Similar Questions

• Card problem OBIEE - points on the map illustrated with two different images.

  VI have obiee 11.1.1.7.1 where we have an analysis with a card.

  The base map and the theme is created in 11.1.1.7.3 mapbuilder.

  VI have a variable shape layer in the OBIEE plan. The shape is a circle, and has four different locations (using four different colors to show the differences).

  A query can show 20-30 positions on the map.

  So far so good.

  When we run the analysis, the following occurs:

  1. circles of 20-30 (with one of four different colors) are presented correctly on the map. These results appear directly on the map once we click on "Apply"

  2 an hourglass appears and we will have to wait for 20 to 60 seconds.

  3 then an "x" appears in each of the 20-30 circles and the hourglass disappears. The 'x' is the mapbuilder theme that we created if we do not have any Style 'Render' associated with the Style. If we have a rendering style, for example a simple small point, this point then appears with the circle.

  Our question is how we can force mapbuilder for not making the 'x' in the map. That's where we get terrible response time.

  
  

  Best regards

  Joel
  

  We have solved the problem using only the datawharehouse data to generate BI data layers.

  We have created a new BI data layers using variable forms. Then, we chose a layer of bridge custom rather than use the MapBuilder theme that we created earlier. Then, we used the points Long/Lat for the generation x and y.

• Graphic problem OBIEE

  Hi friends,
  
  I use Obiee 10 g.
  
  I have a report with the name of Department of 2 columns, right. employees.
  
  50 HR
  100 Admin
  4 science
  40 computers
  Test 2
  
  Data type for no.. employees - number.
  
  
  I want to delete the values that are less than 5, i.e. I want to show them that the of '.
  So, I used the cast function and with the help of a case statement - I was able to demonstrate the following.
  
  Case report: cases where table.no_of_employees > 5 then cast (table.no_of_employees as char) else ' end.
  
  50 HR
  100 Admin
  Science S
  40 computers
  S test
  
  But, now, I want to display the chart of "Horizontal Bar" Microsoft graph chart.
  When I try to create a black and white, no graphics department name. employees - I get the following error
  
  Aggregate with encountered non-digital storage (check the formula column)
  Error details
  Error codes: Y4FOJM42
  
  How can I get a chart?

  Hello

  You should not built the report with the column to which you've changed from ' given that the graph can be established with numeric values.
  Try to create a new column with the same column that you modified as ', but without the ' change.
  Here instead of the of ' displayed as 0. Then, in the graph, use the new column, and a graphic will appear, but the chart will display 0 value for this column.

  Hope this helped / answered.

  Concerning
  Young

• Gauge problem

  ADF 11
  Hello
  
  I have a table where each row should represent 1 gauge.
  
  The row contains a column for the maximum value, the current value, threshold 1 and threshold 2.
  
  If I drag and move the data from the table of control on a page and create a simple gauge in the gauge data is correct but that a single gauge appears for the first line of the table instead of a caliber per table row.
  
  A set of gauge seems to be for when all the lines share the same thresholds which is not my case.
  
  How can I display each line of the table as a gauge on the same page.
  
  Concerning
  Paul

  You can use the existing table and add a gauge inside of an af:column by adding the new column to the table.
  I don't know how you can generate n number of gauges outside the table (unless you use tags forEach or iterator)

  Jean Lou

• 5s iPhone battery drain problem

  Hello guys, I'm new to the forum and I am looking for a possible answer to my problem:

  The problem started a few weeks back, maybe 2 months. I have recharge my phone one day and it was fine until that later in the day, my battery went down so quick unbelievabl, I thought maybe it's just a temporary problem, so I decided to hard reboot my phone, home and button on/standby, of course. I turned it on and the battery percentage was different, and every time that I turned it works again the battery percentage would be different, strange. So I decided to replace the battery (since the phone was bought on eBay, but it was fine until December of may last year). So I replaced the battery but the same thing was going on, and while this has happened my charging port began to act up, although it has not been damaged at all, he would not accept the same lightning ungenuine apple cable. I got 2 of the same ones and one of them could work and the other not. I decided to change the port of loading, which resulted in not accepting any Apple ungenuine cable which forced me to buy an original, and it works very well (but for my friends iPhone 6 the ungenuine work well). In any case to the problem, I replaced the battery still now to a new Apple true battery which the guy assured me was genuine, it was substitute. If the problem persists, last night I left my phone at 70 percent to see if it lasts, and no, there not good that it should be at least 30/40%, yet I remember if I left my phone in the as 90% I could wake up and see it would still look like 75/80%. I tried to restore through iTunes but I have always used my backup to restore what could be the problem, my keychain is off. I have not tried restoring the fees without restore back upward, I would rather ask here because someone may know the answer to that.

  PS My phone gets very hot when I charge it and when the 3G, sometimes very hot.

  Thanks in advance.

  Phew, eBay phones are difficult because they have this unknown history.  You can have more than one thing going on, so let's try to clear up this problem a little bit and get you some tips.

  1 - the battery.  Replacement batteries that do not exist outside of Apple have a very variable quality.  I would be very suspicious of a battery that was sold by someone who claims that he was "authentic Apple" because it is obviously not possible.  People who are not further about this tend to be a bit scammy.

  2 - gas gauge problem.   Turn off the phone and see a percentage point of different battery to a gas indicator problem.  This has two causes.  Bad battery and filter missing to the Board of Directors on the measurement of gas line.  Since you have experience gas gauge defect with several batteries (but of questionable quality) your problem may be the filter gas gauge.  This filter is usually damaged or 1 - technician damage (struck off the Board) or 2 - water damage.   Could be the case here.

  3 - chip of Tristar problem.  Don't Fake charge, no charge, no usb detection and especially - distress recognizing different usb cables can point to a defect of the Tristar chip on the logic board.  This chip is very sensitive to the use of non-Apple charger.  Your statement "forced me to buy an original cable" would put a Tristar (also known under the name of U2 chip) problem at the top of my list of suspects for this phone.

  4. "old" water damage.  Heat = short in the phone. While a bad Tristar chip may cause the phone to run hot, it is also possible that injury inadequately treated water may be the cause of a partial short circuit in your phone.  A short stop the battery very quickly.

  So what to do now?  Your phone has a complex presentation and my advice is that you really need to have seen by someone who is capable of dealing with issues of Board level on iPhones.  Call your local independent repair shops and talk to them.  Find one with good reviews, which will guarantee their work, and who will not charge you to look at this forum.   You need someone who is capable of repair at Council level - aka not the guys at the Mall.

  Good luck!

• Space in OBIEE/Teradata spool error

  OBIEE 11 g
  
  I am reporting in OBIEE off a Teradata with a very high volume of records per table IE 300 million records per table. My reports constantly encounter an error 'no spool space' opposite end. How can I solve this. Thanks in advance.

  Hope this helps: http://kedar.nitty-witty.com/blog/no-more-spool-space-teradata-query-solution

  Seems to be a database problem and not a problem OBIEE.

  Please check if useful/correct.

• Problem updating a table of clusters that contain some gauges

  Hello

  I have problems when I write to an array of clusters that contain some gauges.

  I wrote an example program to illustrate the problem.

  [I create a digital, digital picture].

  I have complete 4 elements of the array with the data.

  If I shoot each element with a function Index Array and write the data in 4 indicator groups independently, I have no problem.

  If I have the wiring of the table of 4 elements in an array of clusters, the needles on the gauges redraw correctly.

  However, simply by moving the mouse on the element table causes the display to redraw this element.

  I played a bit with synchronous display and reporter Panel updates, but they do not seem to affect this behavior.

  Any thoughts?

  A picture of the problem and the VI are attached.

  When something like this pops up I usually try covering the incriminated with a transparent 2D image control.  Controls overlapping sometimes cause problems, sometimes they solve them.

• Autoset problem limits max gauge scale Custom

  I build a VI in which gauge ramp behave as a gauge needle i.e I plan to ramp change dynamically with changin values. I did a VI exactly like that and is the only problem that I face is I need the scale of the gauge from 0 to 6000, but when I run the Vi max sets to 1599 is automatically resized... I don't get what exactly I am missing work is why this problem is coming...... need help I enclose my VI here for your reference.

  johnsold thank you for your response...

  Well, I managed to find my mistake... ... the bug in who is using 'Scale.Marker [] values' we create markers in the balance and the number of markers that can be created is limited to 1600, because I think that so... thats why it always shows the marker 1599 e all markers above 1599 goes beyond the beach that is why we are able to see the markers above 1599 nt... I did work in other ways... thnks anyway for your answer...

• T410 - problem with the gauge of power management (it will not change)

  Hello world

  on my T410 2522-EM1 gauge of management of power supply in the taskbar disappeared originally. After you download and install the latest version of the management of the power supply (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70601) and (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4GXPEG) gauge power management driver was back again. But after a while, I noticed that the gauge displays the actual battery charge but showed the load that the battery had started. In the power management utility, the correct values are displayed. I am absolutely no idea on how this could be. I tried to reinstall it, but it doesn't seem to work.

  Everybody suffers the same problems?

  Q - Ball wrote:
  Showed... load it?

  Who are you talking about? Are you talking about the time it will take for the battery to run down, or the percentage of the life he left behind?

  ...

  It depended on whether the laptop was pluged to the start (battery mode it displays the time and with the plug pluged it shows the percentage)

  What I have now is to uninstall everything and after I installed version 3.31... It seems to work.

• OBIEE 11 g gauge empty

  Hi all

  Version -Oracle Business Intelligence Product Version 11.1.1.7.150120 (150111.1659 64-bit Build)

  Our report OBIEE gauge is empty all of a sudden with the same threshold/formulas as in the dev environment.

  I checked all the formulas. Everything is exactly the same in dev/uat. What could be the reasons for the gauge UAT empty?

  

  UAT:

  

  Thank you

  R

  Thank you. ! I solved my self. background color on the back should be white.

• Connect OBIEE Admintool to hive: problems with ODBC. Any option?

  We are facing a blocking problem when you try to connect to an instance of hive Admintool using an ODBC driver.

  For a CEP, we are trying to set up a domain of hive to analyze in OBIEE. Everything seems to work OK

  until we try to load the metadata. In this case, the schema is found but not table under him. We can add the

  Physics of table by hand, and then we can successfully launch the number of lines. We then try to load the lines, but to

  the point that we have faced a strange behavior. But summarize the steps we have taken.

  (1) we downloaded ODBC drivers to connect to the hive (we tried with Hortonworks, Cloudera, Microsoft and)

  MapR, but the results are the same);

  (2) we have set up the connection to the hive on port 10000 and successfully run the ODBC test (BTW: to)

  SQLDeveloper we can connect to the same server via the JDBC driver and query the tables here);

  (3) then we start Admintool. Once we have defined the name and the password, we then select the ODBC connection.

  in fact there aren't strictly necessary user name and password, but we offer them anyway;

  (4) the next step is to load the metadata; and here is the first issue, because we can see the patterns but not

  the tables.

  

  (5) anyway we are going on and insert a schema (we read there could be problems with more than one schema, then)

  We simply select one); in a blog (by Rittman, who really is 'THE' guru OBIEE) it is said that the tables are not

  loading directly, so we tried simply adding a physical table in the physical layer as the default schema.

  making sure the table exists;

  (6) once we have added 'physically' table that we proceed with the number of lines; and we get correctly the number of

  ranks once we overview the name of table after that;

  (7) then we try to retrieve the lines and the question; We get the following error message:

  

  We also dug a bit little and concluded that the request received by hive instead of being

  SELECT * FROM trucks

  it becomes

  SELECT FROM trucks

  If the ' *' is passed to the SQL statement sent. If we run the same query on the Beehive, we get

  exactly the same exception ParseException error, it really seems that there is a problem in the

  construction of the SQL statement.

  Any idea about this problem? (if a fix exists, because after so many attempts, we are convinced

  This is a bug that can only be fixed by a new version of Admintool)

  BTW: we have tried almost all the possible options for the ODBC driver (such as 'native of use request',

  ("Use Unicode" and so on) and in regards to the Admintool, we have not seen what option

  or preferably (at the physical layer) can influence this anomaly.

  Any help is really, really appreciated. Thanks in advance.

  OK, I got what you're saying. I mean, to focus on the bigger picture. If you can make a data view or list Table to import metadata is a bit unrelated to the final goal. Annoying, but irrelevant. What you try to do, is get OBIEE to build queries dynamic SQL based on the logical requests which will submit your users via presentation against the presentation layer Services.

  Continue to build your SPR (ignorant that display data does not work) at a very simple level, with a single fact/Sun in the business model, single domain - and then run an appropriate query generated in answers through it. The point of all this is to see how OBIEE SQL query then generates, and if it's worth a one hive.

• OBIEE Gauge - how to limit the decimal values in the footer area?

  Hello

  Is anyone have an idea on limiting decimal values in the foot of the gauge? In fact, I want to display the value of line as well as the value of the measure in the foot. I tried round, truncate etc and none of them actually worked.

  Please suggest some ideas.

  OBIEE Version: 11.1.1.7.0

  

  

  Thank you and best regards,
  Clinton

  Hello

  try to use

  Substring (cast (10, 233' tank) OF 1 FOR cast (Locate (',', cast (10, 233' Char)) as int) + 1).

  Change '10 233' by your column formula

  Felipe Idalgo

• Problem with ATG OOTB reports using OBIEE 11 g

  Hello
  R. j. Nunes

  For OBIEE within the ATG OOTB reports, I am getting error with all analyses that have a view with queries below union lattice. Analysis such as product sales Top, Top product returns, key indicators traffic etc.

  Error during the generation of advertising. Error getting cursor in GenerateHead

  Error details

  Error codes: OAMP2OPY:E22KEPYE

  DXE compiler error. Nested aggregate expression is not allowed in the aggregate query. Source name: c465ddfed81c35fcc_X_leaf_1. «"XML: < sawxd:expr xmlns:sawxd="com.siebel.analytics.web/expressiondxe/v1.1 "xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance"xsi: type ="sawxd:aggregate1"op = 'first' > < sawxd:expr xmlns:sawq="com.siebel.analytics.web/querydxe/v1.1 "xsi: type ="sawq:field"pos ="12"/ > < / sawxd:expr > »»

  I tried to run the workaround mentioned in https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=450299094214827 & ID = 1467110.1

  but I still get the error.

  Anyone else facing a similar issue?

  ATG Version: 10.2

  OBIEE Version: 11.1.1.6.0

  Thanks, Saud

  Hi Saud

  You need to install

  11.1.1.6.2 BP1
  

  That should solve any problems you encounter.

  It is in fact support for ATG 10 version.

  ++++

  Thank you

  Gareth

  Please indicate any update as "Good response" or "Useful answer" If this update help and answers your question, so that others can identify the correct/good update between the many updates.

• Problem of the Essbase hierarchy in the physical layer of RPD (OBIEE 11 g).

  Hello

  I have a scenario that follows

  

  
  In the screenshot above, we are not able to get the data accounts, Gen1 and Gen2, levels of accounts (taking a measure). We get level 3. Gen1, accounts which the Member 'Accounts' and Gen2 level, accounts Member "ALL_ACCOUNTS". When I combine it with measure only displaying not of any value (possibly summary data). Please let me know/possible error correction must be done as soon as possible.

  Kind regards

  Chandra Khalil.

  Are OK, if you're new to essbase you sure that you are supposed to have values of measures in gen 1 and 2 of your account dimension?

  It is a common behavior to aggregate not always things to the top of the dimension if it does not make sense from a functional point of view.

  It does not shock me for not having values for members 'Accounts' and 'ALL_ACCOUNTS' because in general you can not always aggregate accounts together.

  You can also get the products OBIEE physical query (MDX) in the same way that you get any physical motion in OBIEE and run directly against Essbase (or ask support Essbase guys for this) and validate it returns nothing, and there is a problem in the application itself.

• Problem with installation on Redhat Linux 6.5 OBIEE 11.1.1.7/11.1.1.6

  Hello

  I tried to install OBIEE 11.1.1.7 / 11.1.1.6 (tried both versions) Redhat linux 6.5. But the prior step fails with the message:

  Checking operating system certification:

  Expected result: a 6-oracle, oracle 5, 6, company - 5.4, company-4, company-5, redhat - 5.4, redhat-4, redhat-5, SuSE 10, SuSE 11

  Actual result: redhat-Red

  Verification: the result of this review is: failure of < < < <

  But WHEREAS, when we check the OBIEE compatibility matrix, cleary mentions the support of OBIEE 11 g with Redhat Linux 6 (level 1 + updated to date)

  When I tried to ignore this warning and proceed with the installation, during the configuration phase, Create Domain step breaks down and I'm not able to go further.

  Waiting for pointers to solve the problem.

  Thank you

  Saud

  Check this Doc ID 1438537.1