gap in the timeline when adding soundtrack

Similar Questions

• Clips change of position on the timeline when you use temporal

  First Elements 10, Win 7 x 64,

  I've implemented a timeline that had four video tracks. When I added a fifth track I started to have problems. More specifically, when I put a picture clip or video yet on the fifth time track used on this new addition clip, existing clips on the third and fourth titles changed their position on the timeline in response to stretching the time applied to the clip on the title above. Why does this happen? I think the clips on the lower video tracks to do not move NOT in response to a stretch of time change for a clip on a track that precedes. How can I get to stay put during the handling of the duration of the clips on the slopes above them?

  Thank you for the ideas.

  I enclose three images to make what I feel clearer that perhaps my words describe above.

  (top) Picture 001: timeline before changing

  (in the middle) 002 image: timeline after you have added a video track 5 and adding a fixed image to this track

  (bottom) Picture 003: chronology after application in time to clip image again on track 5, showing the movement of clips on tracks 3 & 4

  

  

  

  The other tracks are just "ripple".

  To override the ripple, hold CTRL (Cmd on a Mac key) that you add, remove, or edit clips on the timeline.

• Can someone please tell me what is the problem here? There is a blank gap in the timeline.

  Hey,.

  There is a gap in the main sequence. It is visible with activation video once again, but disappears quickly after that. I think the problem is luma key in the subsequence or new update. A project which was started a year ago. Can someone help me with this please?

  What happens when you turn off hardware MPE?

• Advancing the timeline when all the clips are visible?

  Hello world. I'm looking to continue the timeline (basically gotoAndStop) when the Connectionwithsuchprocedures movieclips are visible.

  I'm doing a simple game where the user clicks on differences and they (clips) are made visible in a table of the discovered differences.

  When these clips are visible, the timeline should continue to the weft of congratulation.

  I was given the following code:

  If (mc1._visible & & mc2._visible & & mc3._visible & & mc4._visible) {} somemovieclip.gotoAndStop ("someframelabel"); }

  I replaced "mc1" etc with the instance of the entries in the table of record names which differences were found. However, I do not know where to put this script (I guess it's on the frame where the movieclips become visible when you click differences). In addition, that replace 'somemovieclip' with?

  If someone could help me please, I would be very grateful

  Laurence

  do not use for navigation, and scenes not using the goto functions.  Use the frame numbers or labels and goto methods:

  on (release) {}

  Engine._visible = true;

  If (Rivet._visible & Port._visible & Engine._visible & Aerial._visible) {}

  yourmovieclip.gotoAndStop ("Congratulations");

  }

  }

  to label which frame, go to frame 1 of scene congratulations, click the box and in the properties panel, type congratulations in the input textfield that shows the label.

• start the timeline when I click on the button

  I'm new to flash, and I need a little help to get started. I've used the Panel shares to write a code of still picture one of my calendar. When I test my movie, he remains on the home page, which is good! I also created a "enter site" button on the home page. I want to click on this button and have the beginning of the turnaround at frame 50 timeline (where will my next 'content' label). Frame 50, I want it to stop, and so on for all my labels/pages. The action takes place on the timeline is a pan across a panoramic photograph, which stops at various points.

  see you soon,

  Spaldo

  Instead of...

  gotoAndStop (50);

  use...

  Play();

  OR...

  gotoAndPlay (2);

  Note: unpredictable, sometimes the timeline need an extra push, so if this change plays, put a play(); order in the frame 2 for extra incentive.

• 2015 CC took over at the beginning of the timeline, when voice-over recording

  Im trying to record some simple voiceover for a project. Whenever I click on the microphone icon in the track to start the recording, he jumps at the beginning of the timeline to record.  It doesn't matter what position in the timeline panel, I always leave her start recording from the beginning. I need to be able to specify where to start voiceover recording.  This does not appear to be linked to this particular project that others work great too.  Is there a setting somewhere that I'm missing?

  I thought about it.  I had to delete the entry and exit of the markers.

• How can I close a gap on the timeline?

  I recently move to Adobe Premiere Final Cut Pro Studio 7 CS6 (wasn't feeling X) and I was wondering is there a way to fill a gap in the chronology?  I removed a few sequences and rather have to highlight all of the remaining sequences and bring it back on, is there a way I can just click on a type of "bridge the gap" button similar to Final Cut Pro for this problem?

  Thank you!

  Select Gap > shift > delete

  (Deletion of undulation)

• Activating the timeline when there is no sequence

  I have read all what I am puzzled. I am familiar with RE 8 but used someone elses computer week last to capture a number of. AVI videos on betacam cassettes.

  I try the version track PR pro ver 5.5. I can import my .avi files in the project Panel, but cannot get them to go to the timeline. By double-clicking them penetrates in the Preview Panel, but this is as far as I can go. Panel mounting/sequence is completely empty without video or audio of lines showing track. Also the icon to automate the sending of a number of clips to the timeline is grayed out. I'm sure I missed something simple but would appreciate any help. Thank you

  Before you can edit you need to make a sequence

  Go to file / new / sequence and choose a setting that corresponds to your images.

  If you do not know the one who choose follow these steps:

  

• Page moves to the left when adding Image

  Hello

  It would be greatly appreciated if someone could kindly put a fix for a rather irritating problem that causes web pages to spend maybe 20 px to the left when the images are placed in the content area DIV. main It occurs when you view it in several browsers and whatever versions of DW used namely MX2004, V8 and CS5. The question is particularly endemic when using CS5 set the column templates.

  What the devil I'm doing wrong? Code can be provided if necessary (i.e. it is not a problem that is easily identifiable). I searched Google and this forum but have not found a solution to the problem.

  Thanks in advance

  Without a link to an online site, it is difficult to say. Are you sure this isn't just scroll bars on longer pages?

• Synchronization of four cameras with gaps in the timeline for multi cameras sequence

  I use Premiere Pro Trial CC to edit a multi camera concert. (The trial is just to see if the multi-came thing will work better than CS5) Since there is a limit of 30 minutes on four of my SLR, I have gaps in each of my deadlines of four cameras. All of these tracks were synchronized manually upward with a master audio track.

  In order to create a multi-cam sequence, I need to synchronize the video tracks 1-4, but so far have not been able to do. I tried to clips from each camera of nesting (so video 1-4 are all separate nested clips.)   I turn on the targeting of track for four channels of video and an audio track. Then I press 'I' to select a Point for the selected tracks. Not sure if this is how it works - just guess here.

  I then tries to 'Create Source Multi camera sequences' and tracks synchronization to aid 'In Points' on the nested five (4 video and 1 audio).   When I double click on the sequence of Source Multi camera to preview, I get four video windows appear, but the timing isn't right. It's as if they all were associated with at the beginning of the clip, not the markers that I put in front.

  So that's my problem. I can't synchronize these titles before creating a sequence of Source Multi cameras. I tried the synchronization of audio track, but it fails - too gaps to make it work, I think. I have no timecode. The only way I can think to do is to clip markers. Are some of these features disabled in the trial version?   Thanks for any help on this!

  MacBook Pro

  10.10.5

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  NVIDIA GeForce GT 750M 2048 MB

  All of these tracks were synchronized manually upward with a master audio track.

  Then, with all your video tracks manually synchronize would with your audio master, you are ready. It would be a sequence with audio and 4 video layers. Now that nest, activate multi-cameras and turn on the multiple camera monitor in the program monitor and start your editing.

  --------------------------

  and if you want to try the other route-

  as for the creation of sequence of Source Multi cameras with points, place your points on your clips 4 source using the source monitor, you will only be able to get one on your audio files. That you establish for the created Premiere Pro sequence camera multiple source.

• Do you need a trigger in the timeline when you add an action?

  I'm doing a replay button that works very well in an animation, but when I do exactly the same thing in another it does not work.

  The animation of the work has no label at the end of the animation, no code just triggers not specified in the action and works very well. When I try to do exactly the same thing in another file, it does not at all. Can someone please advise? Am I missing something simple?

  Thank you.

  Kat

  Nevermind, I thought about it and it was something SIMPLE! Instead of the symbols, I just had to select the stage: sym.play(1000) (0)

  I was more complicated than necessary. arghghgh.

• Loss of resolution of the logo when adding video

  Original doc is 300 DPI/PPI with size of 2560 x 1440, then registered under doc. PNG and have tried to add as. PSD, but looks like still like crap when in full screen with the video. How to fix the loss of resolution in CS3?

  It looks like you are using standard def and a compressed video format, so you will lose quality.

• Changing the zoom when adding pages settings

  Hello

  When you add a page to a document with this code:

  app.activeDocument.pages.add(LocationOptions.AT_END);
  

  InDesign automatically returns the zoom setting to FIT_TO_PAGE

  Is there a way to avoid this?

  I would that he should stay on whatever it is.

  Help will be very appreciated!

  Thank you

  Davey

  Hi csm_phil

  Thanks for your response!

  Happens to me to come to discover that!

  I wrote this code:

  currentZoom = theDoc.layoutWindows[0].zoomPercentage;
  theDoc.pages.add(LocationOptions.AT_END);
  theDoc.layoutWindows[0].zoomPercentage = currentZoom;
  

  I have 2 questions now:

  (1) is there a difference between what I wrote "layoutWindows [0]" and you wrote ' windows [0]?

  (2) even if this is not enough, is it possible to prevent it from happening?

  The reason why I ask is because in a script that adds a lot of pages, (for example, the MultiPageImporter script), the script needs to do after the addition of each page.

  If there is a parameter lock or something like that, it would be much more sufficient.

  Thanks again!

  Davey

• Name of the instance when adding to the library

  It is a huge problem for me then probably the stupidest question in the world.

  When addressing movieclips nested like this: _root.movieclip.movieclip.variable

  
  they need to have a set instance name, otherwise they count as undefined. If I can put it in properties with no problem, but when it the removal of the step and then time (manually or by actionscript) the name of the instance are gone, so I can't address clips nested in action script.

  I do not understand how it will work, because each time I have add a clip by code there is no instance name. The only alternative for me up to now has kept the clip on the stage all the time, just outside the limits or invisible so I can still do things like _root.movieclip.movieclip.variable or _root.movieclip.movieclip.gotoAndStop (2).

  Someone enlighten me please because I can not understand it.

  The purpose of instance names must be able to use the same object library many times and targets each separately... an instance of this object here, an instance of this object, etc...  The name of the instance applies only to an object on the stage.  A library object has no instance name until you assign a while she participated in the film.

  When you attach a movieclip using the AS2 code, you must use the attachMovie() method.  In the arguments for this method is when you set the name of the instance...

  this.attachMovie (id, name, depth)

  The 'name' argument is the name of the instance you code will use to target this instance.  Hostel if your case you will use...

  this.attachMovie (id, "movieclip1",...)

  I intentionally only focusing on the instance of the name, the other arguments you know if all goes well do deal with

• Bug in display of the tree when adding nodes dynamically?

  I am building a tree dynamically, child nodes are added only after a user clicks to open a node, and a call is made to see if there are children.
  
  The control is very sensitive, but after a few clicks, that it is as if an object of the same color that the background appears in the middle of the control tree obscuring nodes beneath it.
  
  If I click on the empty area at the location where the darkened nodes would fall meet and expand/collapse becoming visible/invisible as they fall under this area or beyond. If I hover over the empty box I see the node highlighting as a strip about 5 pixels wide on the left side.
  
  Revalidation of the tree redraws not this area. Has anyone seen this before, and how can I fix it?

  The problem disappeared. I think it was a bug is triggered by setting the selected items after I had updated the dataProvider and refreshing the tree.

  I had another question where the selectedItems disappeared after update of the tree. I fixed it by setting using callLater() selectedItems, because put immediately after the update the dataProvider of the tree did not work as long as the selection was lost anyway. callLater to do this fixed the issue of the selection and now apparently also the issue with a section of the tree being overshadowed.