Generate stubs for Web server - unknown QName

Similar Questions

• Designjet t520: designjet t520 default login and password for web server

  Hello!

  Which is the default login and password for the web server and how to reset the password?

  Hello
  
  As mention Rashed, there is no password to the factory.
  
  Try a Restore Factory Settings.
  
  If this does not work, go to the Help Menu and do a Soft Reset. (Don't do the hard reset).
  
  For access to the support menu press on and hold the power button for 15 seconds, or at the home screen tap home, back, home, home.
  
  Concerning
  
  Mike

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André

• Requirements for Web server for ColdFusion

  We are running Windows 2003 Enterprise both 2000 Advanced Server and must support a form designed in ColdFusion. I have some difficulty to find the requirements for the web server. Pointers would be greatly appreciated. Thank you!

  http://www.Adobe.com/products/ColdFusion/productinfo/systemreqs/

  I went to www.coldfusion.com and clicked on the 'system requirements '.
  link on the right.

• Deletion of e-mail in Outlook Express for Web server

  I have Outlook Express 6 and AT & T/Yahoo email on the web.  I love the speed of using Outlook Express 6 to delete the mails in the Inbox (the capability of listening more double glazing of emails).  How can I delete the emails in Outlook Express to synchronize the deletion of the email in my Yahoo mail server?  AT & T/Yahoo is my default e-mail account.  Outlook Express should be the default e-mail program to use this function?  Removal of e-mails in Outlook Express removes not email from Yahoo, even if Outlook Express is set to 'Empty messages from the folder items deleted leaving' and the delivery has been set to "remove the server after deleting in deleted items.  Would appreciate any help.

  I believe that OE should be set as default to make this work. Try just to test it.

  Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express.

  Making OE the default e-mail client:
  http://www.oehelp.com/oedef.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• PS CC 2015 - save for Web Gif "unknown error."

  I made a rather large animated gif and need help to export in a gif file.

  I tried CC 2014 with no luck and updated level to 2015 with the hope it would work. Nope. I pushed too hard on the capabilities of the PS? Is there something weird about programming?  You have all the tips and tricks? Something will help you!

  

  

  Export as that will only save the first image.  SFW is the approach that you need.

  Try changing the frame rate to 12 fps and reduce the size of the first image.  For my Gallery I target usually 800 px to 400 px as a maximum width (or height for the vertical animations).

• Is the fix for the problems of WebHelp in RoboHelp versions 10 and 11 work when you access by using a Web server?

  I use RoboHelp 10 with the last fix of WebHelp.

  I copied files in the fix to the folder specified in the instructions, regenerated aid and tested my WebHelp on IE 8-11.

  Seen on the spot, the WebHelp output looks very good.

  Help is accessible by users of a web server, so I set up the output newly generated on our web server and tested the output and that's what I found:

  IE 8: Index and glossary are taking 3 or 4 seconds to load, which I guess I very well.

  IE 9: Index and glossary are taking 3-4 second to load. Index entries are too big and use a different font.

  That is to say 10: when you click a topic in the search pane, you get a blank page. When you click an entry in the Index, you get a blank page. After using the Index/Search and then go back to the content page, you get a blank page.

  That is to say 11: entry of Index are cut

  Has anyone else run these question? I can live with the questions about IE 09/08/11, but on IE 10 blank pages are unacceptable. If the fix is not resolved these problems or I do something wrong? Why the fix would work locally but not when accessed from a web server?

  Any info would be much appreciated.

  Thank you

  Mack

  Interesting. When you say the latest patch, which one is?

  (For an overv of all patches, see

  ( https://www.wvanweelden.eu/articles/robohelp-patches-and-updates)

  In IE10, see script errors? And if you press F12 to open the

  Console developer, it shows the errors/warnings?

  Kind regards

  Willam

• Additional installers do I need to use the web server?

  I am building an application in LabVIEW 8.6 and want it includes the Web of LabVIEW server and eventually Web Services.  Should additional installers I include?  In addition to the runtime, the following options are: 'LV Web Services', "NI LabVIEW Run-Time Engine Web Server", "NI LabVIEW Web Server."  I can find no documentation explaining the differences between these - especially the last two.

  Hello Nathan,.

  From 8.6 web server is a separate component. Just as LabVIEW desktop is a separate installation program since the runtime if there is a web server for each component. In addition, Web Services is a component that is generated on the web server.

  So, if you need web server in the Office two, LabVIEW and RTE and you eventually will need to deploy web services, as well, then you'll need to install these components.

  Here's our FAQ to get Web services work - you might be useful.

  FAQ Web services

• With regard to the registration of plugin for web client package in vcenter server

  Hello

  I am able to create the package (.zip file) plugin, using Eclipse plugin virgo and able to deploy and test the same thing with the serenity customer as described in the SDK tutorial.

  To register for my plugin package as an extension with vcneter server, I followed steps below:

  1 using the perl of the vi perl SDK code, and I am able to register the plugin and can see the crowd as well.

  But I am unable to see the plugin in vcenter server. As newspapers are not get generated for web client. (Maintenance records is not created. All the required services are running).

  Please suggest any script I can use to deploy the plugin for the production phase. And also the steps to generate logs.

  Thank you very much.

  I have attached a java program showing how to register a vSphere Client Web plugin with vCenter server. This program is not recommended for use in production because it does not check the certificates.

  Also this program will work if your plugin zip archive is located at the url "http://". If your zip file is at url 'https://', then you must provide the digital fingerprint of the server in the server property of the

  Extension data object. You can do the same way that the property of the customer was populated in the provided code. Here is the link to the Extension object where you can find all of the properties of an object to extend VMware vSphere 5.1

  HTH.

• Integrated Web Server Setup for Linux

  HP 8100 on USB, but I would like to print wireless from Tablet (Nexus-7). There seems to be no way to access the essential EWS from a Linux system. Are there opportunities that I missed something?

  Hi IanSinclair

  I understand that you want to configure the printer on the wireless network.
  
  
  
  Here is the url for the drivers Linux configure the wireless on Linux first.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2020 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5218794 #n181
  
  
  
  Connect the printer with the ethernet cable to the router to get the ip address.
  
  
  
  Here's a url on how to print the configuration page.
  
  http://support.HP.com/us-en/document/c02871800
  
  
  
  You can then configure the printer through the integrated wireless network Web server. Type the ip address from report access SAP configuration and configure the wireless. Be sure to disconnect the cable after the settings app.

  Once the printer on the network the Nexus-7 should be able to connect successfully.
  
  
  
  I hope this helps.

• Server operating system is better for the deployment of a web server

  hiiii everyone

  I have two operating system a windows web server 2008r2 and another is windows server 2008r2 enterprises. Now, I want to develop a server may I know the difference between these above OS let me which is better one.

  best regards

  Sri ram

  Hello

  Please contact the Microsoft Community.

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  We know if you need help.

• MMR received message when trying to install updated updated unknown security for SQL Server 2005 Service Pack 3 (KB970892) Code 737D error__

  I get the code 737D unknown error when I try to install security for SQL Server 2005 Service Pack 3 (KB970892. I tried everything...

  Here is the Vista Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

  They will help you in the SQL Server Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Where can I find the integrated Web server for a Photosmart 7520?

  I want to change the password for direct printing and the touch screen says change in SAP.  Where the built-in Web server?

  The SAP is the built-in Web server. It is the internal Web site created for the printer when connected to a network.

  To access SAP:
  * Get the IP address of the printer from the control panel of the unit
  * Web open favorite, program navigation
  * Type the IP address in the URL bar and press ENTER to access the page

  Let me know if you need more information.

• What is the web server integrated for Windows XP Professional?

  Hello

  I would like to know what the web server integrated for Windows XP Professional.

  I don't know of a free web server like Apache or IIS.

  I want to host my site on the net using the web server integrated in XP (not IIS).

  Thanks in advance.

  It is not just any server web, other than IIS, integrated with Windows XP Professional.

  You think perhaps of Personal Web Server (PWS) which was part of the old operating systems like Windows NT.  Which no longer exists in Windows XP Professional - it has been replaced by IIS.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• How to: Perform a Firmware Upgrade using the integrated Web server for HP printers

  Watch this video that shows how to perform an update of the firmware, using the built-in Web server for HP printers.

  Hope this video is useful if you find that it had to update the firmware on your HP printer.