Games with a wired keyboard under Windows

Similar Questions

• Microsoft wired keyboard 500 & Windows 7 x 64

  I use a microsoft wired keyboard with windows 7 x 64.  The software/driver provided by microsoft for this configuration (ITPx64_1033_7.00.260.0) does not work correctly.  The software is supposed to programs other than the default value to allow you to reasign dedicated keyboard keys (mail, calculator, etc.).  However, most of them have no effect.  Any ideas?

  Hi pthubbard,

  Welcome to the Microsoft Answers Forum!

  Uninstall and reinstall the driver software and check if that helps. Try the steps listed in the links below and check, if that helps:

  Troubleshoot wired keyboards that do not or only the category wrong characters:

  http://support.Microsoft.com/kb/258826

  Troubleshoot failures of keyboard shortcuts using three or more keys on the Microsoft keyboards: http://support.microsoft.com/kb/909528

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DR Setup with ebs 11i & databases under windows 11.2.0.3

  Hello

  We have requirements of DR Setup with ebs 11i & 11.2.0.3 database under windows 2003 server 32-bit.

  We follow the metalink document

  Business continuity for Oracle E-Business Release 11i using Oracle 11 g Release 2 and versions later

  Physical Standby Database - Single Instance and Oracle RAC (Doc ID 1068913.1()

  But for many windows of missing steps in this document.

  If someone made the related activity in windows.

  Good to want to share documents through my mail ID: [email protected]

  Thanks and greetings

  Villi Kumar

  Hello

  We created the recovery after disaster for 11i ebs in a windows environment.

  Now, we are conducting an application and a database shall also.

  Once we transition from the primary to the standby, day before the application runs with the new URL.

  Therefore, inform our users about the new URL of the application.

  Thank you & best regards

  Villi Kumar

• With the help of Windows 8 with a wired keyboard and mouse which drags or lethargic

  Hello

  I list a lot on ebay. Recently my mouse and keyboard do not quickly, quite often.  They are very slow.  Letters are missed while he sits there, then appears in.  The keyboard and mouse work fine on MS Word and other applications, but it becomes very frustrating to hold intermittently not working not not back then pop.  Any help is appreciated.

  Sincerely,

  Patric

  Most likely, the problem you are having is that the system is busy on another process and that it cannot respond to the movements of the mouse. Or the system may have blocked entirely (frozen) and could answer is no longer at all.

  If you experience lag or slowless once again, try to open again (Ctrl-Shift-Escape) Task Manager then go to the Details tab of process and write it all down using lots of CPU usage %.  If you recognize the name of the process, you can take measures to put an end to this program to run (right-click on it to put an end immediately if you wish).  If you doesn't recognize, after back here and let us know and we will try to help you identify the culprit.

• Work of the drivers for the sound, wifi, or Apple (with the numpad) keyboard for Windows 10 partition?

  I have a new iMac 21 "with El Capitan installed. I created a partition Windows 10 but in the case of Windows, I can only get sound through headphones (it seems by default helmet optional). Also I can't use WIFI, but I connected LAN and work. Finally, my keyboard is the Apple keyboard with numeric keypad, which works very well under OS X, but does not recognize the numeric keypad in Windows. Can someone help me find the right drivers? As a note: I didn't install through Bootcamp in OS X (kept getting errors during installation), I was able to succeed through the Super Drive, so no, I can't install the drivers through Bootcamp assistant in Windows.

  There is no wizard Bootcamp in Windows. It is only on the side of OS X. You can download BC6 drivers for a USB (regardless of the Deputy BC) of the side OS X using BCA and run setup.exe in the Bootcamp folder.

  

  What were the issues with BC Wizard tries to install W10?

• HP DM1-4110SD touchpad freeze and sometimes keyboard under Windows 8 Pro

  Hello

  I have the following problem:

  When I use the netbook with Windows 8 Pro (64-bit) after some time, the keyboard or touchpad will freeze. I have seen under drivers and downloads there is a fix Windows 7 (KB2621491), but this fix is not available for Windows 8.

  I tried to disable the sleep for the USB root hub, but that doesn't seem to work.

  Is the fix is going to be available for Windows 8, or y at - it another way to make this work?

  Hi Speeder.

  Most of the W7 drivers will work W8. I'm not sure that an individual. More than likely HP won't to material support for W8 on any system purchased before October 1, 2011.

  Take a look at this document http://goo.gl/CO6uV , which provides information on the upgrade of Windows 7 to 8, driver compatibility and much more.

  Please let me know if it helps.

• Receive the error code 22 with ATI Radeon cards under Windows 7

  I have two video cards on my system, an ATI Radeon 2100: currently disabled (Code 22), should I activate this or it will be in conflict with the ATI Radeon HD 3400

  I don't know why this card is disabled.

  * original title - video card conflict: *.

  Hello

  You have two monitors? If this isn't the case, you only need a working card. The 2100 is an edge
  installation program? If so, it has been disabled for the 3400 can be used. Or maybe the old card has been disabled
  When it has been installed and the 2100 can be removed from the system (if physically
  a different card, not an edge).

  Check with Support ATI, their online documentation and drivers, and their forums.

  Drivers and Support ATI
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  AMD/ATI Forums
  http://forums.AMD.com/game/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• can not play the game with Tron wired controller

  I can play with the controller end with my xbox 360 and there recognize fine as well. However, when I play a pc game it starts fine and I can play normally, but the controller does not work. which means that the game does not recognize it

  Hello

  Please follow the steps below and update us with the results.

  Method 1: You can try to uninstall and reinstall the drivers for the controller and check if it helps.

  a. click the Start button.

  (b) in the search box type devmgmt.msc and then press ENTER.

  c. Select the Xbox controller device and right click on it.

  d. now, select Properties.

  e. in the Properties window, on the driver tab, click Uninstall.

  f. After uninstalling the drivers, restart the computer. This should install it automatically the appropriate drivers for it.

  You can download and install the latest driver by using the following link:

  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  For more information, see the links:

  How to connect your Xbox 360 Controller for Windows on your computer
  http://support.Microsoft.com/kb/906347

  How to connect a wireless Xbox 360 controller to your Xbox 360 or Windows PC console
  http://support.Microsoft.com/kb/906947

  If the problem persists, please contact Xbox support for help on this issue.

  http://www.Xbox.com/en-us/forums?XR=shellnav

  Let us know if it helps!

• How are Swedish people have access to English keyboards, but the English people do not have access to Swedish keyboards under Windows?

  I would like to have the language of the interface, so I can write properly with my Swedish friends. How is it, I have to upgrade to get this privelage?

  Yu have not access to the options for the Swedish keyboards (as well as most other) - that you don't have access to is the MUI for the Swedish language.

  To access the option go to the control panel and the "regional and Language Options".

  Click the keyboards and languages options, and then select any keyboard that you want to be able to use.

  Out OK.

• Impossible to get more than 1 channel to read with DAQmx cDAQ-9172 under Windows 7

  I have the cell load, voltage, and input thermocouple connected to a cDAQ-9172. My sensors entries have been scaled and verified in MAX, and all of them work.  DASYLab 13, the driver is "dcDASY.dll" and the hardware configuration is "NI MAX.

  When I add a task NEITHER-DAQmx Analog Input (that is, a set of scales) it appears correctly. If I add a second channel of the task and select it, I get this message:
  'Channel of task name saved with the module is not available. DASYLab resets the module parameters for usable first channel name task. »
  The name of the task remains the same for each new channel I have Add. If I change the name of the task by using the tab to the drop down menu, it says:
  "You have configured several ways out for the module. If you modify the task, you lose the settings. You want to change the task? »
  Both display the same data channels, and I can't work simultaneously several channels. It seems I missed something obvious, but I can't.

  The parameters are:

  Measurement and Automation Explorer 4.6.1
  NOR-DAQmx 9.0

  Material:-cDAQ-9172
  Slot 1 - NOR 9215 (0-10 Vdc analog voltage)
  Slot 2 - NEITHER 9211 (thermocouple)
  slot 3 - NI 9481 (relay)
  slot 4 - NI 9237 (entry deck w / excitement)
  housing 5 - OR 9402 (DIO)
  slot 6 - NI 9263 (0-10 Vdc output analog)

  Thank you

  You can't perform different tasks (continuous) HERE on a single chassis. The first tasks that starts will be 'the resource booking '.

  Combine the AIs of the various modules in a single task (see photo): start by creating the task of thermocouple. Then add AIs 9237 (e.g. Kraft) and 9215 (volts) using the button with the blue, symbol. Set the mode of synchronization of the task of "continue". Save the task, start DASYLab (second photo).

  Change a task (adding channels, etc.) to the MAX while DASYLab works always, will result in unexpected behavior. To synchronize the configuration of MAX with DASYLab, you will need to close/restart DASYLab or use the 'sync' of the function (see photo 3 "syncmax.jpg"). You can set this function as a shortcut by right-clicking on one of the eight green or grey circle things.

  You should think about an update of the MAX/DAqmx drivers. 9.x is a little outdated.

  Updated at least DAQmx 9.9, better 14.x or 15. 0 (stay far 15 1.x).

• Problem with the CD-ROM under Windows 7 drive.

  The CD-ROM drive has a driver problem. Windows 7 on my laptop HP 650. My troubleshooting tells me that it needs to be reinstalled.

  (On a scale of 1 to 10), I'm a computer science 5. Can anyone help without cost me money?

  Try this FixIt of MS http://support.microsoft.com/mats/cd_dvd_drive_problems tool

  PS, no doubt you restarted the PC, then tried again?

• Problem with drop-down list: under Windows, it works, on Mac is not

  Dear forum,

  I'm reworking the script MultiPageImporter2.5 by Scott Zanelli; going to add new features.

  So far, I added a drop-down list so that the user could choose which pages to put a pdf/indd file: odd/even/as well.

  

  However, I encountered a strange problem: on Windows, it works as expected, but on Mac, nothing happens when I click on the shortcut menu. When I write a dialog box, I almost always use the automatic layout and never encountered such a problem before. But in this text the author uses a fixed position for the controls so I followed his style of coding:

  dLog.pageSideMode = dLog.pan4.add('dropdownlist', [10,110,180,40], ["Odd and Even Pages", "Only Odd Pages", "Only Even Pages"]);
  dLog.pageSideMode.selection = pageSideMode;
  

  The drop-down list is visible both on Windows and Mac, but on a Mac, it is not clickable. What I am doing wrong?

  Another question: in the script, the author has created three pop-up windows. In the code, each popup has a different height (the last element of the array 'limits') - 60, 88, 33. Does make sense to make them different if on the screen they are exactly the same (I mean height).

  Here's my version of the script.

  I think the easiest solution for me here is to rework the part fixed dialog for automatic layout.

  Thanks in advance.

  Kasyan

  Hello

  I don't think you're doing something wrong. If you change the vertical position of the popup to 90, the popup works if you click at the top, not if you click on the bottom.

  I think that you have found a bug in the previous DAY.

  P.

• wired keyboard 600 print screen does not work

  System

  Windows XP Professional 32-bit version 2002 Service Pack 3

  Dell Vostro 400

  Intel Core 2 Duo E4500 2.19 Ghz, 3.00 GB Ram

  Since I replaced the original keyboard with Microsoft wired keyboard 600 print screen functions are sporadic at best.  Sometimes Ctrl + PRTSCN works and especially it's not.  Even when Ctrl + print screen does not work I can not copy the active window by using Alt + PRTSCN.   I have a Setup dual monitor at work so that I can have the database, file explorere and opened in a window screen and development in another email.  I tried to download the driver from the Microsoft Web site, but he says that drivers that are installed are later.  (installed on the disc that came with the keyboard)

  Other than to start Microsoft keyboard anyone elese have all the solutions to make it work?

  Hello

  Follow these methods.

  Method 1: Follow these steps to run the keyboard Diagnostics

  (a) start Microsoft Keyboard Diagnostics. To do this,
  Click Start, click run, type mskey in the Open box, and then click OK.

  (b) press several keys to verify that the keys match the keys identified in the MS Key window.

  (c) when you are finished, click exit.

  If you get no response in MS Key on your keyboard, test the keyboard on another computer

  Method 2: You can also use the on-screen keyboard and check if you are able to take screenshot.
  For more information, see this link.
  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard    

  If the methods above do not help, you can contact the Microsoft Hardware support.
  How to contact Microsoft if you have questions about your hardware device
  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Japanese keyboard on windows 7 ultimate (Hiragana)

  with the Japanese keyboard on windows 7 ultimate, there you in katakana of default type.  It's incredibly boring, katakana is almost worthless when it comes to Japanese words how can I switch to write in hiragana?  IT IS NOT Microsoft IME no please do not post solutions for EMI or tell me to use IME in romanji are even more useless because it is a major crutch and even a barrier to learning the language.

  Hello

  I suggest you go through the steps and check.

  Keyboard shortcuts
  
  ALT-~ (tilde): Cycles between kana and direct entry mode
  ALT - SHIFT: Travels of available languages
  ALT-CAPS_LOCK: Past in katakana input mode
  CTRL-CAPS_LOCK: Past in hiragana input mode
  SHIFT - ALT: Allows you to switch between English and Japanese.
  Control - ~: Switches between the current entry mode and the English mode within the Japanese IME.

  TIP: It is tedious to switch between input mode Hiragana and direct entry through the language bar. Instead, you can switch by pressing Alt + Tilde (key below ESC on your keyboard). So, if you need to type Japanese, press Alt + Tilde and start typing. When you are done press Alt + Tilde again to revert to English. To get the same result in Japanese mode, press Control - ~.

  Reference:

  ToggleKeys IME Japanese hiragana?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Japanese-IME-Hiragana-toggle-keys/3b2ffa3e-29ee-4D5A-B65B-dc67c9c869fc

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/changing-Microsoft-IME-language-input-default-it/a63cf759-d665-48b1-93fb-90d4a2d6cb72

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Japanese-IME-with-Windows-7/5917ab33-00A1-498e-ba5f-6b51a8afce6b

  Warning: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• Problems with games under Windows 7

  Someone knows a problem to start Freecell or Solitare under Windows 7? First of all, I fell into it when I bought a new computer (HP Pavilion Elite). When you play games the screen starts blinking annoying way when the mouse is turned on. I returned the computer at Best Buy and the Geek Squad confirmed my problem using their mouse and the monitor. They exchanged the computer for a computer to identicle who then developed similar problems. This was again confirmed by the Geek Squad. They exchanged this computer for an Asus CG series which now shows similar problems in slightly less (though still annoying). If these simple games wasn't buying intention, they revealed a problem that appears to me as being caused by Windows 7. I had years of experience with these games under Windows Vista with no problems at all.

  Hello
   
  I recommend you to update the display adapter drivers and see if it makes a difference. You must be logged on as administrator to perform these steps. 
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on uninstall the driver and follow the instructions.
   
  Restart the computer and let the computer install the generic drivers.
   
  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  If the problem persists then you need to download the latest drivers for card viedeo and install it successfully.
   
  To get the latest drivers, you must contact the manufacturer of your hardware.
   
  If you still experience the problem, then you can create a new user profile.
   
  Steps to create a new user account:
   
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.
  Now search for the question.
   
  For your reference:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile 
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.