DeskJet F4283: uninstallL4.bat does not

Similar Questions

• HP Deskjet Ink Advantage 2545: HP Deskjet Ink Advantage 2545 does not print Cyrillic

  Hi all

  My HP Deskjet Ink Adnavtage 2545 does not print Cyrillic characters, for example: България. I installed the latest drivers from the link below, but the problem persists: http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-Ink-Advantage-2540-All-in-One-Printer-ser...

  I will be grateful if you help me to solve this problem.

  Hello

  I called the support in Bulgaria, but the cause has not yet been identified. :-(

  Update (10/03/2015): the problem was caused by the original-black cartridge - which came with the printer. It has been cleaned and now everything works fine.

• Autoexec.bat does not run at startup.

  I have a file Autoexec.bat file which works fine when I run it, but does nothing, apparently, at startup.  It has orders to clear my recent documents folder.  It worked fine when starting until I had to format my hard drive and start all over again, and as I said, it works fine when operating manually.  No idea how to do so that he can run at startup?

  Hi bbran,.

  1. your computer is running on a domain?

  Autoexec.bat does not work on startup, but when the user connecting.
   
  The first thing to test when you are having problems with MS-DOS-based programs is the Windows BACK NTVDM (Virtual Machine) subsystem. You can use the Command.com utility to test whether the NTVDM subsystem works correctly. To start Command.com, follow these steps:
  a. click the Start button and then click Run.
  (b) in the Open box, type command.com, and then click OK.
   
  This should start a command prompt window. If this does not work, then there is a problem with the NTVDM subsystem.
  For more information, see programs running under MS-DOS in Windows XP

  We also recommend you to check if the program is configured to run automatically at startup.
  See related changes that run automatically at startup

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ERROR! Compile in car (CBLBLD. BAT) does not exist!

  1. set up two environment variables, PS_HOME and COBROOT, on the computer where you are going to compile COBOL. (This should be your file server or a machine that has access to your file server.) You can do this from a DOS command prompt window.
  
  Set PS_HOME = C:\hr840
  Set COBROOT = c:\netexpress\base
  
  2. open a DOS commands prompt window, if you have not already, orders and access
  \Setup < PS_HOME >.
  
  3. run CBLBLD. BAT as follows
  < compilation drive > cblbld < build directory >
  where < compilation > is the drive where the compilation takes place, < directory compiles > is the temp
  Directory where the compilation is done
  
  The CBLBLD. BAT file will create the directory to compile for you, if it does not already exist.
  
  Note. Be sure to include a space between the < compilation disc > and < build directory > parameters; they are treated as two different settings within the CBLBLD. Bat batch program. Also ensure that you have write permission < compile player > and < build directory > as the compilation process will take place there.
  
  For example, the following command will have the \src\cbl < PS_HOME > COBOL source and compiling process under c:\temp\compile:
  cblbld c: \temp\compile
  Take note of the information that appears on the screen during the process is running. It provides the location of important files that you need to consider.
  
  
  =========================================================================
  
  I followed all the steps above, but it is not executed
  
  Sometimes, I had
  
  D:\psoft\PT8.52\setup > CBLBLD CBLBLD. BAT D:\TEMP\COMPILE
  
  
  Compilations of Cobol ASCII doing
  ERROR! Compile in car (CBLBLD. BAT) does not exist!
  
  or sometimes I had
  
  D:\psoft\PT8.52\setup > CBLBLD c:\TEMP\
  
  ERROR - wrong number of parameters specified.
  
  Use: CBLBLD_MF CompileDrive CompileDirectory BUILD_option
  
  CompileDrive = the letter of the drive containing the directory
  the compilation takes place
  
  CompileDirectory = rΘpertoire in (CompileDrive)
  
  BUILD_option = "blank", ASCII, EBCDIC, and UNICODE
  
  Examples:
  C: CBLBLD_MF \TEMP\COMPILE ASCII compile
  C: CBLBLD_MF \TEMP\COMPILE ASCII ASCII compile
  C: CBLBLD_MF \TEMP\COMPILE UNICODE compile if unicode.cfg file
  There are
  C: CBLBLD_MF \TEMP\COMPILE UNICODE UNICODE compile
  C: CBLBLD_MF \TEMP\COMPILE EBCDIC EBCDIC compile for DB2/OS390
  
  General use / information
  
  During the build process, the following actions occur;
  
  The source files are copied
  of PS_HOME\src\cbl (D:\psoft\PT8.52\src\cbl)
  at CompileDrive\CompileDirectory
  
  The compiled modules will be copied
  of CompileDrive\CompileDirectory
  at PS_HOME\CBLBINDR (D:\psoft\PT8.52\CBLBINA, CBLBINA or CBL
  BOBY)

  Hello

  Please, try the following, add a blank space between C: and TEMP.

  CBLBLD. BEATS C: \TEMP

  Kind regards

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• DeskJet 2050 A scanner does not work

  I have windows 7 and have installed my all-in-one deskjet 2050A. My printer and copy works fine. My scanner does not work. HP scan does not work. Scan of Windows, irfanview will not work. I can see my scanner in the Device Manager. All the drivers are up to date. I have uninstalled and installed the HP software several times. The diagnosis of HP twain scanning utility, said component does not work correctly. I tried all suggestions please help...

  I don't know if your solution works.  My problem was that the drivers WIA, well installed, could not.  Once activated, everything works fine.

• DeskJet 3522: Black ink does not print

  My HP Deskjet 3522 ceased to print anything in black.  Color printing very well.

  I cleaned the printhead for 5 times, run printer many pages, test and have downloaded and run the utility HP print and scan doctor.  There are some impressions of text improved, now black in a very pale blue gray, which I think is better than nothing at all.

  I read on the forum that it is a fairly frequent problem and am surprised that there is no solution provided by HP.  I understand that if you do not often print it can be some dried up ink cluttering up the printhead.  I print on a regular basis and replace my cartridges regularly.

  About 2 years ago, this happened with my previous HP printer.  I replaced it with this one.  I arrived at the end of the life cycle of the printer a HP?  If so, I'm probably not inclined to get another HP, although I have always appreciated the help of HP printers.

  Does anyone know a solution to this problem?

  Hi again,

  It's good to hear that you use genuine HP cartridges. HP does not guarantee the reloaded cartridges or HP. And that brings me to this:

  If a black cartridge ran last night, and you replace it. Do you have any questions before or after you have replaced the cartridge (or both)?

  From the sounds of it, you are having problems with a new cartridge. If this is the case, you should check the warranty status. If it's a cartridge defective out of the box, it should be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies , select your country/region, and then review the information of limited warranty for your supplies.

  I hope that helps!

• HP deskjet series of 1510 does not print

  We recently mloved to la Gomera (Canary Island) and there I bought an hp deskjet printer 1510. It will not print when connected to my laptop, also a HP with Windows vista, although it is connected, is on and is the default printer. I tried everything the doctor print and scan suggested (like cutting the fire walls, check print ooler, reinstall the driver and software etc.) and everything that I found in the taking in charge of HP. still does not print. When it is connected to our other laptop, HP also but with windows 7, it works fine. The only thing that I managed to print is a diagnostic page but it gives only numbers and letters like SN = CN39a19mmp05yr 21 PG = 81 12 BY =-5 yr 22 FB = 0/0, etc.. Nog is far from help me :-(.  someone knows how to fix this?

  Hello

  Please try the below mentioned steps...

  Click START > device and printer > add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• during installation of HP DESKJET INK ADVANTAGE 3525 does not recognize original black print cartridge

  Hi all

  during the installation of my new printer HP DESKJET INK ADVANTAGE 3525 I discovered, that the printer does not recognize the new black ink cartridge. The black cartridge, as well as the other colours, is original and it was packaged with the printer.

  Thanks in advance for your help and have a nice day!

  Hello @Hugh_G,

  Welcome to the HP Forums

  I'm sorry to hear that your printer does not recognize the black cartridge, and I am happy to help you solve this problem!

  Are getting you any kind of error message about the cartridge? If this is the case, please follow this ink cartridge problem: "Not compatible ink cartridge" or "Ink cartridge must be replaced" message for HP Deskjet 3520 e-all-in-one and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series document and, hopefully, the printer will recognize the cartridge after these steps.

  Maybe that's not the question if you thinking maybe that black ink is not printing? If this is the case, please try these steps printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series for a possible solution

  I would like to know if these steps help and what happens after trying them and I hope that we can get things working for you!

• HP deskjet 3520 software series does not start

  After installing software for my Deskjet 3522 base, the program does not start. He did start on my first install but stop working after a while. Maybe after some updated. Now I reinstalled but still does not, not fromm the shortcut on the desktop or the start menu.

  Cordially Leifs1

  Hello Leifs1

  I suggest copy and paste this link in the browser. Download and install: ftp://ftp.hp. Com/pub/printers/sclitefileassociation/SCLiteFix_299026 .exe

• HP Deskjet 2540: The printer does not work.

  My printer does not print the page, I am sinking.  Instead it tries to download a page that I tried to download a few days ago and he has yet to recognize the page.  It was an image of the Liberty Bell, so I assumed it was copyrighted and would allow me to print and I rejected the page.  Apparently he is stuck somewhere in the printer and it does not load and therefore does not allow me to print the page that I need now.  How can I get this thing off my storage or my printer?  I watched everything I know to review and check in the printer itself.  I do not know how to remove the application printing the page because I can't find in the computer anywhere.

  If you can help me, I would be very grateful

  Thank you

  Linda Schwartz

  Hi @lindaschwartz,

  Thank you for joining the HP Forums!

  I noticed your post on how you can not print with your printer HP Deskjet 2540. I'm happy to help you!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will solve your problem!

• HP deskjet 3520: black ink does not print

  My HP deskjet printer that is 2 months warranty, that I recently bought a new HP cartridges for now will not print black (other colors are all very well).
  If have spent hours and hours trying to solve this problem, following all the advice on this forum - believe me, I tried to clean the vent system, cleaning of the print head. The really frustrating thing I had just bought new ink for the machine $60 thrown and now my printer does not print. I'm out $60 and I need to buy a new machine very frustrating and this machine is used very little only occasionally to print some checks and a few emails.

  I promise you that this HP will not be my next choice.

  Tammy

  The message here suggests to call HP Support even if your printer is no longer under warranty if the standard troublehsooting steps do not resolve not black not print on your Deskjet 3520.

  If you are in the USA call 1-800-HPINVENt or Canada, also see details here.

• DeskJet D2330 - powered but does not print

  Hello...

  My Deskjet D2330 worked fine yesterday. When I tried to print today, the green power light was turned off

  and do not print. I checked all the strings to ensure that they were not in bulk.

  I turned the main power on and outside... nothing. I have enough ink and paper.

  And the cartridge, although it is easy to move by hand, does not reset when I turned on the power.

  Do you think he burned?

  OR?

  Thanks for your help.

  Hello again, xxyyzz,

  I'm sorry to hear that your printer is now show 'offline' and you cannot print. I have the instructions step by step you requested below. You will need to select your operating system first to start.

  I hope this helps!

  "Printer is off-line" Message appears on the computer and the printer does not print

• DeskJet 970Cxi impressions eject does not correctly

  He pushes paper most of the exit door, so that the printer considers that it has finished and starts printing the next sheet.  But sheet n ° 1 is not far enough to lie flat on the output tray, so something in the works mechanical grabs the back of it and snarls to the top of the next sheet as well.  And so on, so I have to look at the printer like a Hawk and whisk every leaf there at the right time precisely.

  I hear fairly well with mechanical things and feel that it should be simple to put it right, if only I could observe.  But everything happens too fast, in more of course, it will not be printed with the cover open.  The only clue I can see is that the main action of the spin is on one side.

  Everything by moving the printer a year or two before, I made the mistake of putting on his side briefly.  It is the only cause I can think of, although it doesn't seem to affect his performance (once I had cleaned the ink off everything!).  Recently started paper supply problem.

  I bought a new printer to use when I need high quality images, as I work with them and need the settings that the printer Deskjet does not more (as I now have Vista).  But I do a lot of writing too and hoped to operate using my Deskjet nice, reliable as a workhorse for the text (and images of basic, every day).

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• StartScen.bat does not

  Hello

  (11.1.1.5.0)

  I'm trying to run a startscen.bat ODI interface, but its does not work.

  No error is reported, no work appears in the operator and the calling batch file closes abruptly.

  This is my calling batch file script:

  SET BIN=D:\Oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\bin

  D:

  CD BIN %

  SCENARIONAME 001 Development 5 %bin%\startscen.bat > D:\trace_SCENARIO_NAME.log

  Here is the result in the journal:

  OracleDI: From scenario COPYCELLDETAILS 001 context development...

  And here is the script of the Startscen.bat itself:

  off @echo
  setlocal
  "for %%d in ("/ help"" / help ""-HELP ""-help "" "" ") If %%d ==" % 1 "goto HELPTEXT
  GoTo STARTCOMMAND

  : HELPTEXT
  echo.
  (c) Copyright Oracle of the echo.  All rights reserved.
  echo.
  echo PRODUCT
  echo Oracle Data Integrator
  echo.
  echo FILENAME
  echo startscen.bat
  echo.
  echo DESCRIPTION
  echo start a scenario. See the Oracle Data Integrator documentation for details
  syntax of the echo.
  echo.
  echo SYNTAX
  echo startscen ^ < name ^ > ^ < version ^ > ^ < context_code ^ > [^ < log_level ^ >] ["-SESSION_NAME = < session_name >"] ["-mots-cles = < keywords >"] ["-AGENT_URL = < agent_url >"] ["-NAME = < agent_name >"] ["" < variable > = < value > ""] *.
  echo.
  prerequisites of echo
  The REPOSITORY section of odiparams.bat CONNECTION INFORMATION should be the echo
  echo completed before running this script.
  echo.
  GoTo FINCOMMANDE

  : STARTCOMMAND
  If "% ODI_HOME" == "" set ODI_HOME =...
  Call "% ODI_HOME%\bin\odiparams.bat".

  echo OracleDI: from scenario %1 %2 %3 context...

  % ODI_JAVA_START0% - classpath '% ODI_CLASSPATH %' oracle.odi.StartScen % *.

  : FINCOMMANDE

  Seems to fall down around the second last line, but I don't know what to do about this.

  I would appreciate a little nudge in the right direction

  See you soon

  Hi Phanikanth

  It turns out my problem was simpler than the environment variables.  The context seems to be case sensitive. He accepted the context code 'DEVELOPMENT', while I had entered in the name of the context of 'development '.

  Thank you