more?

  Por favor! Responderme o al menos as quédé ello constancia, without soy el unico as tiene su en 6 more delayed.

  Can not understand Spanish, but if your phone late, try reset.  Also check your storage appliance, if it causes its really full offset.  Go to settings, general use, storage and iCloud.  If it is too full, remove some stuff... save what you want on computer and delete from phone... hope that helps

• Web interface GS748TS issue when configuring the GAL

  We have several GS748TS need reconfiguration of the LAGS, but neither Chrome nor IE 10 (normal mode and compatibility) appear to allow us to access the configuration of LAG.

  In Google Chrome, loads of everything, except for the interface component user to select ports to add / remove a lag (switching-> GAL-> LAG Membership). The same thing happens for belonging to a VLAN.

  In Internet Explorer 10 to the first page after login does even not load correctly. With compatibility mode turned on, clicking switch-> LAG don't display the summary of the LAGS, but the configuration of VLAN membership works very well.

  Any suggestions as to how we can manage the configuration of LAG? A new firmware would be nice

  Switch the system-> management-> Information System Specs:

  Model: GS748TS
  Hardware Version: 00.00.01
  Starting version: 1.0.1.5
  Software version: V5.2.0.10

  In addition to research and in parallel NetGear Tech Support told me this KB:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/23841

  I wonder how long as a whole has been wasted by how many NetGear customers like us since NetGear first was aware of this problem? And they did not bother to update the docs, or include an Errata / read this first sheet?

  Hell, what attitude.

• No Movie Maker sound mi/gal. clips

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: not importing mi/gal. video clips in movie maker, not even on the preview,

  clips of his good with windows media player, using windows7

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Just a suggestion...
  Use a video converter and convert your video in wmv format mpg, then import into Movie Maker.

  t-4-2

• Can I set up two GALs of 5508 controller to two different switches?

  I have a WLC 5508 with a two port going to the n5k LAG switch. I want to add a SHIFT of 6 ports to a different switch (3750E) for redundancy. I can do or the OFFSET needs to be on the same switch?

  Thank you

  -mike

  Hi Mike,.

  The only restriction with respect links aggregation is that all physical links associated with a simple OFFSET must go to the same switch. In the case of Nexus 5 K this can also be 'pair' forming a field of vPC, or for the Catalyst 3750, rocker, which are part of the same battery.

  If you have two LAGS, you can connect the links in GAL 1 to the Nexus 5 K and the links to LAG 2 the Catalyst 3750.

  EDIT:

  In addition it seems that there is a restriction, at least until the 7.6 version, where the WLC only supports a single LAG. See GAL - aggregation of links for more details.

  Concerning

• GAL Loadbalancing

  Dear all,

  hope you can advice me, I have the following problem/challenge:

  I have a 50 SG200 who has (max)? LAG 4 groups, 3 of the lag contain 4 network ports that are connected to server 1 Server 2012 lacp team of 4 gbit abreast of time it works fine on MAC Loadbalancing. but I need to several groups LAG or another solution, I would like to add another server with 4 network ports that also be associated.

  If I create 2 groups of offset of each 8 ports with load IP/MAC instead of MAC Loadbalancing balancing, it would allow me to have 2 servers with 4 network ports to always be loadbalanced? or is it possible to add several groups offset the SG200-50?

  I am new to this area of expertise, so any advice is welcome!

  Kind regards

  Jack

  Hi Jack, there is no manipulation for the number of delays or LAG membership. If you want more lags, you can buy a SX300 that supports 8 gal or a SX500 switch that supports 32 gal.

  -Tom
  Please mark replied messages useful

• is excluded them VLAN interfaces in the GAL

  Hello community,

  I have a problem with the configuration of LAG on Cisco SFE2010P 3xSwitch battery.

  The switch has in fact only web GUI. Console - too, but it is not very useful.

  I need to configure Interfaces 1/g3 and g3/2 in one SHIFT. And VLAN (vlan by default) of 60 and 110 (voice), through to allow.

  After that I configured the LAG with both interfaces, "Port of Vlan" LAG settings show me the vlan 60 is untagged and vlan 110 is labeled.

  But if I take a glance on the 1/g3 Interfaces and "Port to LAN" settings 2/g3, both VLAN interfaces are "excluded". I can't access the default gateway, which is directly connected with this settings. The default gateway is a 3750Stack whose address IP of HSRP. It has two uplinks in port the SFE2010P channel.

  I have only one Interface to 100 Mbps on the SFE2010P connected to a trunk on the spine interface. And it works in this way. But using the links LWL LAG now does not work.

  Why are the VLAN 60 and 110 is excluded on the interfaces in the GAL and how can I change it? Thank you.

  Thank you

  Sergej

  Hi Sergei, you cannot configure the individual port within an OFFSET to a vlan. When you join the VLAN, you must select the offset group, not the individual port.

  -Tom
  Please mark replied messages useful

• GAL/LACP with several VIRTUAL LANs

  Hello

  I have two switches SG-200-50. I created three VLANS on one and define the place of the other - there is no requirement for routing between VIRTUAL LANs. However, I want to trunk between local networks VIRTUAL using with LACP LAG. For example, A button 1-22 ports VLAN 1 and then 23-24 is the junction for this. 25-34 is VLAN2 and trunking is 35-36. VLAN 3 is 37-48 and 49-50 trunking. I seemed to be able to get 1 VLAN, the default, trunking but no VLAN 2.

  I have a few questions:

  1. the SG-200 will allow you to the trunk several VIRTUAL LANs for another switch?

  2. If so - how? I've lived the documentation and it does not mention explicitly "multiple" VLAN with DELAY.

  3 circuits is possible by a LAG (say 6 ports) happening all the VLANS on the switch?

  So the main question is that I want to achieve is possible on this switch. The reason why I'm doing it is of course of redundancy. Carrying one VLAN on both switches is preferable. I just need trunk correctly between them.

  See you soon! Any thoughts appreciated.

  Scott

  Hi Scott,.

  You had questions, which I copied in red. :

  1. the SG-200 will allow you to the trunk several VIRTUAL LANs for another switch?  Absolutely

  2. If so - how? I've lived the documentation and it does not mention explicitly "multiple" VLAN with DELAY.

  I have attached the Administrator's guide.  The OFFSET rules are defined at the bottom of page 82 of the attached document.

  The 200 series supports four lags, or in other words four groups aggregagted of links.

  3 circuits is possible by a LAG (say 6 ports) happening all the VLANS on the switch?  Yes as indicates it page 83 administrator guide.

  Assign up to eight ports active members to the static LAG.

  So the main question is that I want to achieve is possible on this switch. The reason why I'm doing it is of course of redundancy. Carrying one VLAN on both switches is preferable. I just need trunk correctly between them.

  Personally, I prefer to the trunk on gal differently, especially when you are trying only to achieve redundancy and higher aggregate bandwidth between switches.  It is also relevant to the 300 series as the product of the 300 series is just a richer product.

  You want; "I want to trunk between local networks VIRTUAL using with LACP LAG. For example, A button 1-22 ports VLAN 1 and then 23-24 is the junction for this. 25-34 is VLAN2 and trunking is 35-36. VLAN 3 is 37-48 and 49-50 trunking. It seemed to me be able to obtain VLAN 1, the default value, trunking but no VLAN 2. »

  What about using the ports numbers higher for the uplink between switches, I have no particular reason to use these ports except that they are on the right side of the switch.

  A B switch

  ports ports

  VLAN 1 1-24, 47-48 1-24, 47-48

  VLAN2 25-34, 25-34

  vlan3 35-46 35-46

  LAG ports 49-50 49-50

  The advantage of this is that now you have two ports of the traffic load balancing between switches of series two 200.  I could have more if I want, but I want to keep my simple example.

  Create a static OFFSET, by the sound of it you did already.

  I just used my 300 series switch (SF300 - 48P) as a demo, as I don't have a series 200 switch.  Configuration should be roughly about the same.  In my case, I have four ports GiG GE1 to GE4.  I will use GE1 and GE2 as my two members of a group LAG 1.  May sound a bit confusing, but follow below.

  Added two ports for the DELAY, note in the example below GE1 and GE2 are not connected to another switch, so they showup as ports of Eve;

  Also my 300 series switch supports eight groups of LAG, so captures the numbers 1 to 8 as shown in the following screen.

  

  Now that my LAG is created, you'll notice in the screenshot below that VLAN1 is added automatically to the LAG 1 as unmarked frames.

  Note: circled point, I selected LAG in this menu drop-down and then click Go.

  Note: 1 in the Red rectangular box represents GAL Group 1, which consists of GE1 and GE2

  

  Now, I add 2 VLAN group LAG 1 by selecting 2 VLAN selected then LAG and then click go, the following screen came.

  

  I clicked on the button marked radio in the rectangle above, to allow VLAN 2 send labeled on group GAL 1 ethernet frames.

  And so on for the other VLANS I migth.

  My methodology or train of thought, was to allow of vlan1 to just send frames unmarked on the Group LAG 1, but any other VLAN later is marked on the Group 1 GAL.

  You should be able to do exactly the same thing on the other switch 200 series.

  in my example, as I then simply take some CAT6 or CAT5e cables and connect GE1 on a 200 series switch to other Ge1 200 series

  I connect then GE2 on a 200 series switch to other Ge2 200 series.

  Now I have the aggregation of links and balancing working between switches.

  Hope this helps

  Best regards, Dave

• BOM dia galera, estou tentando finalize um projeto, fiz a animacao tudo certinho as nao estou access salvar como video, ele salva imagem como sempre (obs nao appears an option adobe media encoder)

  BOM dia galera, estou tentando finalize um projeto, fiz a animacao tudo certinho as nao estou access salvar como video, ele salva imagem como sempre (obs nao appears an option adobe media encoder)

  Did you install Media Encoder from the Cloud of Creative application manager?

  

• How can you import resource gal and durations of resource to P6?

  How can an import resource offset given to P6 of .xls, .mdb, .csv, ASCII files, resources etc. ?
  
  P3 easily done, but I can't find how to get data without manually enter in P6, activity by activity, by resource. If I don't, my resource profiles and costs are not valid! I have TONS of data to deal with, so manual entry is not practical. What I'm missing here? H-E-L-P!

  user8938583,

  Is not to be feared... P6 does a decent job of the import and export of data via Excel... just be careful do not change the column headings in Excel (bad move).

  GAL and durations can be exported in Excel (like many others).

  First of all, create a new P6 custom export model, select "Resource assignments" & choose the data fields you want to export (WBS, project, activity, "Original Lag" or "Remaining Lag" or od ID), and then enter a destination for your new Excel file.

  Export to Excel

  " Modify Data, open the"TASKRSRC"worksheet and change the data in the following fields as the initial offset necessary" or "Remaining Lag", "Initial term" or "Time remaining", Excel to save file.

  * Reimport P6 *.

  May require more than one import/export in order to make all your changes of different...

  Good luck

  Published by: p3_scheduler on January 4, 2010 13:15

• GAL of Safari when it is on YouTube

  Hey friends

  For some time when I am on YouTube watching videos, gets terribly slow Safari, the mouse cursor lagging, and scrolling is not responsive. When to leave Safari and reopening of YouTube, it is very good for a short period of time, but safari then begins to not respond again.

  I use Safari 9.1.1, on end of 2013 MacBook Pro retina, 256 GB, 8 GB, 2.4 Ghz

  Does anyone have a suggestion?

  Thank you for your help

  If you haven't tried this already, give it a try.

  Go step by step and test.

  1 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  2 Delete Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

• iPhone 6s more 3d touch gal

  Hello I have an iPhone 6s over 128 GB when I put my iPhone into landscape mode 3d contact accused with all applications

  steps I did to try to fix it

  restore the device like new I have configured like new and also the restoration of the back did not work

  I restart the device

  Taken to store they didn't know what to do

  Called apple it will transmit video of the LAG that I sent them to the engineers

  You people, I have another defective device or it could be the end of software

  I have to applaud your efforts. You did what I would have suggested that you make, including the inclusion of the item and sending it for review. This isn't a problem, I was able to reproduce on my 6s more running iOS 9.3.2,and but this does not mean that it cannot have an impact on other users. I'm happy genius becomes a glance for you.

• Atv4 & Bluetooth headset gal

  I have a headphones wireless2 Appletv4 and rhythms. When I pair them up the sound is out of sync with the video. Surprisingly, the audio is slightly ahead of the video, for example, I hear that the bat to hit the ball when you look at a fraction of a second before that I see get baseball. When I look at basketball, I hear the crowd begin to applaud when a basket is scored a bit before seeing the ball goes through the hoop. I connected Jaybird Bluebud Xs and the same problem. Watch a movie the audio sync is so boring to render unusable Bluetooth headphones. Is this normal?

  Not sure if this will help, but try adjusting audio ATV, stereo output, if it is not already.

  This airplay trolling thread described the same problem; audio to come earlier than the video. Not sure if there was any solution.