GarageBand > application does not

Similar Questions

• Some applications does not respond after sleep (El Capitan)

  Product: 13 '' Macbook Pro retina (12.1) (base model sheet)

  El Capitan Version: 10.11.6

  The problem:

  When I connect after that my Macbook went down, I often have problems with some of the stock apps. In particular, I had this problem with the Mail Messages, reminders and calendar. This seems to be a problem when they are open before putting the macbook to sleep. This same problem happened with non-apple-stock applications.

  Once logged in, if I click on the application icon, the application window will come into focus. After that, I'm unable to use the application (as if frozen) and I often just see the spinning Rainbow mouse icon.

  Can I force quit the app and then open it again, but now the application does not load.

  To solve the problem, I can restart the macbook and all is well.

  Some others probably associated with funny things I saw (only attracted to this once... but did not look at one time or another):

  I open the calendar application after the macbook was sleeping and my full general calendar was empty (which would be nice if it were true!). In any case, I checked the 'accounts' and also found that there was no accounts! (I have 3 goes). So I wonder if there is a problem with the accounts after sleep since these apps I've had problems with all iCloud account and mail also uses some other accounts.

  Big Question: Is there something I can do to make that happen?

  Thank you very much for your help! Sorry if this is a double post, it is difficult to find an answer via google search.

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to Message, Mail, etc.

  If you still have problems, check the startup disk.

  Launch the disk utility located in/Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

• the iTunes Setup program finishes, but the application does not appear

  For starters, I'm on Windows, but it seems that the system is not the problem because it's happened before, with my Macbook Air.

  I download iTunes on Apple's site and Setup will run as usual and finishes. But iTunes never displayed in Program Files, the destination he was supposed to have downloaded. I opened the Task Manager and tried to manually run the program yourself by using 'itunes.exe', but he writes that the application does not exist.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• The FireFox 42.0.1 application does not start.

  The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
  I had to use IE 10 to contact Mozilla.
  Year annual should be ashamed of this...
  Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
  In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

  It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• How can I cancel a subscription and get a refund? An application does not work, the "assistance of the developer page" link provided by itunes is broken.

  How can I cancel a subscription and get a refund?

  An application does not work, the "assistance of the developer page" link provided by itunes is broken, and email provided by the application developer's sole means of support, but no response in 3 weeks to multiple addresses.

  The page you posted has since how to stop an auto-renewal subscription to renew again (see, change, or cancel your subscription - Apple Support).

  To contact iTunes support try http://reportaproblem.apple.co or https://www.apple.com/emea/support/itunes/contact.html

• On my old iPod Touch (4th generation), the music application does not open

  On my old iPod Touch (4th generation), the music application does not open. Everything will work as before. I suspect it has something to do with the position that the app was (in podcast lists) before the last sync. How can I get the app to open again?

  If you have not already, restart the iPod touch

  Restart your iPhone, iPad or iPod touch - Apple Support

• mail application does not load

  The e-mail application does not load!

  I have iOS 9.2.1 iPad 2

  I deleted and reinstall my mailaccount but still no e-mail program loading

  I've done a re-boot and no luck

  Any suggestions?

  Thank you

  Hi AnitaCas

  It opens then close immediately?
  Try to leave all the apps: Double click on the Home button and the sliding of the application for each open application preview page

  then

  Force reboot: press and hold the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears (no data is lost)

• ATL-TAB within the APPLICATION does not work

  I'm a convert from windows and love the mac but Alt - Tab within the application does not work - very annoying. I often have multiple windows in the same application, and if the only way to go is to use 4 fingers Mission control, it's terrible because Mission control lists all windows in a small size and pain to know that you want to go. While with alt - tab, I can quickly cycle or just go to the last which is often I want to go to.

  It is one of the major issues Mac usability for me.

  Any tips? or addons?

  Thank you.

  Cmd -'

  Curiously, this document has the wrong shortcut. Keyboard shortcuts in Mac - Apple Support

  They have to move to the next application window is to go to the previous application window.

• Application does not work on some machine

  Hi people.

  Have an application which will not run on a certain machine. I installed it on a different machine and everything is ok, but there is no need in particular. All machines are windosw 7 64-bit. Now, there are more elderly labview applications that are installed and work very well its quite recent that used and I'm sure that there has been no upgrade to this machine.

  Compared to the machine which works when I install the app, I have the installation file on a flash drive which I run the Setup file of. On the questionable machine, I can't run the installer directly from the flash drive, I need to copy the file on. I then launch the setup and installation procedure seems to work cut ok when I click the icon that the application does not open.

  I guess it's a problem with the installer on the target computer. Anyone has any ideas or I could check?

  Thank you

  Select this option.

  It turns out that the anti-virus has been the question. I disabled it the programs ran late.

• the host catalyst application does not work

  the host catalyst application does not work

  Could be malicious. See this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Catalyst-Control-Centre-host-application-has/0a0ef1b0-117D-43D8-a43f-9b24228b660b?page=6

• Get error "this application does not work without Google play services"...!

  Hello

  I use google maps in my application and be able to install the apk from file in the BB device. But after installation when launching the application, I get an error "this application does not work without Google play services.

  How can I get google game services to the BlackBerry device.

  Kind regards

  NGO.

  The BlackBerry Runtime for Android applications does not support Google Maps (or Google Services play). If your application uses Google Maps, there are two ways that you can support mapping in your application. One option is to replace the library card theGoogle with a WebView that integrates the web version of Google Maps.

  For more information on this process, see using a WebView to view Google Maps.

  Another option is to replace Google Maps with OpenStreetMap, which is a free card all over the world.

  For more information on this process, see Replace Google Maps with OpenStreetMap.

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba, to no avail.

  my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.

  See the help/support site Tosh or their forums.

  Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.

  Program compatibility test cannot be invoked

• Oracle.adfmf.application does not exist

  Hello

  I installed the 5.1.1 Android and the API level 22.    on my 32-bit Windows 7 platform.

  I have installed and configured the JDeveloper12.1.3 and developed the Appplication of base according to the Oracle JDeveloper 12 c (12.1.3) tutorials - Setting Up Mobile Application Framework

  Now when I try to compile the project, I get the error below.

  
  

  I use the JAVA8.  and I put this JDK paths at the project level in libraries and Classpath

  Error (43): error: cannot find symbol	LifeCycleListenerImpl.java	C:\JDeveloper\mywork\MyMobileApp\ApplicationController\src\application	ApplicationController.jpr
  Error (3): error: package oracle.adfmf.application does not exist	LifeCycleListenerImpl.java	C:\JDeveloper\mywork\MyMobileApp\ApplicationController\src\application	ApplicationController.jpr

  Its clear that the import oracle.adfmf.application.LifeCycleListener;    is a failure. 

  I've added all the mobile libraries to classpath in the JDeveloper, yet the compilation is put down.

  Which library, I need to add to the classpath to resolve this problem?

  Quick help is appreciated.

  -Khaleel

  Hi Shay,

  Thanks for the details. He has solved after I replaced my JDK 1.8.0 with 1.8.0_45 and remove the JDK1.7 from my system.  Now, the project has got compiled successfully without any errors.

  However

  Concerning

  Khaleel

• My creative cloud desktop application does not start. What should I do?

  When I'm away from the app, the app keep buffering and when I restart the application, a message appears telling me to download one version of another but it keep doing the same thing even if I download a new version. So, what can I do?

  

  Please refer to:

  FAQ: What should I do if I get a blank white screen, spinning wheel, or my CC application does not open?

  If you still need assistance, please contact our staff of support directly by following this link: contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?