General failure on Ping and TraceRT by WAN IP for 15 minutes after startup
My Windows 7 64 of Profession will expose this problem.
After startup, it cannot access anything whatsoever outside the local network. I can ping, DRC and usually access anything whatsoever on the local network, including the router. But trying to access what anyone outside the LAN does not work.
Ping Returns the Timeout on the first response, and then general of failure for the other three.
Tracert immediately returns a general failure
I am ping IP address, no domain name, is not a DNS problem.
After 15 minutes or, the problem resolves, and starting the machine works fine.
Occasionally (once a day or more), it will return to the problem of General failure for 15 minutes, then return to normal.
The problem does not occur in safe mode with network.
The problem occurs whether the user is logged on the machine.
I have disabled the Windows Firewall to try to resolve, without success.
I also installed McAfee.
Thanks for any help that anyone can provide.
CP71
I would start by removing McAfee and using MSE at least to test. You can not just disable McAfee, it should be removed and he is known for this type of problem.
Tags: Windows
Similar Questions
-
I chose the trial for InDesign download version and it has been downloading for 30 minutes. It normally takes too long or I did something wrong?
Clear the Temp / Tmp folder and try again
Or you can also download the direct download link:
http://prodesigntools.com/Adobe-CC-2015-direct-download-links.html
Let me know if you need help
-
We have a laptop that had a problem and the restoration of the system was not an option.
We have managed the problem by manually removing the antivirus (Avast) and laptop computer did start again.
Now we have a new problem and it is that the laptop does not connect to the network regardless of what we are trying.
- Repair of Windows 7 SP1 installation.
- It's not Pick-up a DHCP address from the network.
- When assign us a static IP address, it will yet talk network. With Ping, we obtain a GENERAL FAILURE.
- No matter what network adapter that we use (Wireless, LAN or even install another network card) all show the same problem.
- We tried the usual stuff reset the IP stack (netsh winsock reset.. and netsh int ip reset).
- We tried to remove all network cards and install them again.
- Check the file hosts for something strange.
- System Restore did not work because there is no historical points that we could come back.
- Check the log of network 2 events, we see the related errors:
(1) NetBT - event ID: 4307 - initialization failed because the transport refused to open initial address.
(2) service managed control - event ID: 7023 - The IKE and AuthIP IPSec Keying Modules is completed with the following error: failed to load.
Any suggestion is welcome.
Raoul.
Sorry for the delay.
We finished rebuilding the laptop to solve the problem.
- We have exported all data.
- Took note of all the license keys, we managed to recover.
- Format the hard drive
- Install Windows 7, install applications and updates.
- Import data.
Raoul
-
Why my drive hard Boot keep reading and writing for 20 minutes after the start?
As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.
10.10.5 OS version
Model: Mac Pro
ID: MacPro3, 1
Processor: Intel Quad-Core Xeon
Number of processors: 2
Total number of cores: 8
(Vivid RAM) memory: 8 GB
Any help will be greatly appreciated.
Thank you.
Check Console.app and see what happens. Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.
-
Intermittent "general failure" on ping traceroute
Hello
I currently have a problem with a windows 7 pc where I get random disconnects Internet.
I replaced the cat5 cables and even installed a new pci network card.
When I do a ping www.google.com t I get constantly answers but every 5 minutes or so I get a "General" random failure
I uninstalled my antivirus and even turned off my firewall
Any help on this matter with this would be greatly appreciated I'm at a total loss as what to try next.
Thank you very much
Howard
Hello, Howard.
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the brand and model of your computer?
Thank you for details on the question and your efforts to resolve.
This problem may occur because of corruption DNS cache or incorrect network settings.
I suggest you to clear DNS cache and check.
Reference:
DNS (Domain Name System): frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/domain-name-system-FAQ#1TC=Windows-7Note: Please see the article "How can I clear the DNS cache?" in the article above.
Please also read this article and check the issue.
Reference:
Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1I hope this information helps.
Please let us know if you need more help.
Thank you
-
Hi Chris,
It would be great if you remember to do it when you return, there is no problem for me to wait before the end of the month.
I'll catch up with you then.
Kind regards
Chris.
Hi everyone who has problems with the installation of patch number KB2770816 especially those with a Medion computer. I had this problem since early August and contacted Microsoft. They worked on my PC in the last two days and have now to rectify the problem. They will post how to solve this problem in due course. The information on the pages of the community regarding the evolution of the registry entries are incomplete. Until the correct information is available, I would recommend that 'hide you' this update to avoid delays when you restart your PC, etc. After you installed the updates. I can not praise Microsoft technicians quite strongly on how they have dealt with this problem for me and would recommend others to use its easy when things go wrong.
-
Ping localhost error general failure
I started to have problems to connect to some services the on my my computer Windows 7 64 ultimate after update Microsoft Security Essentials Client and restart. Hello, JungleDisk, and other services are running, but nothing can connect to them. I took some sort of network problem and then noticed that when I ping 127.0.0.1, I get a general failure error. All other network interfaces on my machine work very well. I tried netsh int ip reset and netsh winsock reset and that did not help. I scoured the internet looking for resolution without success. It is at the origin of the critical problems on my machine and I want to do everything I can to avoid reinstalling Windows. I also tried in safe mode without a bit of luck. Any ideas?
Thank youAndrewI finally got almost everything works again. It was, indeed, Microsoft Security Essentials. I tried different ways to force the uninstall and only of Revo Uninstaller has finally managed to get to a point where I could reinstall Microsoft Security Essentials without getting the message that it was already installed. After that my closure still does not work, but then I was able to run the Microsoft Security Essentials real uninstall without getting the fatal error. After that, I rebooted, reinstalled Microsoft Security Essentials and rebooted once more. After that my localhost address had returned and the majority of services is now available. There are a few issues I have with my credentials of service postgres probably because of the many things I tried the week last to solve this problem, but I hope that this is not really a problem of difficulty.
Thank you all for your help in this matter.
Andrew
-
Ping the loopback interface fails - general failure - all windows 7 Networking fails
Hello, I am looking for advice on the following question:
1 ping the loopback interface fails general failure - ping 127.0.0.1-2 netsh winsock reset - does not work - the system cannot find the specified file3. the wireless interface detects the network but remains in limited access and never receives any dhcp server ip address, other wireless devices work correctly.Hello
I suggest you follow the steps below:
Method 1:
a. click on Start -> all programs -> Accessories
b. right-click on command prompt and select run as administrator.
c. type ipconfig/flushdns and enter.
Method 2:
Reset internet protocol follow the steps described in the article below:
http://support.Microsoft.com/kb/299357
Method 3:
If the steps above fail, follow the steps in the link below:
http://TechNet.Microsoft.com/en-us/library/cc757819 (WS.10) .aspx
I hope this helps.
-
RESOLVED: Ping: transmit failed. General failure
I am having some problems with the connection and rattling. Right now, I only get not all ip addresses on all types of adapters, not even a 169.x.x.x address. When I try to ping what anyone, including the 172.0.0.1, I get the error "Ping: transmit failed." General failure. " I tried a system restore with no luck. I tried to uninstall and reinstall my wireless network card driver and restart my computer. I've never seen this problem before and am off troubleshooting options. Any advice? Thank you.
Solved the problem by doing a restore of the system and by performing a DNS flush. I don't know what caused the problem or what really fixed it. Normal is just a setting on a washing machine.
-
LaserJet 3055: General failure on HP Scan and Capture for LJ 3055
In need of an application to scan to PDF with my LJ 3055 (used to have a great HP application when it was released for Windows 95), I downloaded HP Scan and Capture. It worked once, scanning photos, but it now still gives me the message "General failure", though: he sees the all-in-one printer/scanner, the driver is up to date, I can print and scan from Windows...
Help me please!
Zolock wrote:
Thank you! No idea why HP Scan and Capture does not work? I'm really looking for a multiple page PDF document Scan.
No idea why Scan and Capture do not have on your system.
I guess you could start over - resinstall HP Scan and Capture:
Remove Hp Scan and Capture of the applications and features > restart > open Store > search for scanning and Capture > install
Create a multiple page PDF file:
- Single document pages > scan to computer
- PDF documents of single page already on the computer
Reference:
Options of the digitization program
Comments
NAPS2 provides several page scans. I used it for these to create test documents. How achieve you the exit depends on what you use for entry.
-----------------------------------------------------------
- Create the new PDF on several pages
Scanning single pages printed using NAPS2 (the printer) > save to a single output file.
-----------------------------------------------------------
- Import single page documents into a PDF file
NAPS2 requires that PDF pages / files created within the program (during the first scan of the printer).
Option 1: Print the individual pages > scan these pages into the computer using NAPS2 > create the desired output file (single pages or a handset). Messy but doable.
Option 2: If the NAPS2 program was used to create the first scan, NAPS2 can import the page file to use for a new file / exit.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PDFSAM also has the ability to create a document to multiple page since the entry of the individual page.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
GIMP manages this function - supplied editing tools Gimp; Some functions are easier to use than others. Great program.
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
Having a computer laptop Dell 1550 with back, bought Windows 7 pro. After complete installation connected to the local network, but when connecting on a local network in my office do "PING TRANSMIT FAILED, GENERAL FAILURE" error pls suggest
Hello
The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
-
BlackBerry Smartphones coming out email problem "general failure."
I used the storm 2 for a year without problem, so today I can not "answer or send new emails, I get a"general failure"in the above status message box and an 'x' next to the outgoing message, but I can send me an email and receive emails of others."
Outbox file size is too big, delete old messages, works fine now.
-
My email on my iPad 2 (IOS 8.4.1) froze last night on a blank page I was trying to send a few photos. I know I get emails that I can hear the ping and my email application shows that I have two new. I tried to put this off, then restart, but nothing changes. When I type my email application it goes to the blank page and after a few seconds goes back to my home page. I'm leaving on a trip to Europe at the moment I'm in a bit of panic. Any help will be greatly appreciated.
You tried to close the Mail application via the taskbar of the iPad: force an app to close on your iPhone, iPad or iPod touch - Apple Support ?
-
I need help with an installation failure to interpret and troubleshoot a Setup log.
Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects. Shared Apple Final Cut X uses a different format that is not compatible with FCP6. Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.
Starting with OS X Lion, FCP6 would install not in Lion and thereafter.
According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle. He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.
Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:
https://discussions.Apple.com/message/26309669#26309669
I used this method with success to install FCS2 in Yosemite:
[click on images to enlarge]
However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:
First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along). I am unable to find such a method to post here.
Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:
If this element is not required, then maybe FCP6 can be installed successfully without it. And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.
It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.
Here is the post on MacRumors with pre-installed Setup log:
-
How can I disable all the pings and tones and notes and sounds of the HP Officejetpro 8610?
I can't tolerate the noise. How can I disable all the pings and tones and notes and sounds of the HP Officejetpro 8610? This 'thing' emits a beep and the pings and plays music.
Thank you
Sam
Hi Sam,
On the front panel of the printer, scrool main screen to the right and the clock setting icon.
Then click Printer Setup, and then select sound effects Volume.
Select and confirm, that should disable all these sounds.
Shlomi
Maybe you are looking for
-
I just bought a new IMAC and can't find my Cannon M8150 on printers
Can someone tell me what is it please
-
Hi all Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm pr
-
I installed windows 10 x 86 system based on my notebook G245 G3 pro, I can't find the drivers from the HP website. I've tried to get 8.1 pro 64-bit drivers, but they do not work with win 10 pro 32 bit operating system. Please help me in this regard.
-
Why is there no timestamp in the log for incoming or outgoing traffic? After a restart of the software, why is my single port forwarding disabled or set to False. Any idea would be appreciated.
-
Vista Security 2012 the virus calls for money to remove it.
I have a wonderful virus called Vista Security 2012 I don't have money for a tool of reoval and I'm not that savy will and take things out of the registry. Does anyone have a better solution? original title: Vista Security 2012