How to solve problems using the event viewr log?

Similar Questions

• Problems using the event to write new parameter values to VISA structure

  Hi all

  I created a VI to read an Omega flow meter. It is possible to change setpoint (setpoint (0-2) SLPM) of the meter and the gas (O2, CH4,...). To read instrument I write its ID (A-Z), followed by a carriage return, for example: A + 0x0D

  I created a VI with the events to write only the parameters to the instrument when a value is changed. My VI works but from time to time, it does not write the parameter change (gas or set point). I think that is has something to do with the while loop containing an entry VISA.

  Open FMA contains parameters and VISA opend

  Case of timeout initialize writing gas and setpoint for the first time

  Other events are for the change in the value of setpoint and gas

  How can I make sure that any change of setting will be writtent the instrument?

  Thank you

  Salvation Bass,

  Well, it is true that I lose this way time-out feature.

  No, you do not lose this feature. You put in a different position.

  You must call it BEFORE your loop!

  I'm not sure that I am following on this one there

  Why are you not sure? You have a large number of constants "0d" and it would be great to see that they are displayed in HEX mode instead of the normal display mode.

  The new VI manages events sometimes... but sometimes, missing a few changes... I think it is because there is an entry in the while loop. Do you have any idea how to prevent this?

  Never, NEVER use parallel loops to write and read on the same device on your serial port!

  How do ensure you that you always get the right answer to your order sent before?

  What is the purpose of using a second loop here? A loop with no wait States?

• How to remove data in the Event Viewer log

  If I go to the event viewer in computer management and select these words. He did a search on the summary of the events of Admisitrator, recently seen nodes and newspaper summary. I want to remove all references in the summary of the events of the administrator, but I want to continue to use the log for all future events.

  I tried to do by ensuring that there is a check box FILE reviews "Show all hidden files" and I also took the checkbox "Hide protected operating system files".  I have to program Data/Microsoft/Event Viewer and the folder is EMPTY.

  Is there a way to do this correctly?

  The observer of events (local) summary of administrative events on my computer displays the event in the last hour, last 24 hours and 7 days. Do you mean that you have received errors Event ID 315 2,000 over the last 7 days?

  If you say yes then the priority should be to find why you get so many errors. It so happened that I had the same report and wrote the following to another forum on January 2, 2012. It can help to solve your problem.

  This error was gets me a few months. This afternoon, I tried to resolve an event ID: error 2 and found a blog that offers a solution to this problem:
  http://manlyelectronics.com.au/blog/resolve-Windows-error-session-HomeGroup-log-failed-to-start-with-the-following-error-0xC0000035-in-Event-Viewer-Microsoft-Windows/

  If you ignore the warning and click "Leave the homegroup" and restart the computer, your home network still works. You can also get no event IDS more: 2 errors and the bonus for me was a cessation of the event ID: 315 errors. I rebooted the computer several times and errors have ceased.

• How to solve problems with the conversion of an email/webpage to PDF?

  I want to convert a newsletter by e-mail (600px wide and a sunken length - about 4 pages)) into a pdf file.

  If I view the document in a browser and then use it to create a PDF from Web page - I use Acrobat Pro 9 - it creates it is fine, but displays the document in the default page, which currently is A4. However, the title of original shows at the top of each of the 4 pages, and shows the address of the site at the foot of each page before the pagebreak.

  Can anyone tell how I can convert without these "extras" if it pleases you, and is there anyway to convert this type of document to PDF without going through these page breaks?

  You can disable the URL in your web browser in the layout. To change the stretchy header, go to the preferences of add-on PDFMaker in your browser and clear the checkbox "place headers and footers on the new page. Tab available, in this same dialog box, you can adjust the size of the page.

  

• How to solve problems with the download of updates?

  When I try to manually update the phone, I mentioned that there was an error when searching for updates.
  In addition, the update of the market without download, because thus there was an error.

  The market download / install error is a known bug. If this is not what is your problem, please specify the problem you are experiencing.

  Thank you!

• Someone knows how to solve problems using webfonts self-hosted in Muse for iMac?

  I try to use once downloaded and self-hosted in Muse that I purchased from MyFonts.com as a kit times. I have all necessary formats required for use with Muse.

  Unable to install the .ttf files by double-clicking top (by following the instructions in the Muse tutorials) I put manually the .ttf files in the user > library > fonts folder on my hard drive.

  But when I add the webfonts in Muse, most fonts can not find system fonts match and therefore does not work properly. Can't understand why some files work and some don't because they are part of the same font and all located in the system folder.

  Is there a reason why this is happening?

  Thank you

  Hi Chris,

  As mentioned in the tutorial that akshay linked above, you need the version of the system font (i.e., police office) of the police as well. The .ttf that comes with the kit of web fonts is often (but not always) protected and not installable as a system font.

  Abhishek

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• How do I stop using the product key in my PC, so I can use it in my laptop?

  A long time ago I had installed Windows Vista (original) on my PC at home. But now I m leaving in another city and I m just using my laptop. I received a message through the Windows Activation (¨The product key you typed is already use¨) and two options: buy a new online or type a different product key. I Don t want to buy anything and I Don t have a different product key. So, how can I stop using the product key in my PC (which i Don t use it!), so I can type in my laptop? Maybe uninstall Windows in my PC could solve the problem, but I Don t want to travel back home 7 hours for this! What can I do now?

  PS. : Sorry about my English, I m still learning!

  A long time ago I had installed Windows Vista (original) on my PC at home. But now I m leaving in another city and I m just using my laptop. I received a message through the Windows Activation (¨The product key you typed is already use¨) and two options: buy a new online or type a different product key. I Don t want to buy anything and I Don t have a different product key. So, how can I stop using the product key in my PC (which i Don t use it!), so I can type in my laptop? Maybe uninstall Windows in my PC could solve the problem, but I Don t want to travel back home 7 hours for this! What can I do now?

  PS. : Sorry about my English, I m still learning!

  Your English is very good.

  You simply need to activate Windows in the laptop by phone call at a command prompt, type slui 4.

  You * must * also to remove Windows from your desktop computer, but if it is to wait a few moments, it shouldn't be a problem.

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• Problem with the event

  Hello
  I am facing a problem with the events. Please Ref. Event.zip the attachment.

  AEv.vi is a LV2G used for the reading/Generate/Init/destroy the event. Test2.VI is a main vi (we must run this vi)

  The AEv.vi Init action must be done in the other vi (other than the Test2.vi:- but for the objective test I've initialized in Test2.vi only).

  Test2.VI is used for genetate event.

  I could have called statically AEv.vi inside the Test2.vi to generate an event... but the path that comes is decided when running... (I have many live similar to AEv.vi...) .. who decided at run time...)

  The problem:

  When I run Test2.vi, it gives me the error code 1 (try running test2.VI... it gives the dialogue on the occurrence of the error)...

  Can someone fix this?

  Thank you!

  I modified your screws to do what I think you want.  The way you did the user events will not work.  I added a line to send orders to Ev.vi

• How can I print using the cover

  How can I print using the cover

  using the cover?  How is that? To be more specific, which is a software or hardware?

• How to activate and use the built-in webcam

  built in webcam

  How to activate and use the built in webcam on my desktop Dell Inspiron 1?

  MikeViklund,

  Try to read...

  Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

  Rick

• How low-level format using the code debugging?

  original title: how to low-level format using the debug code? can someone give a code

  How low-level format using the code debugging? can someone give a code

  Hi microcontrol.

  ·          What is the number and the model of the hard disk that you use?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  The Microsoft article below may help if you use a disk Western Digital or Seagate.

  Using DEBUG to start formatting

  http://support.Microsoft.com/kb/60089

  I hope this helps!

  Halima S - Microsoft technical support.

• How do I know that the event log are reported to any server

  Hello

  I can see all the event logs and error logs using the event viewer. But I want to know if newspapers are reported to some server just we report about a bug or non-response to application/software using the reporting window.
  I want to check if the event errors are reported on some server or not, if yes, to which server it is reported. Is this possible?
  The observer of events, or any application in the windows operating system keeps track of these reported error logs.
  Thank you
  Pankaj

  Hello

  As mentioned by Palcouk, Event Viewer records all events and activities on your computer but does not send it to any server. The call you have received is wrong / will call that could come from a potential hacker.

  I suggest that you go through the items listed below.

  http://www.Microsoft.com/security/online-privacy/prevent.aspx

  http://www.Microsoft.com/privacy/default.aspx

  http://privacy.Microsoft.com/en-in/fullnotice.mspx

  http://www.Microsoft.com/security/online-privacy/overview.aspx

  I hope that helps!

• How to post JSON using the Oracle Data Service remains

  I use the regular (not NoSQL or something) oracle database with oracle rest data service. Now I need to post data / put wrote in the body of the request using some json/xml format, how to consume them using the rest data service, searching inside the express application?  important: using pl/sql block

  Also, I am on,

  Data service Oracle rest 3.0

  Oracle Application Express 4.2

  Post edited by: Jacynthe

  OK, I got the answer. At the express request, there is a link called body variable (: body in BLOB). but the BLOB data type. So, we have to convert that in other data, type what we in pl/sql. I've converted data type witch CLOB supports json.