General material

Similar Questions

• Use of NOR-9161 & 9215 in SE 2.5

  I can collect data using NOR-DAQmx Base 2.2 using the foregoing and the recorder of data OR included, but so far have failed to help SE 2.5.

  Is it still possible?

  Thank you

  Randy

  HI RJJE,

  I don't know exactly what you're asking when you say "the result to file would be about 1 second or so that would include general material time?, ' but what it looks like you're asking, is if the file is written to update all about 1 second. If that's what you mean, then the answer is about Yes.

  In your acquisition process, you need to specify the sampling frequency and the number of samples. so if you use this as an acquisition continues, then each iteration of the loop there will be 1000 samples that will be processed by the average stage, while an average value will be written to your file. This process will be repeated until you stop the task. This means that between the time readings Signal Express 1000 samples of your PC RAM until he wrote that value to your average file, it would be 1 second over the amount of time it takes Signal Express to retrieve only the data from RAM PC as well as the time it takes the average work to process these samples of 1000 plus the amount of time it takes actually to write this average value in the file.

  If you are looking at a time between iterations to be about 1 second, then these other values will be very low in comparison. They are really dependent on the speed at which your processor can handle these other functions in your task.

• Fight against the blue screen (BCCode: fe)

  I have Windows XP on my laptop and did have a slow start up and now slow down the use of the internet. Recently, I got a blue screen error...

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 4105

  Files helping to describe the problem
  Mini051612 - 01.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: fe
  BCP1: 00000008
  BCP2: 00000006
  BCP3: 00000001
  BCP4: 875BE978
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1.

  I don't remember do the recent updates. My program and anti-malware Antivirus can't find not all malicious files. Is it possible that I have a virus? Can I delete the above files, or do I need? They are located under AppData > Local > Temp > WERA277. How can I fix it? Any help is very appreciated. Thank you!

  Hello

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  ==================================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Help with error on blue screen under Vista 32 bit

  Had this message pop up several times. Any ideas?
  Thank you!
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: fe
  BCP1: 00000008
  BCP2: 00000006
  BCP3: 00000001
  BCP4: 867B 9000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini122811-01.dmp
  C:\Users\xxx\AppData\Local\Temp\WER-37955-0.SysData.XML
  C:\Users\xxx\AppData\Local\Temp\WERB24D.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  ==================================================================

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 0X000000FE BUGCODE_USB_DRIVER

  Hello

  I get this 0x000000FE BUGCODE_USB_DRIVER error when I install windows 2008 R2. I can not install the patch from microsoft because the operating system is not installed and it restarts and gives the above error... It was working fine before with Windows 2003 R2 as soon as I proceeded to upgrade, get the following error...

  Any solution?

  Thanks in advance

  Mayur

  Hello

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  ============================================================

  You can solve these yourself using BlueScreenView, MyEventViewer and other methods
  in this thread. Don't forget to use MyEventViewer to check at the time of the BSOD or less than a second
  in front of them to see if something is useful in the event viewer. Top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  BlueScreenView will allow you to read and publish information if necessary minidump.
  HINT check the 'cause' however keep in mind that the given driver as being the "Cause" could have been
  pushed to the fault by something else - this is especially true if the 'cause' is a default Windows driver
  or a program.

  =============================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  Hello
  I have Hp pavilion dm4 laptop computer with windows 7.
  Since last one I get a blue screen with error message over and over again. I've updated the BIOS and test HDD
  and tests of memory but not able to draw any conclusions.
  Please help me...

  Here is the error description...

  A problem has been detected and windows has been shut down to avoid damage
  on your computer.

  BUGCODE_USB_DRIVER

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is the new installation, ask your hardware manufacturer or software for windows updates you might need.

  If the following problem, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select advance startup options,
  then select Safe mode.

  Technical information:

  STOP: 0X000000FE (0 X 0000000000000008, 0 X 0000000000000006, 0 X 0000000000000005, 0
  XFFFFA800760A7A0)

  Thank you
  Mansi

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  about known issues with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =====================================================================

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  Error "STOP 0x000000FE" in Windows 7 or in Windows Server 2008 R2 when the computer enters
  or recovery mode sleep (S3) or from hibernation (S4)
  http://support.Microsoft.com/kb/974410

  Those 4 other KB Articles are available (from the date of this reply)
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000FE&SPID=14019&catalog=LCID%3D1033&RES=10

  ============================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  You can solve these yourself using BlueScreenView, MyEventViewer and other methods
  in this thread. Don't forget to use MyEventViewer to check at the time of the BSOD or less than a second
  in front of them to see if something is useful in the event viewer. Top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  Is it a Windows 7 upgrade installation or Windows 7 comes on the factory system?

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• VMware Fusion 5 and Boot Camp 4

  Hello

  I experienced performance problems in programs related to the guest operating system (Windows 7) 3D in VMware Fusion 5 (inside OS X Lion mountain). I had to install Boot Camp 4 to do my job.

  Could you please tell me if I'll be able to use my material directly when I start my disk to Boot Camp with VMware Fusion?

  I would like to know if install VMware Tools don't mean anything?

  I still can use my Boot Camp separately from time to time (with complete equipment of available resources).

  I running everything maxed-out MacBook Pro with the Retina display.

  Thank you

  Could you please tell me if I'll be able to use my material directly when I start my disk to Boot Camp with VMware Fusion?

  Generally material only between a normal file based Virtual Machine and execution of the partition Boot Camp as a Virtual Machine's hard disk.  With a normal file base Virtual Machine to the default hard drive is virtual and with execution of the partition Boot Camp in a Virtual Machine uses the physical volume of the physical disk.  The rest is no interpreted differently, whatever issues you work around native-boot will always be a problem when the Virtual Machine running the partition Boot Camp in a VM as if it was a normal file-based.

  I would like to know if install VMware Tools don't mean anything?

  Usually without however you really have no choice but to install VMware Tools running the Boot Camp partition in a Virtual Machine or WPA/OPA will be an ongoing problem when switching back.  VMware Tools will manage the permutation of the WPA/OPA database between two environments after Windows and Microsoft Office (if installed) are enabled in each environment.

  I still want to be able to use my Boot Camp separately from time to time (with means complete material available).

  You will be able to do.

• Same material, cannot vmotion.  Stops at 13% with a general system error occurred: invalid argument.

  I have four IBM (now Lenovo) x 3550 M4 (7914AC1) hosts that have been purchased by groups of two, several months apart.  Those purchased at the same time can vmotion between them but they cannot vmotion with those bought later OR with one of our older infrastructure (Nehalem IBM level - x 3650 M3, M3 x 3550, etc.).  The most recent M4 can talk to the fine old hosts.  Can I migrate invited powered down.

  VMware support was not able to give any help on this matter and have lost instead of my time (including do not contact me for weeks and also current exit without changing to another engineer; manager failed in this regard, too).

  I pulled the material apart - I can say it's all the same material (looks the same, has the same numbers and RUF).  The machines were configured the same.

  Firmware isn't exactly the same thing on the material but is VERY close.  I have one of each generation updated with the same Xpresspacks of IBM, and so except for the image diagnosis of pre-start, I think that they are the same.  I'll check this again once then.

  VMware drivers are the same.  They were not.  They are now.  I got 5.5 latest drivers for everything that I can find a driver for (including cards CF - using the driver Qlogic native VMware NICS (igb); approx 10 GB (not being use IGB but fact still); the provider CIM, MegaRAID controller.  I used VUM update their last 5.5 (standard license) with all the patches.  vCenter is a 5.5 vCSA was last updated.  I went into the BIOS settings side-by-side and ensured that everything is the same.  I did the same thing with everything I could think of in vSphere (found about 5 differences, but nothing fixed).

  Management is the network of vMotion.  It's on the same VLAN as one of those guests are on (the clients are spread over 5 different VLAN).  VMware support put in place a different vSwitch for vMotion with no luck.

  The symptoms are the same regardless of their orientation (old to the new, new to the former) and don't care about the type of virtual machine (Windows 2008R2, CentOS 5.5, RHEL 6.7) or at the level of the material (VM 10 or 7 VM).  It also fails if it is standard or high priority or if it is with the web client or the Windows client.

  The place with the most characteristic symptom that doesn't show anywhere in googleland except to the pastebin is in the file /scratch/log/hostd.log of the host.  The host that sends the guest throws a vmsvc.vm error VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument.

  If anyone else has seen this (obviously someone because it is on pastebin) and understood, please enlighten me.

  Thank you!

  Jeff

  These are the two hostd.log files (most recent, from the host first, then older receiver host).

  -----------------------

  From Server hostd.log:

  -----------------------

  2016 04-18 T 20: 16:29.927Z [37501 B 70 verbose "Default" opID = user F2241F42 - 000018 D 1-64-1 b = vpxuser] AdapterServer: target ='vim. VirtualMachine:2', method = "refreshStorageInfo".

  2016 04-18 T 20: 16:29.956Z [37501 B 70 'Hbrsvc' verbose opID = F2241F42 - 000018 D 1-64-1 b user = vpxuser] Replicator: VmFileProviderCallback VM (id = 2).

  2016 04-18 T 20: 16:29.972Z [37501 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:29.978Z [37280 B 70 'Local' verbose opID = cb7f34c4 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:29.992Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:29.993Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"

  2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose 'Vimsvc.ha - License-Manager' opID = cb7f34c4 user = vpxuser] load: existing file loading: /etc/vmware/license.cfg

  2016 04-18 T 20: 16:30.014Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)

  2016 04-18 T 20: 16:30.172Z [35981 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="prepareSourceEx"

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] PrepareSourceEx [1461010590046389], VM = '2'

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info "Vcsvc.VMotionSrc (1461010590046389)" opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionEntry: migrateType = 1

  2016 04-18 T 20: 16:30.172Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] JrnlCreate: created 1461010590.14

  2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] Transition State (VM_STATE_ON-> VM_STATE_EMIGRATING)

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73

  2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstVmDirPath / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/.

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstVmFileName =guestvm.mydomain.edu.vmx

  2016 04-18 T 20: 16:30.173Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] SetVmdbVirtualDeviceChange: deviceChange # 0

  SIOC: SIOC is not notified to start the injector

  2016 04-18 T 20: 16:30.173Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] Migration changed state from NONE to BEGIN

  2016 04-18 T 20: 16:30.173Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] finished scheduling PrepareSourceEx [1461010590046389].

  2016 04-18 T 20: 16:30.173Z [' info 36591 B 70 ' vm: / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/guestvm.mydomain.edu.vmx "] disconnect the current control.

  2016 04-18 T 20: 16:30.173Z [FFA4FB70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vmodl.query.PropertyCollector:ha - property-collector ", method = 'createFilter'"

  2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument

  2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389]: prepare the job completed with error vmodl.fault.SystemError

  2016 04-18 T 20: 16:30.174Z [372C1B70 verbose 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx"] VMotionCmdCb: shooting ResolveCb

  2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: VMX reports needsUnregister = false for migrateType MIGRATE_TYPE_VMOTION

  2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: failed with error: {(vmodl.fault.SystemError)

  -> dynamicType = < unset >

  -> faultCause = (vmodl. NULL in MethodFault),

  -> reason = "Invalid Argument."

  -> msg = ""

  ->}

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] Migration changed State to BEGIN done

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] called finished

  2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] State of Transition (VM_STATE_EMIGRATING-> VM_STATE_ON)

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hostsvc' verbose] change of State received for VM ' 2'

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] entered VmPowerStateListener

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] successful VmPowerStateListener

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hbrsvc' info] Replicator: powerstate change VM: 2 old: 1 new: 1

  2016 04-18 T 20: 16:30.174Z ['Hostsvc' 372C1B70 info] decremented SIOC injector Flag2

  2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] VMotion finished cleaning

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: writes active = 0

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: finished journal

  2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] /var/lib/vmware/hostd/journal/1461010590.14 [JrnlFilePersistenceProvider::DeleteJournal] removal.

  2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlDelete: deleted journal

  2016 04-18 T 20: 16:30.175Z [37280 B 70 'Hbrsvc' verbose] Replicator: Remove only group no entry for VM (id = 2)

  2016 04-18 T 20: 16:30.180Z [37501 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target='vmodl.query.PropertyCollector.Filter:session[574b3c38-6a6b-214e-4bf3-428b10abded9]52760c3e-4722-159c-5c3a-df6eb23ddbbc ", method = 'destroy'

  2016 04-18 T 20: 16:30.201Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:30.207Z [372C1B70 verbose 'Local' opID = 44d5f9ee user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:30.223Z [37501 B 70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:30.224Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.162Z [35981 B 70 verbose 'SoapAdapter"] responded to the request of the State of service

  2016 04-18 T 20: 16:31.314Z [35981 B 70 verbose opID 'Default' F2241F42 - 000018 D 1-64-a2-b7 = user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeSource"

  2016 04-18 T 20: 16:31.314Z [37501 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-b7 user = vpxuser] CompleteSource [1461010590046389]

  2016 04-18 T 20: 16:31.320Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:31.326Z [35981 B 70 'Local' verbose opID = 8590ebdf user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:31.340Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:31.342Z [37501 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"

  2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose 'Vimsvc.ha - License-Manager' opID = 8590ebdf user = vpxuser] load: existing file loading: /etc/vmware/license.cfg

  2016 04-18 T 20: 16:31.371Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)

  -----------------------

  Hostd.log of the reception host:

  -----------------------

  2016 04-18 T 20: 16:29.798Z [FFD35B70 'Hostsvc.DvsManager' verbose] called PersistAllDvsInfo

  2016 04-18 T 20: 16:30.245Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:30.251Z [29940 B 70 'Local' verbose opID = ac976ee5 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:30.265Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:30.267Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeDestination"

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination [1461010590046389]

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 WARNING opID "Vcsvc.VMotion" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination: card not found

  2016 04-18 T 20: 16:31.417Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:31.424Z [29940 B 70 'Local' verbose opID = fa72f2f7 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:31.439Z [FFD35B70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:31.441Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  Using IPv6 on new hosts? If so, try disabling:

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73

• General questions about the material

  Hello

  1. it is true that the new power supply uses only 70% of its power? If so, after a few years, how many % of its power it wil use 60, 50%!

  2. I know that viruses and the power supply crash problems wil and sometimes every time reboot the computer.

  can also problems of memory each time restarting the computer?

  the same question I ask for the processor and the video card.

  also, I want to know if the hard drive has a behavior too also.    Wil just Yes or no will suffice.

  Thank you

  Johan

  Yes, everything you listed can cause a BSOD, or reset, but reboot is perhaps most often a power supply problem.
  I'd be inclined to suspect the PSU power supply, HARD drive, motherboard, processor and RAM (in that order),
  with random reboot.
  Virus/Malware can also launch reboots.
  Graphics cards would more often cause BSOD or TDR errors, but random restart is possible.

  Power supplies have abilities different, usually measured in Watts/amperes. How much of this
  the capability is used by the machine in percent is determined by the requirements of the power of the components
  in the machine.
  Dedicated graphics cards are often the component with the higher power requirement.
  The processor also uses a lot of power, and in the absence of a dedicated graphics card would have the
  power requirements more. The other power requirements of components are quite small.

  Power supplies have an efficiency rating, with a performance of over 80% is desirable.
  Power supplies some of the ability to lose over time, but the current amount of the lost production is not
  drama short term (first five years?), at least not with good quality food.
  Cheap power supplies are another story. The can't count on him for reliability and are not
  a good option on machines that are often under heavy load - machines games for example.
  An additional 50-100W on requirements minimum psu is commonly used on gaming machines
  as the assurance of stability.
  If a power supply fails it may damage other components.

• Satellite M40X - material works does not after re-installation

  Hello

  I just reinstalled my Satellite M40X with a WXP Pro. For some reason all the edge
  hardware does not work and it is still impossible to install it manually.
  Does not not to date:
  W - Lan (not shown)
  Controllers USB (although my usb mouse works fine)
  all of the controllers listed in the list of material

  I tried to download the drivers from the hp toshiba but nothing worked
  I could not find the drivers for the controllers in general.

  If you have suggestions please tell me

  Best regards

  Jan

  My first question; why don t you use the recovery CD?
  My second question: WinXP Pro contains SP2?

  Hey dude, or you have installed the fake software, drivers or / and updates are missing.

  First install all updates from Microsoft and secondly if you install divers manually do not forget that you do it in the right order!
  Did you check the Toshiba driver page exactly? You will find installation instructions. Have you followed this guide line?

  I thik you know now what to do.

• Is upgrade material on Satellite L655-183 possible?

  Hello

  I want to know if I can plug a new processor, or may be a graphics card in my laptop Satellite L655-183.

  Thank you.

  Hello

  In General, these updates is not supported - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
  On some models of CPU, upgrade is possible, but it can be quite risky.

  Supported upgrade is RAM and HARD drive.

  Problem is that laptops have a specific design and use some cooling system for this hardware platform. Hardware produce little heat and the material must be properly cooled. More powerful hardware will produce more heat and can result in property damage or overheating.

  If you want to have more performance I recommend to increase the RAM to the maximum level and exchanging the HDD with SSD is much faster. Two upgrades are without any risk to your machine and you can do it alone.

  I did it with my machine and I'm really happy now Mr. Windows (Win7) starts in 30 seconds.

• Finished samples timed material vs single-point: different speed?

  Hi all

  Although I had several questions about this request before that separately have been resolved, there is one last thing that remains difficult.

  Shortly:

  My application acquires data from 2 analog and synchronous inputs on 2 channels of analog output.

  There is a trigger stop set on a PFI-pipe with a single switch. To make of this

  I had to switch from single-point over acquition timed work material.

  This set works very well when I read not less then a 100 samples once with a sampling of 1000 Hz. frequency (when I go below a sample of 100 to read--> E-200279)

  Ideally, I would like to read about 10 samples with a sampling frequency of 1000 Hz.

  However, using single-point timed equipment acquisition I can easily do that without a problem. Even just reading

  a single sample once with a sampling frequency of 1000 Hz does not have a problem. But impossible to use the block of relaxation of reference as a signal to stop with this setting!

  Question:

  For me, there are two solutions, but so far I could not work on one of them:

  (1) build a stop trigger in an single point of timed material acquisition

  (2) change something in the acquisition of finished so that I can read faster.

  Any suggestions, what causes the difference between the two speeds to be able to read the data and a way to solve it?

  Thank you

  Mark

  Mark,

  I mocked how I think I would like to address the issue and tied it to the top.  The general idea is that we use HWTSP for our analog I/o and counter looking edges on our signal "stop".  Each iteration of the loop, we check if we saw the stop signal.  If we have, then we write zero for the output channels and stop the loop.  If this isn't the case, write us the data of your comments, we have calculated.  I've added some comments on the block diagram that I hope are useful.  I have currently no any material of series E share, so it may not work properly out of the box, but I thought it would point you in the right direction.

  I offer this precaution:

  Windows is not a real-time operating system.  Therefore, it may take the liberty to give as much CPU time to other processes or applications as he likes.  As a result, it is likely that you will not miss a few samples (IE, your loop will not go faster hardware issues are examples of clock).  I configured DAQmx must return a warning you when this happens.

  Hope that helps,

  Dan

• all in a habit of 6500 a print - General error 0 x 61000016

  my all-in-one keeps refusing to print

  get the error message

  General error

  There is a problem with the printer 0 x 61000016

  I tried to stop the printer with the power button, disconnect the source of power and re plugging as he said, but it does not help thanks all

  Hi katt6,

  Welcome to the Forums of HP Support! I see you found a general printing on your HP Officejet 6500 a error, did you base unsuccessfully troubleshooting.

  "I would like to continue you here: a 'carriage Jam' or ' 0X610000F6" Message displays on the all-in-one

  Please complete all of THE steps and let me know the results. If the printer is still in error state after have done all the troubleshooting steps I suggest that contact our support to the 800-474-6836 as it is the material of printers. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• My computer won't let me download a cd of new material. Said hardware has not passed windows logo testing.

  I want to add an adapter usb to my computer to watch movies on my TV. It came with the software, however the download access is denied.

  When you install the hardware in your computer (almost always), you must install a 'pilot', which is just software that tells your operating system (Windows, in your case) how to communicate with the hardware.

  Microsoft has a program she calls 'the logo test' which enables a company to label its products with the Windows logo.  Not every small manufacturer wants to go through the load of this test program, but if a company is trustworthy - and Trendnet is - then the fact that their products have not passed official testing procedures from Microsoft doesn't mean that their products will not work with Windows.  This is why you can usually ignore a message to the effect that a product has not passed Windows logo testing - if you also a pretty good reason to believe that the product will work.

  So just follow the instructions supplied with the adapter installation, put on the CD and install the software.  But the installation of this card is only the first part of your trip.

  Although I've not set my TV to watch streaming video from Netflix or Amazon, as I understand it, you need a TV that can be connected directly to the Internet.  In other words, you cannot download and save a copy of the video complete on your computer and then read it from your computer to the TV.  That's why's called it "streaming" video - you're not supposed to save a copy to your computer, but rather to look at the 'stream '.

  Thus, Amazon said, "the easiest way is to connect your TV to your router or modem broadband (DSL/Cable, for example) with an ethernet cable.»

  A lot of people with a connection broadband has a router, which has generally 4 Ethernet Sockets (and perhaps a point of both wireless access).  If you had one, you would just connect a "vacant" Ethernet between the TV and a cable to your router.  You, unfortunately, have a router with a single Ethernet Jack (I know you thought it as a modem, but it's almost certainly a modem and a router inside a box of Physics).  So, as you acknowledged, you don't connect your TV to the cable modem because it would need to disconnect your computer.

  You have two choices.

  You can buy a cheap Ethernet switch (e.g. this one) which would connect you to port on the back of the modem cable and then connect your computer and TV to two of the other ports on the switch.  This would probably work without having to make adjustments to configuration on your cable modem - but in the past, some customers wanted cable ISPS to pay extra for each computer connected to the modem cable and makes it a little difficult to so add connections on your own.  I don't think that is always the case, but because I don't have cable - especially not the same cable ISP like you - I don't know about you.

  Or you can buy a second Ethernet adapter of your computer (which is what you did) and then set up the "Internet connection sharing" (ICS) on your computer so that the TV can connect to the Internet through your computer.  Because you have already purchased this material, you probably want to set up ICS.

  Although there are many websites that explain how to configure ICS, because XP is becoming obsolete quickly, many of the older sites are more fully functional, including one who should have been better to show your situation (sharing a connection to local network to the Internet with another connection of LAN)

  Use the Network Setup Wizard.  Go to network connections (start > run > ncpa.cpl > OK) and click on "Set up a small business network or home."

  The 3rd screen looks like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29.shtml

  Choose the first choice.  Even if your computer connects 'via a residential gateway"(your cable modem/router) the"other computers"(TV) will connect"through this computer."

  The next screen should look like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29/LAN.shtml

  If you have correctly installed the USB adapter, you should see a line like the one that was highlighted in the image (it's your modem cable connection) and a second line describes your connection to the LAN USB.

  If the wizard does not recognize the USB adapter as a connection to the local network, it will not let you continue (click on the 'Next' button on this screenshot, where there is only one LAN connection, and you'll see what happens).

  Assuming that the wizard allows you to continue to do so.  Your "computer name" is already filled in. Do not change. You can add a description if you wish.  When you get to the screen 'file and printer sharing', you can disable this feature (you're not going to share files between your computer and the TV).

  Confirm on the summary screen that "Internet" is through your "Local network connection" and that the wizard correctly selected your USB adapter as the "connecting to your network" (this screen shot shows that the connection to the Local network is connected to 'your network' because the Dial-Up connection is connected to the Internet)--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29/Dial-Up/04--2.shtml (click on the scroll bar to) see the screen shot in all)

  When you complete the wizard, you should be able to connect your TV to your USB adapter and it should work (Yes, there is a lot of "desirable"; good luck).

• starting problems & General freezes; lots of q

  using vista home premium 32 bit. updates installed as they come. use KIS2010 but now NortonIS 2010 this year. (machine 'built'; Intel Core2Quad 2.2 GHz, 4 GB of DDR2 RAM, disk HARD 750 GB [(Win dit 700 Go) in 4 primaries * partns;] D: (C: 50GO pour Windows uniquement (pour autant que je peux garder de cette façon) for docs, E: for apps, F: for games)], nV 260 video card, its X - Fi CT (pci) card.

  whenever I boot compu, needs about 4 boots (or more) before you actually do connect the screen and even in this case usually get freezes during the first connection or v soon after. This is a normal behavior for a few months; He had settled some until I had to reinstall Win, when * all * the old probs returned, incl. probs detected as "hardware probs."

  Prev, then use KIS, Kasp suprt said turn off Fwall Defndr & Win Win as KIS employment. Now using NIS, have not changed anything Defndr or WFwall, (being turned off), assume that even with NIS like KIS. However, I noticed in 'services' that Win Fwall always ongoing, when well same WFwall rerports it is off; This service will allow not being extinguished. Could be part of the breakers prob?  How to disable?

  Mem test (std) says no probs, Mem (extended) test abandoned the full 60% after 5.5 HOURS...

  Have backlit usb kb (light effectively shows whats going on with usb bus); during the startup, it lights & unlights several times; However, frequent freezes usually see the kb lights go out, including during startup.  During the "session" Informatics, freezing happens seemingly randomly, sometimes quite frequently, sometimes not much. Freeze freq see the kb off informed, although recently starts to become freezes with Ko lights still on.

  When freezes happens, freq but not always bad noises of spkrs if theyre on (mobo not spkr) (X - Fi Fata1ity pro, pci, pci-e not; latest drivers etc installed Creative, except the last last Win Update, what installation pgm says "could not detect any supported product" - but the window title his research on pci-e bus?)

  Someone has ideas how detect/identify what really is the prob?  Is it possible to activate the startup mode where loads a file at a time & want to proceed next file loading b4? (F8 does not give this option in Vista) (& while I ask MS guys (please), what is with the refreshing line of a screen at a time after the 1st full screen during startup? looks like so above).

  (* 4 primary partitions: why don't Win allows create prolonged partns until all 4 allocated primary partns?) Should be C: Win partn primary, logical rest lead to prolonged paux. In addition, vaguely rembr space adjustment side for a Linux 'experience', at the time, but seems part Win mgr does not detect the Lx partns; could explain lack 50 GB of DISK space).

  This story now. But for the record: this machine was lost when a virus? feat? wipe the TWO the BIOS * & * the backup BIOS, despite the victory & NIS being totally up-to-date. Cut a short mini saga, had to replace the motherboard, CPU, RAM and HDD (cost commercially wipe HARD drive 750GG (since don't want to take the risk of any malware assets re-wiping BIOS on new mobo) + ~ $5 = new 1.5 TB HARD drive).
  Useless Norton (of course, no guarantee of any anti-malware; & licenses end-user generally designed to protect the machine, not the user)-do not use Norton again for sure for sure.
  But I wonder if the above problems were foreshadowing this?

  PS: "a defective"material"" guy - all components (not to mention the cpu, ram, motherboard, replaced & hdd) (but including food) were transferred to the 'new' machine and always seem to work very well from March 2012) (& old HDD still intact).