Generation of Blu - ray: no video (red, green, image etc.)

Similar Questions

• Yet CS6 hangs at the slideshow built component of generation of Blu - Ray disc/folder

  Still no longer meets the construction of the slide show during the comprehensive construction of Blu Ray disc or folder. Project consists of 96 min video timeline via PrPro Hotlinks and tracks of Japanese & English subtitles, the menu main and 4 submenus (2 Chapter menus, subtitles and slide show). 2 menus are movement w / audio.

  Slide show consists of 147 jpegs. After the failure of the build 2, I reduced all images to 1080 uniform height. No transition, no advance manual, no pan & zoom. Fit to audio duration slideshow 2 active mp3 totalling aprx 7 mins and slide individual durationof 2 sec. Aspect 16:9 the value. The size of the encoded slideshow 58,42 MB.

  Under SP1 Win7 home i7-3610QM x 8 total 16 GB w/NVIDIA Quadro 3000 M gfx mem. No problem before with this configuration for several Blu - Ray and DVD projects. It's the first exit with a slide show component. This project built successfully for workcopy Blu - Ray disc, video editing and subtitles, but without menus or slide show.

  Help!

  Elliott

  Slideshow problems have been resolved by opening in Photoshop and saving. I think it had something to do with stripping to junk in the jpg file. I wasn't sure where you their reduced.

  Yes, reminder, new names always. I create a new slidesho import slides with new names.

  Access denied points to permissions. I would try the option "Run as Administrator"; corrects a variety of weird things. You know how many times Win7 said you (even if you are a user with administrative privileges) that you do not have access and click on continue if you want to grant this permission to yourself... I think still waiting for no man, woman, or operating system.

• Unable to play Blue ray movie, video display freezes in the meantime

  Original title: film gel

  My blueray freezing in the middle of a movie. Must restart movie every time. becomes more common.

  Hello

  1 did you do changes on the computer before the show?

  2. you use Windows Media Player or any other Media Player to play the movie?

  3. What is brand and model computer?

  4. the question limited to any particular file or it happens with all files?

  Method 1: Update the video drivers

  There could be a problem with the video drivers. Update and check if the problem persists.

  See the site:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

• Media Smart DVD, not so smart... Will play only some blu ray, not all.

  When I get a computer with a drive blu - ray I expect to read blu ray discs... all of them. It works with some but not all.

  Records, it does not work with, what happens is it will ask me 'Do you want to check updates' and there will be a box to check yes or no. Basically, it will say disc is ready to play, just play to push. Easy right? HELL NO.

  If you check Yes, it will make the symbol of the wait little and the request of updates, then come right away and you still ask once, a circle without end to check updates. If you press n, it will go away, then you have a few options, one is to open the menu and see if there is actually an update... No. no updates it. the other option is to do what he says and push the game because he thinks that the blu ray is ready to play. Once I press play it starting to think and appears as "you want to check for updates" again. It's so frustrating. HEY HP, FIX CELA DUMB TRAP CIRCULAR THAT USED LET ME WATCH BLU RAY.

  And it is a blu - ray disc video block buster movie. Not some copied disk random. So, I know that it is not the disc.

  After spending a lot of time chatting with their service Dept. It seems that this will not work until the next update mediasmart. The technician told me to use Cyberlink power dvd 10 until then, I downloaded the free trial version, and it worked fine. Thus, they have 30 days until my free trial exhausted.  We will have to see.

• Error in creation of the blu - ray image "resource not found".

  Whenever I try to create an image, I get an error message complaining that one of my strengths (a film) cannot be linked.  I tried to re - connect the file including its audio track separate and still says they are already linked.  I can get an overview of the timeline with all the relevant assets.  What can I do to solve this problem and to create my image?

  Are you sure that the error is not 'export file not found '? Yours is the only example of 'not found assets' that I find in searches.

  See this thread:

  Re: during the generation of Blu - Ray, export file not found, referring to the timeline

• Sony Blu - ray HBD - T79 does Streaming Netflix

  Machine is less than a year. Working fine until recently. I can connect to Netflix & select video. When the video starts to load (about 2 seconds), a blue vertical line flashes on the left of the screen & I find myself in the main menu of blu - ray players. Amazon, youtube, hulu, etc. everything still works. I spent over 3 hours with Sony technical support but all they do is move me around & I have to explain the problem to each person over & over & above. After the 3rd call to them they sent me a disc of the M13 Firmware update. R.0491 which I installed it, but it made no difference. I tried all technical support told me to do it several times. I also was on the phone with technical support from Netflix and they could not help either (called twice and spoke to 2 different people). I can still play Netflix on my PC & my laptop (so I don't think that my network is the problem. However, I tried the blu - ray on wireless & wired without result. I want to send the machine to Sony for repair but they claim, there must be a problem with my network (I think it's a problem of software inside the machine). How can I get Sony to take it seriously? My 1 year warranty is about to expire. Thanks in advance for any help you can offer. Tim

  Hello timsrv.

  This question is difficult to determine what is at fault. The problem is all the other work of services except Netflix. If it were all services unit would probably suffer the same problem, if it was the network that any of your devices should be able to access. However the problem lies either individually or with your Netflix account. Nothing has changed since the last time it worked? If it's a software that would change with a status update. A few things you could try must go into your Netflix account on your computer and disable all devices, then re-registration the. You can also try logging of Netflix the your unit and logging and then back with the same account. To do this you have to factory reset it since Netflix since after you back out to the blue line flashes. To factory reset, go to home > reset > reset to factory default settings. If you can not always connect you can try another account to narrow down the question. If you don't have a second account, you can try, you can make one with a free 30-day trial of Netflix and test this.

  If my post answered your question, please mark it as "accept as a Solution.

• quality AVCHD, mpeg2-blu ray RIP

  Hello

  I have worked on a project, this project is not to create a reader blu ray and dvd, DVD, no problem to get 100% quality I did the following:

  AVCHD on DVD

  -export to pal dv widescreen. 30 minutes took 2 hours
  -still to burn the DVD - 30 minutes

  = Excellent SD quality.

  AVCHD to Blu RAY

  That is the problem.  Blu Ray.

  When I export to mpeg-2 blu - ray and look at the images encoded - when the camera moves you get like a tear on the edges of the images - hope this makes sense.  I had this same problem, when I was doing mpeg dvd so decided the approach described above.

  I also tried putting the chronology in still and by creating a bluray folder - always get the same thing.

  I left the mpeg2 blu ray default settings.

  Any ideas or links to something that will help me get a superb quality? Blu ray.

  Thanks for your help

  

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.

• Red images in my animation Blu - ray Menu

  It seems that whenever I start a new project, Adobe has a new problem for me to work through.

  I'm building a Blu - ray player with a motion menu, which is the length of a piece. I have done this before and had no problem. But for some reason, this time still CS6 done something weird. On the final drive, about two seconds in the menu request, what I had for the motion menu are replaced by solid red. He blinks several times at first and then stays on until about the mark 35 seconds, where it goes back to normal. The menu still works, and the buttons are always visible and selectable.

  Part of the video was created in After Effects and exported as a .mp4 file. Who has been in Premiere Pro CS6 in a chronology that had a single image of the menu as an image until the subject of the second brand 37, i.e. when the EI animation video would begin. This chronology has been exported as file m4v H.264 Blu - ray with a rate of 20-35mbps, that is what all the other videos are set to. The video plays well, if I bring first or look elsewhere, but as soon as even transcode it for the menu, I get the red screen near the beginning. I tried more low and high bit rates, but no matter what, he always does in the same place for the same amount of time.

  Is this a problem still CS6? Don't even like it when there is not a lot of movement in a motion menu? I did others where there is no query in large part of them and had no problems. Or a video driver problem or a problem of video files? Should I simply use a mp4 for the menu video motion since it gets transcoded anyway? Or even is upward if a motion menu is too long?

  I do not know what causes this, but you can find other users who report the problem.

  A user has worked around it by the video resource brining in still and transcoding there. I don't know why this avoided the problem. the delimma is not transcoding so as the reposting in the menu.

  I suspect that you can avoid it by putting all the elements not cross in the film, then still does not make the video in the menu.

• Toshiba Kira - screen flashes red green blue black

  Hi all

  I have a Ultrabook Kira I bought last year and it worked fine until about 3 months ago.

  But now he has a problem with the screen as follows.
  She suddenly starts cycling continuously full-color on-screen, and then sometimes it returns to normal for some time and randomly goes back again to the annoying cycling colors.

  Depending on the problem, it will loop the following exact sequence of colors: red, green, blue, black, gray.

  I don't think that it is a loose cable problem because it goes into the problem and comes back without any movement of the machine.

  I mean, the machine itself starts the dysfunction and restores normality by itself.
  These days, I can't work without an external monitor, since the problem is now practically constant.
  I've updated the bios but the problem remains.

  I searched for this problem all around the internet and could see that many people, who bought this laptop model, have the same problem. Thus, it seems to be a failure of the design.

  Thank you!

  > These days, I can't work without an external monitor, since the problem is now practically constant.

  For me, it would mean that the graphics card is OK and the problem must be linked to the internal display.
  However, it looks like hardware problem and that's why I recommend you contact the after-sales service provider authorized to set especially if the warranty is still valid.

  Your comments would be appreciated

• Qosmio F750: Toshiba Blu Ray Disc Player does not play videos in 3D

  Hallo,

  I had to re set my PC and installed then drive Blu Ray Disc tosbiha and also Super D and XTune.
  Also also made installation with xtune.

  So now, I'm trying to watch a 3D movie it is not possible to play, the system displays only 2 parallel pictures.
  In the player, Miss me the 3D icon.

  I also installed Caberlink Power DVd V13. But here also no 3D film is projected...

  Does anyone know how to enable 3D in Toshiba Player or how Cyberlink Power DVD to work with this laptop...

  Thank you

  > If I try now to watch a 3D movie, it is not possible to play, the system shows only 2 parallel pictures.
  > In the player, Miss me the 3D icon.

  See this Toshiba document:
  [3D video content not displayed in 3D when you use the disc drive Blu - ray Toshiba on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038C0000R01.htm]

• How to convert Blu Ray Disc of the movie in general video and HD video formats

  How to convert Blu Ray Disc of the movie in general video and HD video formats

  Hello

  I doubt that this is possible because Bluray discs are mostly protected against copying.
  But if you have the Bluray m2ts file on your HARD drive, then you could try the tool called convertXtodvd. But I don't see that the reasons for this
  I mean that you will lose the quality of film converting the blueray to dvd.

• Encoded video does not work on Toshiba Blu - ray disc player

  I have a problem I'm trying to encode a sequence of images into a video container, but does not work the video encoded on toshiba blu - ray disc player... I use the following command to ffmpeg to encode images and convert a video:

  ffmpeg-i "C:\ManVsWigan\Frames\%d.png" - vcodec libx264 'C:\ManVsWigan\encoded.mp4 '.

  I have tried several video codecs but no luck yet
  "- vcodec mpeg4.
  "- vcodec mpeg2video.

  If you have an idea please help me

  >... I'm trying to encode a sequence of images into a video container
  Please be so kind and try to explain why you need all this?

  I mean Toshiba portable computers offers equipped with pre-installed readers and offer laptop owners to enjoy watching BD movies. Everything else is not interesting for s Toshiba support I guess that if I put t think that this question has something directly with Toshiba.

  Have you tried to find the answer on another forum?

• HP Omni 120-1050xt: screen goes to red, green, blue, white, black after upgrade to Windows 10

  When the PC is idle, the screen turns red, green, blue, white, black, and every time I need to turn off the machine. He said "best driver for your device is already installed" - Intel HD Graphics. I tried to uninstall, install.

  Greetings,

  HP not support your PC when you run Win 10.

  I suggest that use the "Go Back " process win 10 ASAP.

  If this is not possible because of your graphics problems you'll have to do a restore to factory HP.

  I can help you more with this if you wish.

  If the upgrade was forced on you there are ways to stop the involuntary update.

  Let me know if you need further assistance.

  Jay

• No longer autoplay video disks (DVD / Blu - Ray) (NOW RESOLVED)

  I use windows 7 Professional (x 64) and have this annoying bug.

  As of today, when I insert a Blu - Ray or DVD video disc, I get this error:

  "Windows cannot access the specified device, path or file.  May not permissions to access you the item. »

  I am the administrator of my PC and there is NO secondary accounts.  Guest account is disabled.

  There should be NO problem with permissions as I have full control of all my records and files.

  This only happens with video discs and not to other disks.  I tried Google, but have found no chance whatsoever.

  I can still access the files via windows Explorer, so I don't have access to the disk.  So why make this error instead of automatic reading I want to use.  When I insert a video disc, I want it automatically run my program of DVD/Blu-Ray and not spit this error at me.

  I had this problem last year and he only went after a reformat of my boot drive and a clean reinstall of windows.  I want do not undergo this nightmare again.

  Please help.

  I use windows 7 Professional (x 64) and have this annoying bug.

  As of today, when I insert a Blu - Ray or DVD video disc, I get this error:

  "Windows cannot access the specified device, path or file.  May not permissions to access you the item. »

  I am the administrator of my PC and there is NO secondary accounts.  Guest account is disabled.

  There should be NO problem with permissions as I have full control of all my records and files.

  This only happens with video discs and not to other disks.  I tried Google, but have found no chance whatsoever.

  I can still access the files via windows Explorer, so I don't have access to the disk.  So why make this error instead of automatic reading I want to use.  When I insert a video disc, I want it automatically run my program of DVD/Blu-Ray and not spit this error at me.

  I had this problem last year and he only went after a reformat of my boot drive and a clean reinstall of windows.  I want do not undergo this nightmare again.

  Please help.

  I have no fear to think, but I solved the problem myself seconds after this thread.  AutoPlay is borked and DVD and Blu - Ray discs have been set to open a program not belonging is not in movies.  I put the function Autoplay use Arcsoft TotalMedia 5 to open when you insert a movie DVD or Blu - Ray and all roses.  I will not close this thread in case other users with this issue of stüble on it and the solution works for them also that google gave no miracle for what actually solved this problem.