Gel fix unexplained and inaccessible?

Similar Questions

• HP TouchSmart 610 BIOS, all elements are gray and inaccessible?

  Hello

  HP TouchSmart 610-1010sc

  BIOS HP version 6.09 (FRIEND BIOS 2.6 x)

  I am able to get into the BIOS with F10, but every time he asks: ' "user CURRENT password:".

  When I type the password (empty) computer gives 2 long beeps and it enters BIOS.

  But the PROBLEM is that all the elements are disabled...

  Which means that all the items are grayed. If I look at the instructions of the BIOS (HP bios for motherboard F01 settings) there are many editable parameters (BLUE) as boot disks, lan onboar elements, load default configuration etc.

  But in my computer, everything is visible, but GRAY and inaccessible. I can't access or modify anything even not "Load setup defaults". Only active items are "Exit ignorant changes" and "Exit save changes."

  What's not here?

  How can I access BIOS so that I can change the settings normally?

  Finally the BIOS and boot LOGO obtained works!

  I noticed that, after CMOS, reset all the product data in the SYSTEM IDs inside the HP BIOS section me wiped out.

  So I had to enter my BIOS by CTRL + F10 instead of normal F10, so that the ID SYSTEM fields are editable.

  Then just re-typed all the information of two stickers found the back of the computer.

  First content SERIES only and PART SKU No.. Second was BUILD ID, BYTES and NAME OF THE PRODUCT FUNCTIONALITY.

  NOTICE! Note that you can type BYTES of FUNCTIONALITY that once, when recording it will be grayed out out/no editable.

  After saving these changes to the BIOS and restart the computer, the LOGO is the settings the computer BIOS and fully accessible back once more

• MacBook Pro does not gel (Apple logo and turn the wheel)

  Hey guys I have a Mid 2009 Macbook pro 17 "and it will not turn it freezes on the spinning wheel and I sometimes get a black or gray screen. and sometimes the changes to blue for a quick 2 seconds then back to gray

  I tried many things

  SMC - Reset

  -Check and restore disk

  -Repair disk permissions - at one point he said there is a mistake and I had to repair disc I fixed it and the problem continues to persist

  -Tried to start in SafeMode but does not (same problem apple logo and freezing wheel spinner)

  -Reinstall OS x into recovery mode - no luck

  -Test LANDAU - no luck

  -Mac restore to previous state - including all saved backups stays so just looking for previous screen of backups

  Any help is much appreciated, thank you!

  What exactly happens when you reinstall OSX via recovery?

  It does not appear to complete successfully?

  Try to repair the disk again. Report any error. Also in disk utility SMART status is listed as verified?

• My DVD containing all my music has become corrupted and inaccessible, I can save?

  It was about half full, I transferred (or attempted) of my hard drive.  When I then tried to use the DVD, again showed as being only half full, but is not available to show what is on it, or to play music.

  Hi Anne,.

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that music on DVD damaged and inaccessible.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  1. what version of Windows is installed on the computer?

  2. what happens when you try to access the music?

  3. do you get an error message?

  4 have you checked the DVD in another computer?

  5 have have there been recent changes made on the computer before the show?

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• The error that says that I have not installed hard drive when I start the computer. Also, when I clicked on my D drive, he told me to the disc is damaged and inaccessible

  Original title:

  When I start my computer, a message on the screen says I have no hard drive installed. my computer will load eventually after many attempts and when I clicked on my D drive, where all recovery files are kept, it tells me that the disc is damaged and inaccessible.  Can someone help me before I'm locked out of the computer for good?  Thanks in advance Andy D.

  Determine the manufacturer of HD computer. Go to the manufacturer's website and download their software/utility to check the Dowload HD it and burn it to CD or DVD according to the instructions. Boot from the disc newly manufactured. Run the utility to verify. If necessary, replace the HD and restore backups.

  Tom Ferguson

• What is windows error 0 x 80092003 fix it.and how can I get rid of him.

  Impossible to use my windows fix, error ox80092003 memory to come up.a problem is to prevent starting.how thetroubleshooting clean it helps lift.

  Hello

  If please see this thread and follow the instructions on the answer marked as answer.

  I hope this helps. Just reply to the results.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-0x80092003-while-using-fix-it-and-Error-5001/e1b46317-d4c7-402e-b447-6ee2994f52a2

• Windows 7-Vista 32 bit SP2 Build 6002 Windows Updates stopped at update. Usedboth fix - sound and now all the updates are missing.

  Windows Update error 80072EFE when trying to update. Last automatic update was on October 23 or 26. By default it difficult without help. Used aggressive fix - it and all updates disappeared and told Never to recent audits and never for the installed updates.  Proven Octobre23 system restore point. Then I cancelled because I don't think it worked. Is too long (still uncertain - had used before and it took a few minutes) attempted to close from start but just kept hanging and end the session had to be done when I pressed the button on the computer. I tried Windows Error Recovery, but he was able to start. Remove all installed programs of avant-trouble started (3 weeks) may not be updated on your site or start button. Message reads as follows: could not search for new updates. "Tried the safe mode. but do not understand it but computer shut down normally. I hope it's fixable, because I know very little. All above attempts wre taken Microsoft help site. Thank you..

  Betty,

  The utility TDSSKiller.exe supports 64-bit and 32-bit operating systems.

  Following the instructions on this site should help you

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller>

  A very short sweep but powerful rootkit detector

  Jose Antonio Ponton Posada CEO

• How to cancel "Make this folder private" when the check box is greyed out and inaccessible?

  I am running XP Home edition w/SP3.  I am the only user account so I should have administrator privileges, but when I try to cancel "Make this folder private" checkbox is greyed out and inaccessible.  I tried the solution of http://windowsxp.mvps.org/undoprivate.htm nothing works.  When I start safe mode and follow the instructions of the Security Watch tab the 'total control' checked but greyed out as boxes.  I try to get access to my home network.

  Pulling my hair out!

  Bart

  See if this helps: you can not select the Option "make this folder private"

• How will I know if my computers security has been breached? __my owner asked me for my email address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  Hé oddaz

  If you're really worried that your machine may have been compromised, try to back up your data, and then reinstall windows

  Walter, the time zone traveller

• Can someone tell me how to uninstall ms fix 50202 and 50195

  Can someone tell me how to uninstall ms fix 50202 and 50195

  Hello

  Microsoft Fix it is a troubleshooting utility that will not be installed on the computer. It is used as a diagnostic and troubleshooting tool. It runs once and try to solve the problem and cannot be uninstalled.

• Hibernate button disappeared; Microsoft Fix tool and manual correction do not work either

  Windows Vista Edition Home Premium 64.  Ran disk cleanup and the Hibernate option is now missing.  Microsoft fix tool and the command promt 'powercfg-h' or ' market / hibernate on "does not work either. Is there another way to restore the hibernation in the start menu option or something escapes me?  Thank you.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• With the help of Excel, the zero in front of the fixed phone and GSM disappears after moving to the next cell

  Make a list of phone numbers in excel. The zero in front of the fixed phone and GSM disappears after moving to the next cell. Any advice? Worked before excel on request, so the knowledge base only. Thank you. L. H.

  In addition to advice of GTS - NJ, who will work, you can put an apostrophe before the zero and it will cause zero to keep.   Instead of enter 0123, enter "0123.

• Why is the 'Documents and Settings' folder hidden and inaccessible?

  I used PC backup for backing up my XP files.  When I restore the files on my Windows 7 computer, I tried to bring it back to the "C:\Users\name\Desktop\test".  There is now a "Documents and Settings" folder hidden and inaccessible in my "C:\Users\name\Desktop\test".  How can I view/delete this folder?

  Short answer:  Because there isn't actually.  Please do not try to access it, you will help break your operating system if you try, and you will lose the ability to run several programs or worse.
  
  
  Why?  The tale:
  The Documents and Settings folder does not really exist in Windows 7.  This is only to fool the bad programs by redirecting to the right place (the Users folder).  Apparently he also deceived you.  It is not a real issue, do not try to access it.
  
  
  Or if you prefer, here's the long Version:
  First of all, the Documents and Settings folder came into existence in Windows 2000.  In order to shorten the path name (there is a limit to how many long letters we) as well as to create other languages of the operating system for use throughout the world, this folder has been renamed a few users in 2006 with the release of Windows Server and Windows Vista.
  Programs built the right way, that is not the real name or spelling (or language) of the book by fine user path, because they use the variable %UserProfile%.  However, many programs have been built the wrong way.  They are absolutely dependent on the existence of a folder called "Documents and Settings", spelled in English.  This program will crash if they do not find the file they want.  So to keep these plant program, Microsoft has created a record of false (called a junction Point) that redirects these programs on the folder of the user.  So if a program think he saved a file in c:\documents and settings\joe\desktop- the file will actually be saved to c:\users\joe\desktop.  The program never knows that he cheated.
  What you need to do:  Go to your Folder Options, tell him to Hide protected operating system files, and then use your computer normally.

• Table with fixed header and the left column

  I created a table in my application with the fixed left column (left most column is fixed and remaining columns are scrolling from left to right). is it possible to create a table with fixed position and fixed left column?

  Suppose there are 50 rows and 10 columns in my paintings, and only 3 columns and 15 rows are visiable on the screen

  (1) when the user scroll left to right left only most of the columns must be fixed. Remaining cap of the table and column scroll left to right and vice versa. also

  (2) when user scroll high high bottems single topic most must be fixed and remaining all lines (with to the left most column) should be scrollable.

  I am able to put in place a point at the top, but not both. Please suggest

  "If I repopulate the value in the cell when user scrolling, shell, I get scrolling effect correctly as it only shows half cell when the user highlight half of the cell."

  Approach using TablelayoutManager display single cells and scrolling would be cell at a time.  And Yes, you will need to override navigationMovement and n of methods appropriate TouchEvent your TableLayoutManager so that he knows when to fill the cells.

  Another alternative is to have four managers, we don't the the upper left corner (the dead angle), one to make the top row (column headings), one to make the left column (row headings), and the other to do the rest (data).  Place all these in a delicate header and line manager.  Only allow the user to scroll the data part.  Have the difficult Manager to listen the scroll events.  Then have the wily Manager add and remove the dummy column and header line managers as appropriate.  Note that these topic fields would not good passes, they would be either there or they would not be displayed. That would give you your 1/2 a scroll of the cell.  And you wouldn't have to substitute anything to detect movement, you would have left the listener do scrolling for you.

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.