GAL Loadbalancing

Similar Questions

• video gal, 1 solution is built in flash plugin like in chrome or waterfox

  video gal, 1 solution is built in flash plugin as in waterfox or chrome, its impossible for the user to set, my OS: Win 8.1
  everything worked fine in waterfox until 35.0, that leak memory, after that, well he had memory small leak before, but after the last update id worsened

  I tried to meany things, & I don't speak of YouTube, I do not speak of anime watch AuEngien & MP4Upload only 2 examples

  I 1s or 2s video gel & then it accelerates to make even the 1 s - 2 s

  
  

• Galaxy NotePro gal and zoom issues

  I try to use Firefox 27 (last) on my Samsung Galaxy NotePro (4.4.2 Kitkat). First of all, I have problems bad gal - delays when scrolling pages and pages of scrolling very slowly. Secondly, there is a problem of very bad zoom. Most of the websites I'll is zoomed and cut a lot. It's a little hard to explain. I also can't zoom out to solve the problem and define the size of the font for children does not help. I also tried Firefox Beta and the same issues are present. Things look OK on Chrome and the other integrated into the browser from Samsung.

  Everything under the hood configuration settings I can try?

  I added myself as a cc and posted a correction to the question. I hope that this can be resolved because FF is the best browser!

• iPhone 6 more relentizacion (gal)

  Hola, queria informar shifts in los iPhone 6 Plus. I have iOS since 9, he notado relentizaciones (gal) en multitarea en cuanto Ahmed 3 o 5 apps. He refitted desde iTunes, configurado como nuevo y sin even copia iCloud y el problema persistia.

  COGI cita en an AppleStore why además los gal notaba una mancha in the pantalla (pixel muerto) y algun problema mas, me sustituyeron iPhone por un renovated, instale el nuevo iOS 9 pero aun of place las relentizaciones, mi novia tiene 6 normal iPhone y no tiene este problema... Ago lo he probado en muchas repeatedly is the multitarea will fluida (suave)

  He probado todas las versiones iOS 9 para ver if accused el mejoraba y in the ultima 9.2.1 Québec ha Morel UN pelin mas parece.

  Unica he found por ahora respond... ES activar en clamp, general, accessibility, increase contrast. Reduce transparencias y oscurecer colores y is noted only the lag in the multitarea.

  Otro bugs that have seen're activando el AssistiveTouch y con el tiempo empiezo a notar mucha mas fluidez... Como if desaparecieran las animaciones y realidad no estan desactivadas why no activo el movimiento, cuando USO pantalla instantaneamente times to vuelve a encender durante a segundo menos algo.

  Por ultimo... He probado varios iphone y noto en muchas repeatedly I have pulsar back veces pantalla why no responde al primer toque're problema iOS o o del material in general, thought that iOS 9... Seria a clon iOS 6, is that ha sido el mejor iOS than he tenido y hablo con conocimiento of causa.

  Alguna respond? Alguna idea of whether that worm tiene con iOS o por falta ram in los 6 more?

  Por favor! Responderme o al menos as quédé ello constancia, without soy el unico as tiene su en 6 more delayed.

  Can not understand Spanish, but if your phone late, try reset.  Also check your storage appliance, if it causes its really full offset.  Go to settings, general use, storage and iCloud.  If it is too full, remove some stuff... save what you want on computer and delete from phone... hope that helps

• Web interface GS748TS issue when configuring the GAL

  We have several GS748TS need reconfiguration of the LAGS, but neither Chrome nor IE 10 (normal mode and compatibility) appear to allow us to access the configuration of LAG.

  In Google Chrome, loads of everything, except for the interface component user to select ports to add / remove a lag (switching-> GAL-> LAG Membership). The same thing happens for belonging to a VLAN.

  In Internet Explorer 10 to the first page after login does even not load correctly. With compatibility mode turned on, clicking switch-> LAG don't display the summary of the LAGS, but the configuration of VLAN membership works very well.

  Any suggestions as to how we can manage the configuration of LAG? A new firmware would be nice

  Switch the system-> management-> Information System Specs:

  Model: GS748TS
  Hardware Version: 00.00.01
  Starting version: 1.0.1.5
  Software version: V5.2.0.10

  In addition to research and in parallel NetGear Tech Support told me this KB:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/23841

  I wonder how long as a whole has been wasted by how many NetGear customers like us since NetGear first was aware of this problem? And they did not bother to update the docs, or include an Errata / read this first sheet?

  Hell, what attitude.

• No Movie Maker sound mi/gal. clips

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: not importing mi/gal. video clips in movie maker, not even on the preview,

  clips of his good with windows media player, using windows7

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Just a suggestion...
  Use a video converter and convert your video in wmv format mpg, then import into Movie Maker.

  t-4-2

• Can I set up two GALs of 5508 controller to two different switches?

  I have a WLC 5508 with a two port going to the n5k LAG switch. I want to add a SHIFT of 6 ports to a different switch (3750E) for redundancy. I can do or the OFFSET needs to be on the same switch?

  Thank you

  -mike

  Hi Mike,.

  The only restriction with respect links aggregation is that all physical links associated with a simple OFFSET must go to the same switch. In the case of Nexus 5 K this can also be 'pair' forming a field of vPC, or for the Catalyst 3750, rocker, which are part of the same battery.

  If you have two LAGS, you can connect the links in GAL 1 to the Nexus 5 K and the links to LAG 2 the Catalyst 3750.

  EDIT:

  In addition it seems that there is a restriction, at least until the 7.6 version, where the WLC only supports a single LAG. See GAL - aggregation of links for more details.

  Concerning

• is excluded them VLAN interfaces in the GAL

  Hello community,

  I have a problem with the configuration of LAG on Cisco SFE2010P 3xSwitch battery.

  The switch has in fact only web GUI. Console - too, but it is not very useful.

  I need to configure Interfaces 1/g3 and g3/2 in one SHIFT. And VLAN (vlan by default) of 60 and 110 (voice), through to allow.

  After that I configured the LAG with both interfaces, "Port of Vlan" LAG settings show me the vlan 60 is untagged and vlan 110 is labeled.

  But if I take a glance on the 1/g3 Interfaces and "Port to LAN" settings 2/g3, both VLAN interfaces are "excluded". I can't access the default gateway, which is directly connected with this settings. The default gateway is a 3750Stack whose address IP of HSRP. It has two uplinks in port the SFE2010P channel.

  I have only one Interface to 100 Mbps on the SFE2010P connected to a trunk on the spine interface. And it works in this way. But using the links LWL LAG now does not work.

  Why are the VLAN 60 and 110 is excluded on the interfaces in the GAL and how can I change it? Thank you.

  Thank you

  Sergej

  Hi Sergei, you cannot configure the individual port within an OFFSET to a vlan. When you join the VLAN, you must select the offset group, not the individual port.

  -Tom
  Please mark replied messages useful

• GAL/LACP with several VIRTUAL LANs

  Hello

  I have two switches SG-200-50. I created three VLANS on one and define the place of the other - there is no requirement for routing between VIRTUAL LANs. However, I want to trunk between local networks VIRTUAL using with LACP LAG. For example, A button 1-22 ports VLAN 1 and then 23-24 is the junction for this. 25-34 is VLAN2 and trunking is 35-36. VLAN 3 is 37-48 and 49-50 trunking. I seemed to be able to get 1 VLAN, the default, trunking but no VLAN 2.

  I have a few questions:

  1. the SG-200 will allow you to the trunk several VIRTUAL LANs for another switch?

  2. If so - how? I've lived the documentation and it does not mention explicitly "multiple" VLAN with DELAY.

  3 circuits is possible by a LAG (say 6 ports) happening all the VLANS on the switch?

  So the main question is that I want to achieve is possible on this switch. The reason why I'm doing it is of course of redundancy. Carrying one VLAN on both switches is preferable. I just need trunk correctly between them.

  See you soon! Any thoughts appreciated.

  Scott

  Hi Scott,.

  You had questions, which I copied in red. :

  1. the SG-200 will allow you to the trunk several VIRTUAL LANs for another switch?  Absolutely

  2. If so - how? I've lived the documentation and it does not mention explicitly "multiple" VLAN with DELAY.

  I have attached the Administrator's guide.  The OFFSET rules are defined at the bottom of page 82 of the attached document.

  The 200 series supports four lags, or in other words four groups aggregagted of links.

  3 circuits is possible by a LAG (say 6 ports) happening all the VLANS on the switch?  Yes as indicates it page 83 administrator guide.

  Assign up to eight ports active members to the static LAG.

  So the main question is that I want to achieve is possible on this switch. The reason why I'm doing it is of course of redundancy. Carrying one VLAN on both switches is preferable. I just need trunk correctly between them.

  Personally, I prefer to the trunk on gal differently, especially when you are trying only to achieve redundancy and higher aggregate bandwidth between switches.  It is also relevant to the 300 series as the product of the 300 series is just a richer product.

  You want; "I want to trunk between local networks VIRTUAL using with LACP LAG. For example, A button 1-22 ports VLAN 1 and then 23-24 is the junction for this. 25-34 is VLAN2 and trunking is 35-36. VLAN 3 is 37-48 and 49-50 trunking. It seemed to me be able to obtain VLAN 1, the default value, trunking but no VLAN 2. »

  What about using the ports numbers higher for the uplink between switches, I have no particular reason to use these ports except that they are on the right side of the switch.

  A B switch

  ports ports

  VLAN 1 1-24, 47-48 1-24, 47-48

  VLAN2 25-34, 25-34

  vlan3 35-46 35-46

  LAG ports 49-50 49-50

  The advantage of this is that now you have two ports of the traffic load balancing between switches of series two 200.  I could have more if I want, but I want to keep my simple example.

  Create a static OFFSET, by the sound of it you did already.

  I just used my 300 series switch (SF300 - 48P) as a demo, as I don't have a series 200 switch.  Configuration should be roughly about the same.  In my case, I have four ports GiG GE1 to GE4.  I will use GE1 and GE2 as my two members of a group LAG 1.  May sound a bit confusing, but follow below.

  Added two ports for the DELAY, note in the example below GE1 and GE2 are not connected to another switch, so they showup as ports of Eve;

  Also my 300 series switch supports eight groups of LAG, so captures the numbers 1 to 8 as shown in the following screen.

  

  Now that my LAG is created, you'll notice in the screenshot below that VLAN1 is added automatically to the LAG 1 as unmarked frames.

  Note: circled point, I selected LAG in this menu drop-down and then click Go.

  Note: 1 in the Red rectangular box represents GAL Group 1, which consists of GE1 and GE2

  

  Now, I add 2 VLAN group LAG 1 by selecting 2 VLAN selected then LAG and then click go, the following screen came.

  

  I clicked on the button marked radio in the rectangle above, to allow VLAN 2 send labeled on group GAL 1 ethernet frames.

  And so on for the other VLANS I migth.

  My methodology or train of thought, was to allow of vlan1 to just send frames unmarked on the Group LAG 1, but any other VLAN later is marked on the Group 1 GAL.

  You should be able to do exactly the same thing on the other switch 200 series.

  in my example, as I then simply take some CAT6 or CAT5e cables and connect GE1 on a 200 series switch to other Ge1 200 series

  I connect then GE2 on a 200 series switch to other Ge2 200 series.

  Now I have the aggregation of links and balancing working between switches.

  Hope this helps

  Best regards, Dave

• NSX API to modify a virtual server Loadbalancer

  Hello.

  I use NSX API to add load balancer pools and to redirect the connections using application rules.

  LB is a virtual server. Based on the State of the application, it will redirect to different pools.

  I am able to use the API to add pools, rules of application.

  But I can't find any API to change the virtual server to add the rule to it.

  Ideally should be a POST operation on https://nsxmgr/4.0/edges/ {id} / loadbalancer/config/virtualservers / {Vside}

  But it is not there in the NSX 6.1 API guide. And when I tried to do a POST, a 405 error (POST not supported).

  Any help on how to change a virtual server LB via API is much appreciated.

  
  

  Thank you

  Editing objects are with the HTTP method 'PUT '.

  Are creating objects with the HTTP 'POST' method

  I understand that you try to change an existing VIP, then you should try with the HTTP method 'PUT '.

  Can try again you?

  If you still face the question, can you send the exact URL + the payload that you send.

  Thank you

  Dimitri

• vRA 6.2 with loadbalancer F5

  We have a problem when you try to deploy distributed with loadbalancer F5 installation vRA6.2. The issue seems to be with load balancer. When you turn on the unit first, after 10 minutes all services are listed as being registered (which is the usual normal behavior) However, when we change the host settings to point to the FULL Loadbalancer VIP domain name, most of the services fail to start in catalina.out below error

  -------------------------------------------------------------------------------------------Catalina.out-----------------------------------------------------------------------------------------------------------------------------------------

  2015-03-30 14:03:01, 687 vcac: [component = "coffee: catalog" priority = "INFO" thread = tenant "taskScheduler-1" = ""] org.apache.http.impl.execchain.RetryExec.execute:106 - request retry

  2015-03-30 14:03:01, 710 vcac: [component = "coffee: catalog" priority = "NOTIFY" thread = tenant "taskScheduler-1" = ""] com.vmware.vcac.platform.rest.client.support.RetriableOperation.call:74 - handled Exception during the operation of the new attempt with the message: error e/s on GET request for " " https://MyCloud.Tedata.NET/component-registry/endpoints/types/SSO ': Connection reset; nested exception is java.net.SocketException: Connection reset

  2015-03-30 14:03:01, 710 vcac: [component = "coffee: catalog" priority = "INFO" thread = tenant "taskScheduler-1" = ""] com.vmware.vcac.platform.rest.client.support.RetriableOperation.call:76 - Retries left: [10]. Sleep [20] seconds before the next attempt.

  2015-03-30 14:03:03, vcac 036: [component = "coffee: component - register" priority = thread "INFO" = "eventPublisherExecutor-1" tenant = "" "] org.apache.http.impl.execchain.RetryExec.execute:93 - I/O exception (java.net.SocketException) caught during the processing of request: connection reset

  2015-03-30 14:03:03, vcac 036: [component = "coffee: component - register" priority = thread "INFO" = "eventPublisherExecutor-1" tenant = "" "] org.apache.http.impl.execchain.RetryExec.execute:106 - request retry

  2015-03-30 14:03:03, 045 vcac: [component = "coffee: component - register" priority = thread "INFO" = "eventPublisherExecutor-1" tenant = "" "] org.apache.http.impl.execchain.RetryExec.execute:93 - I/O exception (java.net.SocketException) caught during the processing of request: connection reset

  2015-03-30 14:03:03, 045 vcac: [component = "coffee: component - register" priority = thread "INFO" = "eventPublisherExecutor-1" tenant = "" "] org.apache.http.impl.execchain.RetryExec.execute:106 - request retry

  2015-03-30 14:03:03, vcac 053: [component = "coffee: component - register" priority = thread "INFO" = "eventPublisherExecutor-1" tenant = "" "] org.apache.http.impl.execchain.RetryExec.execute:93 - I/O exception (java.net.SocketException) caught during the processing of request: connection reset

  2015-03-30 14:03:03, vcac 054: [component = "coffee: component - register" priority = thread "INFO" = "eventPublisherExecutor-1" tenant = "" "] org.apache.http.impl.execchain.RetryExec.execute:106 - request retry

  " 2015-03-30 14:03:03, vcac 062: [component =" coffee: component - register"priority ="NOTIFY"thread = tenant"eventPublisherExecutor-1"=" ""] com.vmware.vcac.platform.rest.client.support.RetriableOperation.call:74 - handled Exception during the operation of the new attempt with the message: error e/s on GET request for " https://MyCloud.Tedata.NET/component-registry/endpoints/types/SSO ': Connection reset; nested exception is java.net.SocketException: Connection reset

  2015-03-30 14:03:03, vcac 062: [component = "coffee: component - register" priority = thread "INFO" = "eventPublisherExecutor-1" tenant = "" "] com.vmware.vcac.platform.rest.client.support.RetriableOperation.call:76 - Retries left: [39]. Sleep [20] seconds before the next attempt.

  2015-03-30 14:03:06, 355 vcac: [component = "coffee: shell" priority = "INFO" thread = tenant "" org.springframework.scheduling.config.TaskExecutorFactoryBean #321ff047-1 "=" ""] org.apache.http.impl.execchain.RetryExec.execute:93 - I/O exception (java.net.SocketException) caught during the processing of request: connection reset

  2015-03-30 14:03:06, 356 vcac: [component = "coffee: shell" priority = "INFO" thread = tenant "" org.springframework.scheduling.config.TaskExecutorFactoryBean #321ff047-1 "=" ""] org.apache.http.impl.execchain.RetryExec.execute:106 - request retry

  2015-03-30 14:03:06, 365 vcac: [component = "coffee: shell" priority = "INFO" thread = tenant "" org.springframework.scheduling.config.TaskExecutorFactoryBean #321ff047-1 "=" ""] org.apache.http.impl.execchain.RetryExec.execute:93 - I/O exception (java.net.SocketException) caught during the processing of request: connection reset

  2015-03-30 14:03:06, 366 vcac: [component = "coffee: shell" priority = "INFO" thread = tenant "" org.springframework.scheduling.config.TaskExecutorFactoryBean #321ff047-1 "=" ""] org.apache.http.impl.execchain.RetryExec.execute:106 - request retry

  2015-03-30 14:03:06, 374 vcac: [component = "coffee: shell" priority = "INFO" thread = tenant "" org.springframework.scheduling.config.TaskExecutorFactoryBean #321ff047-1 "=" ""] org.apache.http.impl.execchain.RetryExec.execute:93 - I/O exception (java.net.SocketException) caught during the processing of request: connection reset

  2015-03-30 14:03:06, 375 vcac: [component = "coffee: shell" priority = "INFO" thread = tenant "" org.springframework.scheduling.config.TaskExecutorFactoryBean #321ff047-1 "=" ""] org.apache.http.impl.execchain.RetryExec.execute:106 - request retry

  2015-03-30 14:03:06, 420 vcac: [component = "coffee: shell" priority = "ERROR" thread = tenant "" org.springframework.scheduling.config.TaskExecutorFactoryBean #321ff047-1 "=" ""] com.vmware.vcac.core.service.registry.ServiceRegistryManager.register:123.

  -------------------------------------------------------------------------------------------End-----------------------------------------------------------------------------------------------------------------------------------------

  Certificates are loaded properly on the loadbalancer VIP and configurations are followed according to the https://www.vmware.com/files/pdf/products/vCloud/VMW-vRealize-Automation-61-Deployment-Guide-HA.pdf

  While I have not made the F5 configurations myself, I trust they followed procedures, everyone has experienced the same problem before?

  Health monitors rely on services in place before the transition to a particular node, services cannot start as long as traffic is passed to the first node that starts up.  In general, I put in a folder in the file hosts on the virtual appliance and the IAAS web nodes that point to the name of VIP to the local IP address, then the battery may start with the left in place of health surveillance.

  If you do this on the virtual appliance, make sure that you put the comments of entry outside the GENERATED VAMI (or something like that) guests, as it is rebuilt whenever the device restarts.

  -come to see certificates are loaded on load balancing - I'm not that, just passing traffic through. (Think this is layer4-performance in terms of F5)

• BOM dia galera, estou tentando finalize um projeto, fiz a animacao tudo certinho as nao estou access salvar como video, ele salva imagem como sempre (obs nao appears an option adobe media encoder)

  BOM dia galera, estou tentando finalize um projeto, fiz a animacao tudo certinho as nao estou access salvar como video, ele salva imagem como sempre (obs nao appears an option adobe media encoder)

  Did you install Media Encoder from the Cloud of Creative application manager?

  

• How to check loadbalancer is currently working?

  Hi all
  
  We have implemented as a result of our environment R12 loadbalancer Note: 380489.1 web unique entry point to.
  
  How can we ensure that the load is charge of distrubited between two nodes of AppsTier?
  
  How can we control loadbalancer work?
  
  Kind regards
  Tareq

  Please see these documents.

  Simultaneous treatment - how to ensure the load balancing of the competitor Manager process in the Configuration of CFP - RAC [ID 762024.1
  How to set up and test the failover of the CFP on no RAC environments. [743716.1 ID]

  Thank you
  Hussein

• Ping in Weblogic utility for hardware Loadbalancer?

  Hello
  
  I've implemented a SOA cluster on 2 machines. First machine runs AdminServer and soa_server1, second machine works soa_server2. Now, the next task is to configure a hardware Loadbalancer to spread the load between the two machines and also to achieve HA.
  
  The loadbalancer must ping servers to see if its still alive. WebLogic has such a ping utility? And where is it documented?
  
  Version of the software is the PS3. (WebLogic Server Version: 10.3.4.0).
  
  Thank you and best regards,
  Gerben

  I wonder if the good old 'java weblogic. Administration PING utility"can be of any use to you...

• abstractWSDL points to the physical host name when using URL loadbalanced

  Document tracking "Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle SOA Suite 11 g Release 1 (11.1.1) E12036-04" to implement soa suite 11 g PS2 in two node cluster environment.
  
  Hostname SOA physical server (SOAHOST1 & SOAHOST2)
  
  More SOA is configured with the virtual host name (SOAHOST1VHN1 & SOAHOST2VHN1 Port: 8001) and loadbalancer URL is http://soa.mycompany.com:7777.
  
  Successfully completed installation and the steps of post-installation as update callbackServerURL and serverURL to http://soa.mycompany.com:7777
  
  Also updated HttpServerURL as http://soa.mycompany.com:7777.
  
  Composite SOA successfully deployed to the cluster from jdeveloper soa and tested control of Fusion middleware 11g (EM) webservices. And his works fine.
  
  When I goto page to Test Composite, the WSDL and endpoint URL appear as expected is http://soa.mycompany.com:7777 / soa-infra/services/default/ccValidation/getStatusByCC? WSDL and http://soa.mycompany.com:7777 / soa-infra/services/default/ccValidation/getStatusByCC
  
  
  But when I access the WSDL in the abstractWSDL browser is having hostname of the server that is mentioned below. Cause this problem by calling this webservice of some other jdeveloper 11g bpel processes. When I enter the url http://soa.mycompany.com:7777 WSDL / soa-infra /... in Web service activity (after placing the activity in the corridor of "External References") and wire BPEL to webservice, WSDL url in webservice is changed to http://soahost1.mycompany.com:8001 / soa-infra /... and wiring is faulty.
  
  Since soa suite managed server is configured with the virtual host name, the wsdl file is accessible only by using their virtual hostnames (SOAHOST1VHN1 & SOAHOST2VHN1) and load balancer url. Access WSDL using the physical hostname soahost1 would result in "Page not found" error. Why Jdeveloper isn't able to wire bpel with webservice component.
  
  Question:
  
  Is there any configuration that I need to change for this problem?
  
  Thanks in advance.
  
  Kind regards
  Kumar
  
  ===========================================
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  -< wsdl:definitions name = "getStatusByCC" targetNamespace = "http://oracle.com/sca/soapservice/CreditCardValidation/ccValidation/getStatusByCC" xmlns:tns = "http://oracle.com/sca/soapservice/CreditCardValidation/ccValidation/getStatusByCC" xmlns:inp1 = "http://www.globalcompany.com/ns/CCAuthorizationService" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:flt1 = "http://www.globalcompany.com/ns/CCAuthorizationService" xmlns:out1 = "http://www.globalcompany.com/ns/CCAuthorizationService" >
  -< wsdl:documentation >
  _ * < abstractWSDL > < /abstractWSDL > http://soahost1.mycompany.com:8001/soa-infra/services/default/ccValidation!1.0/getStatusByCC.wsdl * _
  < / wsdl:documentation >
  -< wsdl: types >
  -< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
  < import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
  < / schema >
  -< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
  < import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
  < / schema >
  -< scheme xmlns = "http://www.w3.org/2001/XMLSchema" >
  < import namespace = "http://www.globalcompany.com/ns/CCAuthorizationService" schemaLocation = "http://soa.mycompany.com:7777/soa-infra/services/default/ccValidation/getStatusByCC?XSD=xsd/creditcheck.xsd" / >
  < / schema >
  < / wsdl: types >
  
  ======================================================

  Try to define the interface host and port of Front-ends such as specified in the link below

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/webserv/setenv.html#wp220945

  Address: soap in the dynamic wsdl document is determined according to the following priority:

  # If the Web Service is deployed on a cluster and the cluster host Frontend, Frontend HTTP Port, and the Port HTTPS Frontend are defined, WebLogic Server then uses these values in the server of the dynamic WSDL address.

  # If the previous cluster values are not defined, but the Host Frontend, Frontend HTTP Port and HTTPS front-end Port values are defined for the server on which the Web Service is deployed, WebLogic Server then uses these values in the address of the server.

  # If these values are not defined for the cluster or an individual server, WebLogic Server then uses the address of the server the query WSDL in the dynamic WSDL.