get a json result to display in a list

Similar Questions

• Why do I get 2 different results of these identical derivatives screws?

  I wrote two calculator derived from point by point identical screws and I am at a loss about why

  I get two different results.  I don't know what I have missed/missing which is the origin of this anomaly.

  Please take a look at the downloaded screw (written in LabVIEW 8.0) and let me know what I did wrong.

  Perhaps they are not the same after all.

  Tips for troubleshooting or suggestions are welcome!

  Thank you

  noviceLabVIEWuser

  item 1 of table 1 = 0.9998899980

  item 1 of table 2 = 0.9998900000

  Change the format to display the different values

  the code is identical

• Why can I get two different results from the same coefficients?

  I get two different results of the evaluation of the polynomial function.

  For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result when I evaluate 49940.

  For the second, I create constant array of values that have been returned by the polynomial Fit function (I typed in).  However, I get an incorrect result of - 120.7913 when I feed the constant table the function Eval Poly when I evauate 49940.

  How this can happen when I use the same values in table?

  A picture of what I explained is attached.

  Hi Altran,

  are you sure about using the 'same '?

  You compare them? Do you have (at least) set them to 17 digits display properties?

  Please attach a VI instead of an image...

• RemoteObject result to display in the TextInput field

  Hi all. I get a record result a value returned by a call to RemoteObject to a CFC. No problem. I then put that into an ArrayCollection collection. Then, I want to display the fields in a form with TextInput fields. I can't find any documentation on the way out the fields.
  
  The returned fields are ID, number ticket, title, URL, etc. Again, only 1 ticket is returned in the query.
  
  I tried:
  
  < mx:TextInput id = text = "{AltirisDetailsResultArray.TicketNumber}" / "txtinputTicketNumber" >
  
  But I get an error when compiling:
  1119: access of property may be undefined number ticket through a reference with static type mx.collections:ArrayCollection.
  
  I tried many ways, but nothing works.
  
  Thank you, all.
  
  

  Jeff, thanks for the help. Actually, I figured it out before check you in here once again and had just published my dose. It was right in front of me, so I knew what to look for.

  I just need to tell him where, in the arraycollection collection to get the field.

  MAGIC!

  Thank you, however, I'll be back.

• Can not get the address book to display the email addresses of the contacts

  I moved BT mail using Thunderbird to access my emails. Everything went OK, until I tried to import my
  contacts. I can't get my address book to display the email addresses of the contacts. I will admit that I do not understand the menu you want to move the two columns from top to bottom after importing the csv file. Please can you explain what I'm doing wrong here. All I want is first name, last name and email showing in the address book. Thank you

  I tried to write a procedure to http://thunderbirdtweaks.blogspot.com.au/2013/03/importing-csv-files.html some time ago here. but the thing is if you change the columns in the CSV file in a spreadsheet, first match that Thunderbird expected (both in name and order), then you don't need to play with this terrible UI that aligns with the name of the field name of the field.

  It is in this dialogue if you have the family name next to the e-mail address of the family name is considered to be the email address.

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx

  Whenever I open my computer I get the following message is displayed as a pop-up on the desktop: C:\PROGRAMA~2 Kodak\EasyShareSetup\$Regis~1\Registration_7.2.20.2.stx I don't have Kodak on my computer and I typed Kodak in the search above Start section and checked my programs.

  How do I get this off of my computer?  Any suggestions appreciated woul

  I typed Kodak in search above to start section and checked my programs.

  Instead do with msinfo32.exe to open system information.   Then, in the Environment\Startup software do a find, category searches only for Kodak

  Even better would be to use AutoRuns (utility system available on TechNet).

  HTH

  Robert Aldwinckle
  ---

• but wireless connection can't get all web pages for display on any browser

  connected to a wireless connection but can't get all web pages for display on any browsersit is connected with good strengh but does not connect

  Hello

  What happens when you connect to the router via a wired connection?

  Method 1: Reset the Internet (TCP/IP) Protocol:

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you are unable to connect to the Internet, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility. Reference:

  Reference:

  How to reset the Internet (TCP/IP) Protocol:

  http://support.Microsoft.com/kb/299357

  Method 2: Reset the default Hosts file

  The "hosts" file is an important Windows system file which maps hostnames to IP addresses. Its a simple text file that is stored in the folder "%windir%\System32\drivers\etc\" in Windows NT, 2000, XP, Server 2003, Vista, Server 2008 and Windows 7 32-bit editions. In the 64-bit editions, it can be also stored in the folder "%windir%\SysWOW64\drivers\etc\".

  Structure of the hosts file is very simple. It contains lines of text containing the IP address, followed by the host name.

  Sometimes this hosts file is hijacked by viruses, adware, spyware or Trojan software and is changed to redirect your browser to various websites containing malicious code. It could also block security Web sites and the Windows Update Web site in your system so that you can not install virus definitions and security updates in your operating system.

  Reference:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

• I'm running Windows SP2 of Visa and get the following message is displayed at startup: "sasnative32 file not found Autocheck ignored."

  sasnative32 not found

  I'm running Windows SP2 of Visa and get the following message is displayed at startup:

  'sasnative32 file not found that autocheck ignored. '

  I found this message in the registry and deleted but it keeps reappearing.

  It does not seem to cause operational problems, but I want to fix.  Any suggestions?

  The BootExecute key should contain autocheck autochk *. This measure of Chkdsk to run at startup.

  You have all Tune Up or optimization programs installed? It is possible, it is distributed with a different brand.

  You can determine what is written in the registry key by using the Process Monitor program

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

  If you have not used before, there is an introduction to use it here:

  Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

  If the value has been restored in the register at the time wherever you can connect, you will need to use logging to start. This can significantly slow down the boot.

  You may be able to determine what is responsible for disabling the departure of items using msconfig.

  http://support.Microsoft.com/kb/929135

• I'm looking to have an input field with the search button, search button click the search button below the search results to display. How can I do?

  I'm looking to have an input field with the search button, search button click the search button below the search results to display. How can I do?

  Hello

  998765 wrote:

  You are right

  Please pass by the database 2 day + Application Express Developer's Guide

  Check this code example

  1 create a text field element I say P1_INPUT_FIELD

  2. create a button

  Name of the button: search

  Action: Send the page

  3. change your report query and where clause to your query below

  It will search on ename and empno, in this way, you can add more columns

  SELECT EMPNO
             , ENAME
             , SAL
             , MGR
             , COMM
    FROM EMP
  WHERE TRIM(UPPER(ENAME)) like '%' || TRIM(UPPER(:P1_INPUT_FIELD)) || '%'
         OR TRIM(UPPER(EMPNO)) like '%' || TRIM(UPPER(:P1_INPUT_FIELD)) || '%'
  

  4. we find the source of the region-> page article to submit-> P1_INPUT_FIELD

  Hope this helps you,

  Kind regards

  Jitendra

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• After the merger of 7 shots in panorama, it took about 5-6 minutes to get the end result and the result had only something above 1000 pixels.

  After the merger of 7 shots in panorama he tooks nearly 5-6 minutes to get the final result and this result have only something above 1000 pixels edge long photo resolution? Why is this happening? I've been fusion 7 24Mpix of Nikon D750 RAW files. I saw a promo video where he introduced and there the panorama was above 10 000 pixel wide, so it is not a limit of lightroom, but something is not. Maybe some strange décor? Thank you.

  Well, the good news is... This isn't your files.

  I produced a pano 17310 x 6039 in less than 3 minutes. With or without adjustment.

  The only differences that we have so far is the platform. Mac/Pc

  Wrong guess you managed to repeat the question. Maybe a reinstall?

  I hope that someone else (on PC) may be able to provide alternative suggestions. Let us know if you yourself are able to find a solution.

• I'm on a W7 PC, of FlashProCC. -Have a Z1, jpg in the library. Choose Properties, export for ActionScript and get name Z1, class flash.display.BitmapData - how I introduce in a display by using Action Script 3.0 object?

  I'm on a W7 PC, of FlashProCC. -Have a Z1, jpg in the library. Choose Properties, export for ActionScript and get name Z1, class flash.display.BitmapData - how I introduce in a display by using Action Script 3.0 object?

  var z1:Bitmap = new bitmap;

  Z1. BitmapData = new Z1 (1,1);

  yourDisplayObject.addChild (z1);

• Web App search results to display the TASK parallel library instead of the list view

  Is it possible to get the search results Web App to view a presentation BPD instead of the standard list view?

  If it is possible the call would go on the form or on the page of results? (currently, use the same results page for several web applications.

  Thank you!

  Not quite sure what your after.

  You can send the results of research to a custom page, I think you did that? This page can have its own model.

  The module itself for the search results:

  {module_webappsresults, bkp, resultsPerPage, hideEmptyMessage, rowLength, sort}

  They are key elements where bkp being true means that search results will use the backup of the web application on the main list.

  If you apply the rule of custom template by adding a space and a model = "PATHTOFILE", you can specify the search results to use a custom template.

  http://helpx.Adobe.com/business-catalyst/partner/using-custom-templates-modules.html

  None of this is what your after?

• get the last result

  Hi all.
  My problem is that I get some it's whole purpose, as the list have only the last result for all objects in it.and I can't understand why?
  findSentanceArray-return array with sentences that make the search word.
  in this code, I want to get all the phrases that contain the keyword with the keyword.
  In this code, I get double of the last result screen...
  My code is:
  

  ArrayList<listModel> list = new ArrayList<listModel>();
  listModel listModel=new listModel();
    
  
  this.model=model;
  
     listModel.setListModel("cpu",findSentanceArray(text,"cpu"));
      if (!listModel.sentence().isEmpty())
       list.add(listModel);
  
    listModel.setListModel("screen",findSentanceArray(text,"screen"));
        if (!listModel.sentence().isEmpty())
       list.add(listModel);
  
  
  
   public class listModel{
  public String  attribute=new String();
  public ArrayList  sentence=new ArrayList();
  
  public void setListModel(String  attribute,ArrayList  sentence){
  
  this.attribute=attribute;
  this.sentence.clear();
  this.sentence=sentence;
  }
  public ArrayList sentence(){
  return this.sentence;
  }
  }
       

  Thanks for the help

  I can only see you create a listModel. A common misconception in the subject list.add (e) is there a copy of e, and you can use it again to create another copy. But all this is add a reference to this object to the list. If you call the add() method again it add another reference to the same object and you can end up with many references to an object.