Web interface GS748TS issue when configuring the GAL

Similar Questions

• Web interface error - could not contact the server at this time

  Hey all,.

  Immediately after completing the deployment of the new 2.1 UM I'm running an obstacle when connecting to the web interface. After authentication, with the web interface, I get the following when you select my user type (service provider or aggregator - anyone):

  

  I redeployed the VAPP twice is not a transient deployment problem. Networking seems fine - I can ping from areas on the Internet from the SUSE console. Not sure that this message refers on the 'server' is in contact with. It is deployed on ESXi 4.1 in a cluster vCentre vswitches standard, nothing special.

  Any ideas?

  Kind regards

  Daniel Whittaker.

  Daniel,

  When you get the message after installation, click OK and then refresh the page or click F5.  The message should appear is no longer.

  Kind regards

  David

• no configuration administrator when configuring the computer

  laptop HP envy using windows8

  I do not set up the administrator when configuring the computer. How can I configure an administrator now?

  By default, the first account created during the setup of the PC is the "Administrator" account  Windows, to the best of my knowledge, will allow not a standard user account must be created before an administrator account.  Press the Windows key + X and select Control Panel.  Select user accounts and verify that it is an admin account or not.  If this is not the case, click on change the type of account and it should give the opportunity.  There must be at least one administrator in Windows 8, so this should be an admin account, provided that it is the only one.

  You receive a prompt in a program he needs administrator privileges?  What made enter you the account isn't an admin account?  Some older programs may not recognize it as an administrator account.

• PeopleTools Upgrade From 8.54 8.53 - change Wizard error when configuring the connection to the base

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  I am upgrading from 8.53 to 8.54 and have problems with the "Database Wizard" configuration screen in the wizard to change.  I use SQL Server 2012 for the database, change Wizard is running on the new server of 8.54 applications.  I use the following information when defining the configuration screen:

  Type: Microsoft SQL Server

  DatabaseName: PSHRPROD

  Database server name: PTY2DBAREH002

  User name: {AdminUser}

  AccessID: {DB user who is administrator system right now}

  ConnectID: {valid connect ID which has been vailidated}

  Current homes:

  PS homepage: \\servername\PT_853

  PS App Home: file://servername/PT_853\\servername\PT_853

  PS Cust homepage: \\servername\PT_853

  New homes:

  PS-home: D:\rootPS\PT_854

  PS App Home: D:\rootPS\PS_APP_HOME

  PS Cust home: D:\rootPS\PS_CUST_HOME

  When I clck 'Next', I get errors...

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  (1) I have validated that the path contains the path to 64-bit SQL tools.

  (2) the ODBC connection is set up under 64-bit and 'System' - it is also 32 bits of the system and user Setup, but also the 64-bit user.

  (3) I used the SQL Server sqlcmd.exe with access code and was able to connect from this machine and run the SQL commands.

  (4) I'm sure I've done the other stuff but don't remember.

  Please let me know if anyone experienced this or has any ideas.  I'm waiting on Oracle to react to the case after I opened it when their suggestion didn't work.

  Thank you

  Ryan

  I ended up working with Oracle Support, that had me do some things... I also did a thing on my own and with these changes, I am able to connect now.  If it does not please let me know... I tried a few other things that I don't think had no effect.

  (1) removed the Environment Variable "PS_SERVER_CFG" - I found in a document oracle that this could cause problems.  I have not set this manually, but Oracle says it is used to run data mover or SQR scripts outside of the process scheduler.  It must have been added as part of the installation so I'll add it again later.  This change did put a slight change to error messages, so it have some effect, but does not solve everything.

  (2) with the upgrade of 8.53 8.54 I had to add a 32-bit ODBC user DSN.  Even if change assistant 8.54 uses 64-bit, it seems that 8.53 connections are still serving who connects via ODBC 32-bit.

  (3) make sure that the paths configured in the wizard to change are not UNC, if they are matched with a drive and configure using readers.

  Good luck.

• Issue by configuring the master repository in ODI

  Hello
  
  I just downloaded and installed ODI. I wanted to create the master repository in Sql Server 2005 (service Pack2). I gave the following string for SqlServer: / / < servername >: 1433; selectMethod = cursor; databaseName = odimaster; integratedSecurity = false. I also entered a valid user name and password. Apart from that, I copied the sqlJdbc.jar file in the OraHome_1\oracledi\drivers directory.
  
  The above results in an error. All the world is facing this problem?
  
  Thank you
  
  Amol

  Hello Amol,

  If you are using the same connection details like when you configure the repository but simply by changing the name of the base, then in theory this should work.
  It gives you the same message if test you for other databases.
  How you start the topology are managing in the start menu?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Issue when executing the planning of business rules

  Hello
  
  I get the following error when trying to run a Planning Business Rules of EPMA production environment. The same rules of business work without any problem in UAT which is exactly in line with the production.
  
  Getting the following message while starting business rules:
  
  Error detected while trying to perform the work: naming rules
  
  Newspaper:
  
  [ACTIVE] ExecuteThread FATAL: '2' for queue: com.hyperion.planning.calcmgr.HspCalcMgr '(self-adjusting) weblogic.kernel.Default"- cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  -Cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  
  FATAL Thread-2352 calcmgr.launch - Server/Application/base of data: localhost Business Rule Name: user: M05 FP data planning.     Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  Please could someone tell if you're aware of something like this?
  
  Thank you
  Jean

  Remove essbase Server console of Regional service,
  Add Server Essbase with IP address or host name and try again.

• Commit failed when configuring the driver settings

  Hello

  When I try to set up the validation of "capture workspace webcenter console" driver I get the error like "Failed to Connect to imaging system. "Could not connect po"

  basically he asks UserID-weblogic, Imaging Web service URL - Pwd-xxxxx, political base of security http://localhost:XXXXX/Imaging/ws

  When I copy the URL and paste it into the browser, I get a 403 forbidden as output.

  Ref points:

  I checked the imagery in deployments and is active.

  My capture Webcenter is an area (under windows) and IPM is in another (linux)

  Hello Ryan,

  The error has been resolved, it was a stupid mistake, the machine (windows) capture did not file server IPM (OLE) host mapping. By the time I traced it showed me the message 'Connect'

  Thanks for your time again.

  Kind regards.

• CHOOSE BETWEEN STANDARD OR ADMINISTRATOR WHEN CONFIGURING THE ACCOUNT TYPE

  Windows recommends the introduction of standard user account Type no administrator because it is safer for the calculation of daily. I'm the only user who will never access my computer, why not choose administrator? Windows don't warn me (are you sure? Yes/No) if I try to edit or delete anything either by performing security or computer works? If not, please give an example of what could happen by choosing administrator. It's annoying to have passwords Setup and answer Yes or no jump - up when I have to.

  Thank you ~ T. Mustela

  In Windows Vista, you have the new feature called UAC, user account control. If it's on then whenever you try to do Admin tasks he will warn you though that you operate in admin account. If you want to use the administrator account, then make sure that user account control is enabled, check in the control panel in the Windows Security Center, if it is turned off it will show you.

• Permissions issue when editing the Task Scheduler Action tab

  Hi all

  I went to my Scheduler of tasks and found something.

  When I hit 'properties' and looked under the 'Action' tab, it says Manager custom.

  That the devil which means?

  I hit the "Edit" button to see what would happen and he said that I'm not allowed to change.

  Why would it be?  I have the darn computer.

  Any help would be great. Thank you.

  Binner

  Original title: Manager of the tasks/Planner

  Hello

  I apologize for the late response.

  You can change an existing task only if you have full administrator permission to the user account. You can follow the below mentioned link to do the same.

  Change an existing task

  http://TechNet.Microsoft.com/en-us/library/cc766442.aspx

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Media Center crashes when configuring the TV signal

  I bought a new computer there with Windows 8 (64-bit) a month and set at level to Pro pack for the Media Center. I use a TV HDHomerun tuner that is connected to the network that worked fine on my old machine of Windows 7 and Windows 8 new machine until this week.  I noticed that a show than I had expected did not record.  I found that Media Center did not find a signal.  When I started the process of signal TV Media Center froze.  After several trials, Media Center not continue and set up a TV signal.  I get a popup that says that Media Center has stopped working and closes.  I also received an error in Media Center indicating that Media Center has encountered a serious problem.

  I searched for this resolution and have not found one. I tried a clean boot and received the same error and crash.  I uninstalled Media Center, then reinstalled, which did not work. I also deleted files of database to let Media Center rebuild, which also did not work.  SFC \scannow comes out with no error.
  Can someone help me please?  I feel I lost the $100 for the Media Center of the Pro Pack.  All of this worked smoothly in Windows 7.  That's happened?

  If I can add my two cents to this, even if the thread is a year old, I have two tuners TV, one by HP and DIAMOND.  The DIAMOND is new and has not been tested with Win7, but the HP tuner worked fine with Windows 7, and it worked with Windows 8.1... once.  Now, whenever I try to use Windows Media Center to put in place my TV signal or watching television, the receiver service crashes, restarts and continues to hang until I have leave any action calls this service.

  The Compatibility Center said that the DIAMOND tuner is compatible with Win8.1, but not the HP tuner.  However, the computer is a HP.

  EDIT: Look in the event viewer and all ehRecvr.exe accidents are related to C:/Windows/SYSTEM32/vorbis.acm.  This file is associated with FL Studio.  I renamed the file vorbis.acm.bak and tried again, and made me the error.

• Odd choice issue when usign the marquee tool...

  boy, I hope someone knows the answer to that.

  When I chose something of an image and copy it to a new image (using the marquee, selection tool, select copy, paste it into a new image layers I'm trying)... I get the 1px boring 'edge' to the image that resembles a transparency of 50% around him.  My plumage is set to 0px.

  I have no idea where the parameter is to remove it.

  It's Photoshop CS3 10.0.1 on PC.

  Let me know.

  Dave was soon

  In the tool mark there may be a setting in "refine edge"?  Adjustments can be made once the selection is made.

• Driver issue when installing the wireless card

  I have Laptop Inspiron 15 3521

  and I can not install the drivers for the 1705 network dell wireless-N card

  I have download the right drivers for dell support using my service tag, but the installation fails every time

  any ideas?

  Provide the hardware IDs of your network controllers and unknown devices. See here:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-ids-and-downloading-and-installing-dell-system-drivers-in-the-correct-order/checking-hardware-ids-in-the-device-manager/

  Dell drivers and downloads sometimes strange lists the bad wireless card.

• Integrate the ICB with web interface

  Hi all

  We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?

  Thank you

  Kanu

  Kanu,

  Unfortunately, there is no easy or good way to create a web interface with CVI directly.  You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms.  There are some resources with more information on the web forms, including this Walkthrough.

  Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on.  According to the works of your code, you have a few options on how you try to bring together these two languages.  You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code.  However, a better solution would probably be to use Of network Variables to communicate between the two programs.  Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.

  Hope this helps,

  Jen W

  Technical sales engineer

  National Instruments

  NI.com/support

• Not able to connect to the web interface for a C20

  I have a C20 running 6.0.1 and impossible to access the web interface. I checked all the IP settings using the remote and have achieved nothing out of the ordinary. I am able to ping the C20 and get the cisco logo on the tab of the internet Explorer, but cannot connect. Someone at - it experianced this before?

  Hi Justin,

  Where you can do telnet/ssh to the codec and only the web interface does not come to the top, well want to check HTTP and HTTPS mode and turn it on according to the requirement;

  xConfiguration HTTP NetworkServices Mode: on

  xConfiguration HTTPS NetworkServices Mode: on

  In addition, it is registered on any CUCM?

• Problems with the web interface of connection vcenter 5.1

  Guys,

  What don't understand me, I've set up a new virtual appliance version of vcenter test 5.1, I can connect just fine using vsphere client and console, but the web interface refuses to agree with the same identifiers. What is happening with this single sign? I really do not understand.

  You guys could help me please?

  I stumbled upon this same question.  5.1 with the search service is completely different than 5.0, this is why the others are not working.

  Here's what I did to solve the problem.  I turned on the regeneration of SSL certificate:

  1. Navigate to https://[IP]: 5480 and connect
  2. Go to the Admin tab and press the button "Toggle the setting of certification" until activated regeneration 'certificate' displays Yes
  3. Go to the network tab and change the host name.  This will trigger a regeneration of SSL (or you can change the ip address).  I don't know if change 'localhost' to something else helped, but it can't hurt.
  4. Restart the box (restart System tab button.)

  At this point, you can look at the start-up of the machine of vcenter console messages.  You will notice some messages about detection of a new hostname or IP and regenerate a new certificate.  You will see all the services to import it again SSL ceritifcates so.

  At the end of the reset, I was able to connect to the web client to vCenter!

  HTH