get 5.0 IDE to attach to the Simulator - is it possible?

Similar Questions

• Cod files does not not in the Simulator!

  First of all, I must say that development of BlackBerry is probably the most frustrating form of development that I met.

  I can't get my HelloWorld application to run on the Simulator.

  I have successfully built the cod file using eclipse and one build.xml.

  I copied all the output files (including cod file) in the Simulator installation directory manually.  It did not work.

  So I tried to load the java program directly using the Simulator via file > load Java program...

  None of these methods work.  There is no icon in the downloads folder.  My request is not listed in the list of the Application Simulator, BUT he is listed in the list of the Module.

  operating system: Vista

  JDE version: 4.6.0

  IDE: eclipse

  It's maybe a stupid question, but still: your application has an enty point?

• missing net.rim.device.resources.Resource of class, ask not appearing is not in the Simulator

  Hi all

  I use the Eclipse JDE plugin to develop my application.  It worked well until I have start using hash tables in my code.  After that my application will not work and gave error "error loading of class net.rim.device.resources.Resource.

  This class is part of the standard library and do not know what this error is due to.

  I tried to reinstall eclipse and all the plugins and now my request will not even appear in the Simulator .

  Help, please.

  Thank you

  Sri

  What M.Sohm said is true. To expand a bit about it: If you have a ResourceBundle and the package in the file .rrh statement is at odds with the .jdp, strange things can happen. And if you move a ResourceBundle in a different package, training package not updated automatically, you must address yourself.  Make sure that the package in the .rrh statement corresponds to the Package Explorer view say it should be.

  So when you add hash tables, which was the only thing that you added?

  Do not panic on the application not appearing is not in the Simulator.  When you run an application in the Simulator, build files (.cod, .jar, etc.) are copied into the directory of Simulator (\plugins\\components\simulator).  When you reinstalled, the directory of Simulator has been rebuilt from scratch, without the build of your application files.  Because you can't build, you don't get new build files to copy into the Simulator.

  Hang in there.

• Is it possible to access the files shared in the Simulator?

  My Playbook application creates a few files in the shared files folder. When running my app in the Simulator, is it possible to (read) access these files from Windows?

  Thank you

  First, configure the PlayBook Simulator as a target.

  1. Click on the file-> New-> other...
  2. Expand the BlackBerry Tablet OS.
  3. Select BlackBerry Tablet OS target, and then click Next.
  4. Enter the IP address of the Simulator (or use automatic detection).  Leave the password blank and complete the wizard.

  Once you have the PlayBook Simulator configured as target, use the following steps to access the folders.

  1. Click on the window menu.
  2. Choose the command display see her-> from others.
  3. Expand QNX.
  4. Select target file system browser , and then click OK.
  5. In the target file system browser navigated to the folder that contains the file that you want to copy.
  6. Right-click on the file you want to copy, and choose copy to.  You can also drag and drop files to and from this window.

• When I insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).

  I use outlook express 6 on windows xp pro.

  When I Insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).
  I did use the option of fixing , I used to Insert.  The reverse also occurs.  When someone using OE sends me an email with
  a peak inside the body of the email, it appears in the box and not in the body of the email. This happens only when they concern the
  my program.  Others using OE does this experience between them.

  My mail sending format is HTML and in its settings, I checked "send pictures with messages. In addition, in the tools of internet explorer, advanced, multimedia.
  I 'send photos' checked also, in the email window, under 'format', ' Rich Text (HTML) "checked.

  I have recently reinstalled cleanly win xp to address a system idle in general.  All updates are in place and tested it with antivirus and anti-malware programs.

  That is what it is?

  [Transferred from Internet Explorer]

  Original title: outlook express

  Tools | Options | Read. Read all messages in plain text it is checked? This it will make become an attachment.

• When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.

  When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

  When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

  ===================================
  Try to visit the support site of your new service provider
  and search for instructions on how to set up your email.

• Im getting attached in the form of PDF files, that I can not open

  Im making attached in the form of PDF files, which I can not open as they come out all mixed write a cross etc I don't know how open them I have 2007 microsoft office word and excellent, thanks

  Cannot display PDF files

  You must install a PDF reader to open and view PDF files.
  Are two of the most popular to install Acrobat Reader or Foxit Reader - so you will be able to view the PDF files.

  Both are free:
  http://get.Adobe.com/reader
  http://www.foxitsoftware.com/PDF/reader

• Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  This question cannot be resolved when you use the brush with an effect.

  It cannot be solved with the form of the task.

  Try just drawing on larger scale, maybe then it won't happen.

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  The field calculation order is probably not set correctly. The specific configuration procedure it depends on which version of Acrobat you are using. Acrobat 11, you would go first in forms editing mode (Tools > forms > change), and then select:

  Tasks > other tasks > set field calculation order

• I created an email link in my PDF document, how do I get the PDF file as an attachment to the email?

  I created an email link in my PDF document, how do I get the PDF file as an attachment to the email?

  You must add a button with the command "Send form" and enter the URL:

  mailto:[email protected]

  (using the real email address you want to use, of course)

• Get the name of the attachment and the e-mail address in bpel process

  Hi all

  I use UMS adapter to query mail servers and get the attachment and save it to the local disk.

  In the payload of the UMS adapter I get href of the accessory, but I'm not able to understand as to how to get the name of an attachment and the address of a mail in my Bpel process.

  Please guide me to make them.

  Thanks in advance

  Samreth

  1 double click on your composite receive activity.

  2. go in the Properties tab of your activity.

  3. click on ' + '.

  4 window that appears, scroll down and select "jca.ums.from" and store it in some variable say fromAddress (ensure, before adding this property u create variable string fromAddress).

  5. click on OK.

  6. in the same way add property to ' jca.ums.msg.content - description "drop down and assing it to a variable.

  you're good to go.

  I hope this helps.

  Kind regards

  Karan

  Oracle Fusion Middleware Blog

• I get a response while trying to access the info on my c drive, which says access denied, any ideas on whats going on?

  I scanned a document to my office on my scanner saves in my cdrive, but when I try to access the analysis, I get a response saying my drive c, the only changes made to the computer last week, access is denied or if is I changed my internet to my home region provider, my office is the same as always.  As of last nite, I was able to do my cdrive home.  The service of the Agency has not changed and I made no changes to the computer.  Help!

  Hello CindyRankin,

  Have you tried to take ownership of the file you are trying to open?  I look through the steps in the link below and let us know the status.

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• object attached to the CPP

  If you use the feature. destroy() to get rid of an RPC object, is possible to add this object to the attached objects of a container?

  Here's a quick overview of how I do it, (maybe made some mistakes of typo, but it's the idea)

  in qml

  IMPORT CustomApp 1.0

  see the documentation if you have not yet created it and saved an object

  objectName: "mainPage".

  attachedObjects:]
  {To support
  ID: _support
  }

  onCreationCompleted: {}
  _appUI.saveControlAddress (mainPage);  where mainPage would object to your control name

  c ++

  move the object or in fact any address as QString

  * this easier than trying to find object unless you go to the page you can find all the objects on the page othe

  void CustomApp::saveControlAddress(QObject *pageIn) {}
  Page = publication;
  }

  Create your object and attach to the control by using the appropriate method

• Help the action of the button to open a file that is attached to the main pdf doc

  Hello

  I created a button and used an icon saying "click here...". "the action I want to join him, is having on the mouse down to open the file that is attached to the document.

  Is this possible?  If so, how direct the acton "open a file" to be laid down in the document?  path can not understand...

  He had an idea of how to make a javascript button action to open the fixing Panel...

  That's what was written... and then below that is my question about what was written...

  Thomp wrote:

  Try thisif (app.viewerVersion < 8)
  app.execMenuItem (...);
  on the other
  app.execMenuItem (...);

  What would go in the "(...)" above?

  
  I am very poor in javascript, but I'm guessing that there is something that I need to fill? Am I wrong?
  Thank you...
  I, too, am trying to get my button action to open the attached document in my form pdf - NOT the navigation panel... I've already done this...

  Thanks again for all your comments!

  Hi sicilianmissy65,

  Try this.  Attach the file you want to open in your main PDF.  Now, to add a button and in the dialog box properties on the Actions tab, select go to a Page view and click the Add button.  A small dialog box will appear to the top heading create go to View - don't do anything with it yet.  Now, double-click the attached PDF file to open it.  Now click the set link in this dialog box.  In the main dialog box, you should now see in the action area-

  Navigate to a Page in another document

  Attachment file:PDF

  Hope this helps,

  Dimitri

  www.pdfscripting.com

  www.windjack.com