Impossible to get hardware information for selected machine (Ubuntu 64 physical)

Similar Questions

• Impossible to get hardware information for the selected computer - Standalone Converter 5.5.3

  Hello everyone!

  I wanted to reduce my DC scores (of 2 used only TB ~ 150 GB) with the help of the stand-alone converter, but when I select 'source machine' (my off DC), then click on next, I get the error "Unable to get material information for selected machine" (which runs the converter as admin doesn't help). Also i ' v tried to convert other machines on this host and succeed.

  Cannot understand what is wrong with my DC.

  ESXi 5.1.0

  Converter 5.5.3

  Newspapers of my 3 attempts as an attachment.

  Seems that the problem is the size of the disk, possibly existing snapshots. Try to convert the virtual machine as a machine (on) physical.

  HTH

• Impossible to get hardware information for the selected machine error

  Ok. I tried every version 4 (standalone) converter. XX to 5.0 with the same result. what I want to do is to convert a Win 2 k 8 R2 x 64 VMS residing on one of our ESXi servers.

  all I get is "[07240 error"wizardController"] can not query info source HW: vmodl.fault.SystemError" in the journal mistletoe converter.

  I tried all the stuff I found on the forums (cloning the VM, clean shutdown, change the version of the guest operating system,...) does not. I simply can't converter to work, regardless of the version.

  any ideas?

  Thank you

  Tom

  Is the ds3@vmdk03of your data store name? If Yes, try to remove ' @' data store name, and then the conversion.

• Impossible to get hardware information for the selected computer

  Hello world

  I need to convert a .vmx ESXi 5.5 machine. I use VMware vCenter Converter Standalone 5.1.1.

  I have this error: failed to get the hardware to the computer information selected

  
  

  Before copying the files (VMs), I stopped the VM and I did not include snapshots.

  Thanks for your help!

  Specific error should be found in the converter-worker newspaper, could you upload log-bundle?

  Also, you should make sure that the user running the user interface that has sufficient rights on your VM.

  HTH

• Convert VM residing on host to another host ESXi ESXi - impossible to get hardware information for the selected VM

  Hey guys,.

  I was wondering if someone came across this yet, but I amtrying to move a virtual machine to one ESXi server to another with converter. The virtual machine is powered OFF and when I select the virtual machine, and then click Next, I get this error "Unable to obtain information on material selected VM." I could always use FastScp but I want to resize the partition of hard drive on the virtual machine before I move it.

  Thank you!

  Hi Jonathan,.

  Can you send me the list of contents in "%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\logs"?  As you have noted that these services are running that they are very likely to produce newspapers in this directory.  Also can you send me the following files as it is possible that logging can be disabled in them:

  "%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\converter - server.xml" and "%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\converter - agent.xml.

  You can make sure that you connect to the server local converter by going in "Administration > to connect to another server...". "in the main window of the converter.  This is different to connect to the ESX Server.  Just to make sure that the flow is clear, when you go through the wizard, it communicates with the converter server to which you are connected.  The converter server will contact the appropriate converter officer who is responsible for the collection of information from the source and run the conversion.  In this case, the appropriate converter agent is one running on the local computer. This converter agent then connects to the esx server you specified in the wizard to get the necessary information machine.

  -Ryan

• "Impossible to get hardware information for the selected computer." OV V2V conversion error

  Hello

  I'm trying to convert Windows 2008 32 bit VM of VServer to ESXi 5.1 s. He always of errors with the message above. I tried to use VmWare Converter 5.1, 5.01 and 4.3.  4.3 using I get another (I get a "a general error has occurred: failure" when I click on the Finish button.)  I got the converter 5.1 work with s 2003 32-bit OS I had.

  Some things I've tried:

  -Changed type VM from 2008 to 2003

  -Powered the machine up, then shut down cleanly

  -Do of course, there is nothing wrong with configuration that could hang up the conversion as the map NETWORK configurations, etc.

  I have really no idea what to do at this point.  I tried all the solutions and workaround that I found through Google and nothing seems to work. Not really sure where to go from here.  Anyone out there have anything that has worked for them?

  Thank you

  Adam

  The error is:

  2013 06-13 T 21: 00:17.676 - 04:00 [02940 info "Default"] analysis \\stam-vm01\Virtual Machines\stam-wsus03.janus\Windows Server 2008 Enterprise.vmx

  2013 06-13 T 21: 00:19.348 - 04:00 [02940 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with "the specified virtual disk must be repaired" (error code: 14)

  2013 06-13 T 21: 00:19.348 - 04:00 [02940 info "Default"] error 14 opening disk \\stam-vm01\Virtual Machines\stam-wsus03.janus\Windows Server 2008 Enterprise.vmdk.

  As I recall there is a problem with Server2 with clean shutdown. As you say that you did a clean shutdown, try to delete additional files (lock) from the folder of the virtual computer.

  The VDDK tools or download invoke vmware - vdiskmanager.exe with the - R option.

  HTH

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• Another problem "impossible to get hardware information...". »

  Just installed Converter 5.0 on 64-bit Windows 7 computer. You want to virtualize the machine using only the C: volume.

  Run converter and immediately got this error when I chose the machine running as a source.

  Attached are logs that I could find, including the last two newspapers of hardworking service.

  Can anyone help?

  Hello

  Newspapers of worker seem strange. They both stop suddenly after

  2013-09 - T 06, 20: 46:31.559 - 04:00 [info 04168 'Default'] [PopulateVolumeProperties] \\?\Volume{96d0b74a-f562-11e2-810a-005056c00008}\ volume is the name of the \Device\TrueCryptVolumeP device.

  2013-09 - T 06, 20: 46:31.562 - 04:00 [info 04168 'Default'] [GetDriveLetterOrMountPoint] Mount point of volume \\?\Volume{96d0b74a-f562-11e2-810a-005056c00008}\ is P:

  It looks like an accident of service. Can you check if this is the case? (for example in Event Viewer). If so, I would say that you assign the level of detail record (see VMware KB: increase the logging levels to verbose for vCenter Converter application components) and fix the new log again for further investigations.

  The P: volume seems to be encrypted ("is the name of the \Device\TrueCryptVolumeP device"). Maybe there is something specific in what has cause the service down?

  Alternatively, you can try bring this volume offline drive (if possible), and then try to restart conversion. But even if this work around is successful, I would still ask the detailed log to investigate the accident.

  Kind regards

  Plamen

• P2V to the local computer - error failed to get hardware information

  Hello

  I get an error using vCenter Converter Standalone 5.1.0. I'm trying to convert a local computer to an image on a hard drive external. The local computer is Windows 7.

  The error I get is impossible to get the hardware information for the selected computer.

  Here are the steps I am following

  Select the source type: slot machine tension

  specify the machine: this local machine

  Thanks for any help

  It seems that there is a problem with your volume K:. What is it? Is there a chance to detach or make offline and try again?

• Impossible to get 'notes' of the virtual machine

  I tried to use a powershell script to get information from the virtual machine. I can get VMHost, VMname and GuestVersion using the script in the following, but failed to get the notes of the virtual machine. Anyone know why I can't get notes, please help me with that. Thank you in advance.

  report = @)
  foreach ($vmView in (Get-View - ViewType VirtualMachine))
  {
  $report += $vmView. Select-Object @{Name = "$vmhost"; Expression = {($vmView.Runtime.Host Get-View).} Name}},
  @{Name = "VMName"; Expression = {$_.} Name}},
  @{Name = 'Notes'; Expression = {$_.} Description}},

  @{Name = "GuestVersion"; {Expression = {$vmView.Guest.GuestFullName}}
  }
  $report | Sort-Object VMName-descending | Export-Csv "d:\vm_GuestVersion.csv" - NoTypeInformation

  There is no need to do it with the cmdlet Get-View.

  You can do

  $report = @()foreach ($vm in Get-VM){    $report += $vm | `        Select-Object @{Name="VMHost"; Expression={($_.Host).Name}},            @{Name="VMName"; Expression={$_.Name}},            @{Name="Notes"; Expression={$_.Description}},            @{Name="GuestVersion"; Expression={$_.Guest.OSFullName}}}$report | Sort-Object VMName -Descending | Export-Csv "d:\vm_GuestVersion.csv" -NoTypeInformation
  

  If you want to do with the cmdlet Get-View for any reason, you can do

  $report = @()
  foreach ($vmView in (Get-View -ViewType VirtualMachine))
  {
      $report += $vmView | `        Select-Object @{Name="VMHost"; Expression={(Get-View $vmView.Runtime.Host).Name}},
              @{Name="VMName"; Expression={$_.Name}},
              @{Name="Notes"; Expression={$_.Config.Annotation}},
              @{Name="GuestVersion"; Expression={$vmView.Guest.GuestFullName}}
  }
  $report | Sort-Object VMName -Descending | Export-Csv "d:\vm_GuestVersion.csv" -NoTypeInformation
  

  But note that as you need a view of the GET each time for the host name, performance will suffer.

• P2V failed to get the hardware information for the selected computer

  Hi all!

  I am (for the first time) doing a P2V conversion.

  
  The target computer is a remote SBS2008.

  I have installed the local vCenter Converter Client 5.1 on my laptop

  I installed the agent (found in the installation on my laptop directory) on the remote server.

  I opened the ports that I found on the website of vmware in the firewall of remote sites (8089, 139, 445, 9090, 137 and 138)

  When I enter the connection details in the converter I receive the SSL certificate pop-up (so there is an established connection), but when I click on 'ignore' it just presents me: "Unable to obtain material information to the computer selected."

  I've been looking around for some howto or extra info but he had a hard time finding ;-)

  Thank you very much for the comments!

  When you launch VMware Converter, do my right clicking on the program icon and selecting "Run As Administrator".

• vCenter Converter Standalone5.0: failed to get hardware information

  I'm trying to convert virtual macines of ESX3.0.2 to ESX5i.

  I have connected an ESX Server, then I selected a virtual machine.

  The message "Unable to obtain material information to the computer selected" came out.

  In the converter-gui - 29.log a message, ' error fetch /sdk/vimServiceVersions.xml: 404 (not found) "was found.

  It is a part of the newspaper.

  2012 03-24 T 18: 30:13.432 + 09:00 [06492 verbose "ManagedMachineDataConnectionLogger"] connection VIM to ap74071.ad.ogawa.net...
  2012 03-24 T 18: 30:13.432 + 09:00 [06492 info "ManagedMachineDataConnectionLogger"] connection to the host on port 443 ap74071.ad.xxxx.net
  2012 03-24 T 18: 30:13.432 + 09:00 [06492 info "ManagedMachineDataConnectionLogger"] at localVersion is: vim.version.version7
  2012 03-24 T 18: /sdk/vimServiceVersions.xml pick up 30:13.438 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimXml] error: 404 (not found)
  2012 03-24 T 18: 30:13.438 + 09:00 [warning 06492 "Default"] processing response closing in unexpected state: 3
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 info "ManagedMachineDataConnectionLogger"] remote version is: vim.version.version1
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimApi] control whether vim.version.version1 is compatible with vim.version.version7
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimApi] control whether vim.version.version1 is compatible with vim.version.version6
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimApi] control whether vim.version.version1 is compatible with vim.version.version5
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimApi] control whether vim.version.version1 is compatible with vim.version.version4
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimApi] control whether vim.version.version1 is compatible with vim.version.version3
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimApi] control whether vim.version.version1 is compatible with vim.version.version2
  2012 03-24 T 18: 30:13.444 + 09:00 [06492 verbose 'ManagedMachineDataConnectionLogger'] [VimApi] control whether vim.version.version1 is compatible with vim.version.version1
  2012 03-24 T 18: 30:13.521 + 09:00 [06492 info "ManagedMachineDataConnectionLogger"] root user authentication
  2012 03-24 T 18: 30:13.521 + 09:00 [06492 verbose "HttpConnectionPool"] created HttpConnectionPoolImpl. maxPoolConnections = 1; idleTimeout = 900000000; maxOpenConnections = 1; maxConnectionAge = 0
  2012 03-24 T 18: 30:13.528 + 09:00 [03428 verbose ' vmomi.soapStub [3]'] the initial status of service request failed, disable pings. error = HTTP Status: 404 "not found".
  2012 03-24 T 18: 30:13.528 + 09:00 [warning 03428 "Default"] processing response closing in unexpected state: 3
  2012 03-24 T 18: 30:15.111 + 09:00 [06492 error 'wizardController'] can't question info source HW: vmodl.fault.SystemError
  2012 03-24 T 18: 30:51.999 + 09:00 [info 04084 'ConverterSession"] data created converter provider.
  2012 03-24 T 18: 30:51.999 + 09:00 [info 04084 'DiagnosticDataProvider'] Converter::Client:Gui:Common:DiagnosticDataProvider:DownloadSourceDiagnosticFile - by using the last known source computer specifications:
  -> (converter.ComputerSpec) {}
  -> dynamicType = < unset >
  -> location = {(converter.ComputerSpec.ManagedVmLocation)
  -> dynamicType = < unset >
  -> vimConnect = (converter. VimConnectionSpec) {}
  -> dynamicType = < unset >
  -> hostname = "ap74071.ad.ogawa.net."
  -> port = < unset >
  -> credentials = (converter. VimConnectionSpec.LoginVimCredentials) {}
  -> dynamicType = < unset >
  -> username = "root."
  -> password = (not shown),
  -->          },
  -> verifyPeer = true,
  -> sslThumbprint = "94:0F:DD:47:EA:36:26:35:A3:05:68:0 A: D1: DA: 4 C: A9:F2:BA:C8:42."
  -->       },
  -> vm = < unset >
  --> uuid = < unset >
  -> vmName = < unset >
  -->    },
  ->}
  2012 03-24 T 18: 30:53.044 + 09:00 [info 04084 'DiagnosticDataProvider'] Converter::Client:Gui:Common:DiagnosticDataProvider:DownloadSourceDiagnosticFile - received the packet of information (converter. DiagnosticManager.TaskLogBundleInfo) {}
  -> dynamicType = < unset >
  -> key = ' server-diag-20120324093052 - mqjids.zip. "
  -> timeCreated = ' 2012-03 - 24 T 09: 30:52.03043Z.
  -> format = "zip."
  -> content = (converter. [DiagnosticManager.BundleContent)
  -> 'serverLogs. "
  -> 'workerLogs '.
  -->    ],
  -> size = 214603.
  -> crc = 856352806,
  ->}

  Operating system of the target virtual machine is windows2003SP2 Japanese version.

  The VMware Server is version3.0.2 ESX.

  Does anyone know the solution to this problem?

  You need to disable SSL for NFC with ESX 3.0, see here: https://www.vmware.com/support/converter/doc/conv_sa_50_rel_notes.html

• How to get hardware information to download the correct drivers?

  Hello

  I just installed Win7 on a T61. Most of the equipment works with the generic Windows drivers. For the rest, the Lenovo system update tool was very useful. I can nothing but recommend.

  However, Windows Media Player will not play DVD and request to update the graphic card driver display analog copy protection. The graphics card has been identified by windows as standard VGA graphics card. In the "Downloads & drivers" section of your site web, several drivers for several graphic cards/chipsets are available for my family/model/Type of T61 (btw, none for Win 7 but I would like to try Win Vista instead, don't you think that these work too?). I realized to a chip NVidia or Intel PM965 according to the manual of Maintenance of equipment for T61 15.4 "screens, correct?

  But how can I get information on what graphics card or chipset running my video of the Thinkpad?

  Thank you

  Ralph

  Problem solved ;-)

  For anyone else with similar problems: simply enter the brand, family, Type, model information in the "Important information" section and you will be rewarded by a box titled original installation.

  See you soon,.

  Ralph

• Impossible to get analytical information and/or perform a data load: the 0 dimension is not valid

  Hello

  I am trying to load the first set of PSPB files using import data

  Header is:

  Budget item, Cube name of loading data, view FTES, proposed, FTE Start Date, end Date of the FTE

  And the first row of data:

  < LINEITEM ("EPT and powers of the State"), > PlanHR, 'BegBalance, Budget, Base, any year, vacancy, unspecified, U09999, POS099999', 1, 01/01/1951,.

  I get the following error when posting:

  The 0 dimension is not valid

  
  

  In addition, the dimension of the office's budget item

  and size of the drivers of accounts with members proposed FTE FTE Start Date, end Date of the selected FTE.

  Cannot find the error, please help.

  Thank you

  Just to let you know, part of the hierarchy of the dimension entity has been marked as invalid for the main Type of Plan. So that's what was causing the error.

• Get-stat - disk for virtual machines on NFS data warehouses

  Hi all

  Through work for VMs on NFS data warehouses get-stat-disc?

  $myVM | Get-stat - disc

  Doesn't seem to work for VMs on NFS data warehouses, but that works for VMs on VMFS data warehouses.

  After a presentation of VMware to http://webcache.googleusercontent.com/search?q=cache:h78Db7LqHcwJ:www.slideshare.net/vmwarecarter/powercli-workshop+%2Bget-stat+%2Bnfs & cd = 2 & hl = in & ct = Europeans & gl = at the & source = www.google.com.au

  «WARNING: NFS performance statistics are not available (to come in a future version of vSphere).»

  When these statistics are available for NFS data storage?

  Kind regards

  marc0

  The answer is in the property of instance data that Get-Stat returns.

  (1) get-Stat ==> canonical name of the LUN on which disk the hard

  (2) get-Stat virtualdisk ==> The SCSI id of the virtual disk inside the VM

  (3) get-Stat data store ==> the name of the data store

  (1) you give statistics for view virtual machine i/o activity starting from the LUN. For a VM with several virtual disks on the same data store, this will display the total IO statistics. And it will also include i/o generated by another VM on the LUN as swap, Flash files related...

  (2) gives statistics for 1 specific virtual disk of your virtual machine

  (3) statistics of e/s of your VM to a specific data store. Interesting when you have a store of data with multiple extensions (multiple LUNS)

  I hope that clarifies it a bit.