HP DM1-4110SD touchpad freeze and sometimes keyboard under Windows 8 Pro

Similar Questions

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Cursor freezes and the keyboard does not not when starting the computer.

  Original title: I can not move the cursor. Why

  After I log on the computer, the cursor is frozen and the keyboard is idle.

  Hi Ron,

  -Were there any changes made to the computer before the show?

  I would suggest trying the following steps and check.

  Method 1:

  Step 1: Start the computer in safe mode and check.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not still in safe mode, then put the computer in a clean boot state and check.

  Step 2: Configure the computer clean boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Run a virus scan to ensure that your computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know the results.

• How to identify and copy a genuine Windows XP Pro?

  Original title - Windows XP Pro

  I recently bought a laptop computer of a person, I really don't know and it works fine, but the version of Windows XP Pro, I don't think a real install or copy, how can I know if it is authentic, and if not could I possibly clone my friends hard drive which has a copy of XP Pro top , and if it is possible how to do. I would be most grateful if someone could let me know an answer to this question please infinitely Lee

  On Monday, January 13, 2014 18:38:11 + 0000, leerichardson331 wrote:

  I recently bought a laptop computer of a person, I really don't know and it works fine, but the version of Windows XP Pro, I don't think a real install or copy, how can I know if it is authentic, and if not could I possibly clone my friends hard drive which has a copy of XP Pro top , and if it is possible how to do. I would be most grateful if someone could let me know an answer to this question please infinitely Lee

  As far as I am concerned, if it is genuine hardly important.
  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you
  do not reinstall Windows properly.

• blue screen after replacing the battery and charger / need of Windows XP Pro disc

  Hi all.

  I bought a used laptop from gateway with Windows XP Professional already on it. The person I got it never gave me the disc of Windows or textbooks and it is out of warranty. I had to replace the battery and the charger after 3 months of use, and it now gives me the blue screen.  I can't enter in safe mode, it gives me just all sorts of codes for Win32 /? (different things). SYS. The blue screen also tells me if this keeps continues to go to F8(Advanced Options), and then choose the option. I called my local tech and he said contact Windows to get a disk to fix the problem. How can I do (I'm not a comp WIZ). So I try here to get any help. I am on a borrowed laptop so if you can help, please send me a personal email to * address email is removed from the privacy *. I get their

  After reading the owner's manual for the NX260X (Chpt. 7, p. 72-74) I am convinced that the laptop, as previously indicated above by PML, is originally came with Windows Vista.
  http://support.gateway.com/s/manuals/mobile/8511886.PDF

  In addition, according to the instructions of the manual recovery (pg.74, means only available recovery Windows are re - install using the supplied DVD.) This is meaningless given that bridge claims the recovery partition was part of laptop computers sold after November 2004.  I agree that, if you decide not to try to fix the errors, you should consider Windows 7.

  However, personally, I would try to fix the mistakes here before you spend a minimum of $100.00 for Windows 7. We usually have a pretty good success rate when the OP stays with the subject.

• Win 8 laptop does not not, freezing and sometimes will not recognize boot device.

  Back story:
  A friend asked me to look at their laptop, because it was very slow and has frozen all the time. a quick inspection, I noticed a few things. After starting windows 8 (not 8.1) the processor turned to 99% of the max. Which may explain the slow down and freezing. She was loaded with adware.

  I backed up his photos and important files used then option factory reset to win 8. After the reset, I have named his computer, gave him a user name and password, then came to mean something in the sense of "configure user settings do not turn off computer. This screen has taken a lot of time and would sometimes change color. I let him do his thing at night. Morning came, and he seemed to have frozen on this screen. I turned it works.

  Current problem:

  Usually when it is powered on it will say there is no bootable media.

  Sometimes, when his engine, windows starts and I can enter a username and pass and sign... However, as the mouse moves, I can click on anything whatsoever. The touchscreen does not work. Its more of a shell of a BONE.

  One of my tech friends think that the hard drive is running out. I don't think that this is the case and wanted a second opinion. IM thinking the error over the whole upward is the problem. I don't have a recovery disk. Is there a file I can put on a flash drive and use it to repair or reinstall Win 8?

  Related issue:

  Its battery is completely shot (don't hold a charge at all) and I can't seem to find a new replacement battery

  I put a repair of windows on a USB tool. Pluged that it active on the computer. He acknowledged the corruption of files, fixed and allowed me to put back correctly.

  Thanks for trying, even if I felt that my question was not being read correctly.

  2 of my tech friends says he can be the hard drive failure. This was not the case either.

  The laptop has a corrupt windows file that was causing problems. zero second release fixed this problem. Now the laptop worked well without any problems for 24 hours.

  This case is closed.

• Satellite T130-13 q - Touchpad freezes and upgraded CPU

  Just I have updated the hard drive 500 GB, added windows edition integral, added the drivers one by one and I'm happy.
  BUT

  The touchpad is terrible, yet drivers are up to date and the system options are cool, but it hangs or is difficult to use - offset by the use of a mouse, but why does this happen and can it be sorted? I have no problems with a USB mouse but the touchpad is a problem even before the changes, it was OK.

  And more than two things. MUCH more important: can I change the processor? -C' is horrible. Think of Intel i7 or quad core Intel processor. How, if so? I think I might change it. RAM and disk is expandable.

  Can I update the graphics card? If so, how?
  It is much more unlikely to be scalable but worth a punt to interrogation.

  Please get back to me, I need to perfect this machine...: P

  Hello

  I put t understand why you bought this laptop if you want to update all

  Regarding CPU and graphics update, there is enough discussion here in the forum. Just use the forum search and both is not possible. You lose the warranty and other s CPU are pre-tested not.

  Regarding your touchpad: why is it horrible? If the drivers are up to date, you should check the preferences. Maybe you should just disable the tapping function or change the sensitivity.

  Good bye

• X 240 jumpy touchpad, freezes and don't click on

  For months now, I've had problems with my X 240 touchpad. After a few minutes of use, and suddenly the mouse pointer seems to jump around, not responding at all, refuse to accept in taps (-> clicks), two-finger-taps. After a few minutes, it works again, but also converted to the painful State after a certain time. The trackball or an external mouse work fine even when the touchpad is not.

  I doubt that it is a software problem because I reinstalled Windows, a certain number of times (8.1 and 10) since I was the camera. Also, I'm using the latest drivers according to the software update wizard.

  Anyone had similar problems? Do I have to send the laptop in for repair? Is this a known issue?

  I got the touchpad replaced by Lenovo Service and now it works fine.

  Really seemed to be a hardware problem.

• How to freeze and unfreeze in the window using Excel from LabVIEW

  Hello

  I created an Excel report file programmatically using LabVIEW. I do the lines for sheet headers and store data using the program.

  The requirement that I need is that when the user opens the Excel sheet, the row header should remain fixed at the top, like the leaf of scrolling down through the user.

  This is possible in Excel, by clicking on the window in the menu bar and then select freeze panes/release components. The same operation that I need to do to LabVIEW. Please let me know how this can be done.

  I use LabVIEW 2009

  Thank you.

  Please see this discussion. TCPlomp is an example of how to do this.

• system freezes and forces arrested without windows

  running windows vista Home premium 32-bit on a computer hp laptop. I ran system restore and system recovery.

  My screen goes to diagonal lines across the screen. I use a cooling device when using my laptop.

  do I have a hardware problem or a software problem?

  http://welcome.HP.com/country/us/en/support_task.html

  ·                Go to the HP Web site > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  You can have either corrupted graphics drivers or graphics hardware fault.

  If the drivers do not resolve the problem, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• I'm trying to update, but the creative cloud window freezes and shows a small window with the red icon cloud in. that neither of these respond to mouse, a beep is heard for error when you click it. can close only with windows Task Manager. I can send a sc

  

  uninstall the desktop application, cleaning by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and reinstall, apps download Adobe Creative Cloud | CC free trial Adobe

• Games with a wired keyboard under Windows

  Merry Christmas!

  Also sorry if this is in the wrong section because I couldn't find a keyboard section.

  I recently got the wired Apple keyboard with numeric keypad (I prefer on the latest keyboards, because I like the keyboard and hate the batteries or having to recharge things).

  Now, I want to know a few things about game with this keyboard. Obviously, I don't have this keyboard to play with, but I want to know if I could. For example, my last keyboard (which was a unwanted gateway OEM keyboard that came with one of my PC) had use so much of me that the WASD keys do have almost no text on them (they are empty). My Apple keyboard will do that? In addition, hold keys for long periods of time or press quickly will damage the keyboard?

  Thanks in advance and have a great Christmas! Or any other holidays!

  The wired keyboard with apple all keyboards and mice of the brand is not compatible with Windows PC. But if you choose to use it with a mac, then the keyboard should not be down for 1-2 years. I hope this helps!

• How are Swedish people have access to English keyboards, but the English people do not have access to Swedish keyboards under Windows?

  I would like to have the language of the interface, so I can write properly with my Swedish friends. How is it, I have to upgrade to get this privelage?

  Yu have not access to the options for the Swedish keyboards (as well as most other) - that you don't have access to is the MUI for the Swedish language.

  To access the option go to the control panel and the "regional and Language Options".

  Click the keyboards and languages options, and then select any keyboard that you want to be able to use.

  Out OK.

• Error - EPPkt.sys and c:\windows\system32\drivers\afw.sys not found and fix crashes in Windows XP Pro computer.

  Original title: during repair XP Pro from the disk installation, everything crashes.

  I am writing this plea on my desktop, pc Win 7 it. The pc is older and elsewhere in the House.

  Due to the white/white space in Add/Remove Programs, after checking the extent of possible for viruses, corruption Reg, etc., the advice of consensus was to reinstall the Windows, using the disc (this XP Pro was on the HARD drive when I got the pc - new to 2009 - and I did the back-up recommended/controlled , and that's what I was doing Rcounter Set up, around 1700 BST.

  Everything seemed to go OK, but black screen of Windows is now the small hourglass circulating and 'Please wait '.  The HARD drive is flickering, but it's been more than 3 hours!

  My second pc was rotten, and I had to reinstall or repair XP Home [disk] a few times. It is only 35 GB, compared to more than 100 on the pc in question - but I've never met before delay.

  Installation messages were as follows:

  EPPkt.sys and c:\windows\system32\drivers\afw.sys not found.  I checked this point, and it should not have caused any problems. It has also sought a labeled disc 'Machine Virtual Network Services', which no doubt, since I did not, was never necessary.

  I'll leave it on - but...

  Help, please!

  Well, I had to bow to the inevitable. Please accept this response as a ' I've been there - it could happen to you. "

  I spoke to BT [they provide my broadband] and the helpful guy asked me to look at the installation and reinstall in a different place. It's OK, but [, BUT] some of the drivers have been zapped in eternity. PCI, sounds, videos. The guy thought BT that these had been modified or replaced since the beginning, whereas they were not available. The XP Prof is on the pc when I got it, but I assumed that the pilots were on the backup disk, I did. No, they were not. And how to go online to search for them if we could not put in place the ethernet connection?
  So, I bought Win - 7 it 32-bit full ed. [be too afraid to try an upgrade].

  It could have been a response in the migration of these from other drivers, but I guess it was time to go.

  As I can't afford to buy new COREL, MS Word, etc, I have installed free VMWare player as a host for my older progs in a virtual environment.

  Another thing came out of this: although what remained of XP has been saved by 7 as WINDOWS.old, I am very happy that I had a HDD eternal with ntfs to preserve my files and installable 3rd party progs.

  I hope this might help someone - thanks for the info.

• Glitter and fuzzy monitor on Windows XP Pro with Service pack 3

  Hello. It seems that I have serious problems with my monitor today. I can hardly see how it flashes and the images and the text appears blurred. I need your help, I can not paste the image here without a link url to show you.

  It is possible that the monitor has gone wrong. Test it on another computer.