After the merger of 7 shots in panorama, it took about 5-6 minutes to get the end result and the result had only something above 1000 pixels.

Similar Questions

• LR doesn't stop after the last updated only with force quit

  LR doesn't stop after the last updated only with force quit

  Hi peterc48702056,

  For Windows, I'd say to set the priority of the process in Lightroom as a via the Task Manager

  For Mac, you suggested to copy the catalog to the location on the desktop or another location and then, check if the problem persists.

  Kind regards

  Claes

• steps after installation of vista x 64 after the computer had vista x 64

  is there a quick way to install all the drivers, after putting in a vista OS again, because the old vista unable to load it on the computer? I have a dell 1545 and went to the pilots and page download and downloaded all the drivers, but I'm still not able to put zune on my computer applications. also I used the update of windows updates, but they do not help all because new updates continue to happen whenever I use my computer even after I have install all. Help, please. Thank you

  Hello

  Reinstall recovery Dell should activate auto

  all your 3rd party hardware drivers come from Dell, except if you have installed additional hardware

  in this case get them form the hardware manufacturer's Web site

  problem with Zune, you should ask in the Zune Forums

  http://answers.Microsoft.com/en-us/Zune

• Desktop computer drive HARD problems, won't load after the splash screen only in black

  Hi, I hope someone here can help me. I have HP Pavilion dv2000 laptop I had for nearly 4 years. These last 4-6 months I get questions such as getting the BSOD (usually unmountable_boot_volume) and excessive delay/hanging while working. I was able to fix these with chkdsk and sfc since no virus was detected. But I couldn't make the successful restore points as they always disappear.

  But last night I forced him to close due to the hanging again and rebooted, it upward to get "a disk read error has occurred. Press ctrl + alt + del to restart"only to receive the same message again. Not far enough, he won't do a chkdsk or sfc. So I went to use my bootable usb key with a recovery console to run chkdsk, startup repair and sfc. He managed to get through the bios and was able to connect to my computer, but it would not load the office. It's just a black screen with my cursor. Going even in safe mode it will appoint the task bar, but soon, to get an error "windows Explorer has stopped working".

  I don't know what to do anymore. It would be great if I can just get into my HARD drive one last time. I've saved most of my files knowing he would die on me, except a few files and just need to run once more to save them. Would appreciate any help, please!

  Hello

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-boot-disk-startup-disk-and-why-would-I-need-one

  Method 2:

  If the previous step fails, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  You may be able to save files if you are able to use system restore tools. Follow the steps in the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  If you can not view files by using System Restore hard drive is dead

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• Dead laptop after the BIOS update. How can I restore original BIOS?

  Model: HP Pavilion m7-1015dx

  Original OS: Windows 7

  Current operating system: 64-bit Windows 8

  Problem:

  I tried to update the BIOS by using this file:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124651-1&cc=us&DLC=en&LC=en...

  Release: 2013-10-08
  File name: sp63801.exe [1/1, 6.56 M]
  Version F.29

  He gave me a Blue Screen of Death and the computer restarted. After the restart I only get a black screen, the fan comes on but there is no text and no way to access the BIOS, or the start menu.

  The led caps lock starts to blink twice, then stops for 1 ~ second then blinks twice again and again, indefinitely. This, according to HP, suggests a failure of the BIOS Corruption.

  What I tried:

  I do not have the HP recovery partition, so I tried to install the two update of UEFI BIOS HP SoftPAQ and HP UEFI support SoftPAQ environment on a FAT32 USB key named HP_TOOLS. I tried these tools separately, at the same time. I tried them with 3 different bios downloaded from this site. I hold the button windows and B, then turn on the computer. Nothing happens. I tried Fn and B, holding them for different periods, there are no beeps, no text on the screen, nothing. The led on the USB key blinks ten times at the beginning and then stops, then starts flashing caps lock. I tried to put the .bin file in different folders in the USB port, including the root, same result. No.SIG file is in the bios I downloaded.

  I am on mobile, excuse the errors. What Miss me?

  The message here by 'jayvastani' seems to work for many. The only thing different from his post a year ago would be to skip step 4. The rest should be all you need. Good luck!

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-use-the-HP-BIOS-update-UEFI-utility/m-p/2451463#M62022

• WebCenter content get lost after the redeployment of the application

  Hi all

  We have a portal web Center running application to our company. After it has been deployed in the production environment, a member of the admin team added some content on some pages using the Oracle WebCenter Portal administration Console. Now, there are a few requests of change that we are working on the same application. Every time we complete the change and it is deployed to the integration and Production environment, content published by the administration team is lost. They are having to redo this content on this page on any redeployment of the application. It always happens in integration / prod environment. Is there a way, that when redeploy us the application, we do not replace the content already added to the pages of the application?

  Or do we need to perform the same content in the Jdeveloper environment and produce some deployable for this be packed with deployment files? Please let us how we can resolve this situation. Thank you.

  Kind regards

  Anitha

  Hi all

  We found what was the problem that was causing the above behavior. According to the guidelines of this doc (WebCenter portal deployment: Applications Framework - 11 g Release 1 (11.1.1.6.0)), all content added to the pages, should be retained even after the redeployment. Only changes made to the navigation model must "round-trip on development." Added content on the pages after that initial deployment runtime does not "round-trip on development."

  The question was essentially in the way in which the application has been deployed. Each time, the new version was to be deployed we were not deployment out the version of the application and the deployment of the new version. Now, we have used "Redeploy" option to deploy the release. This fixed our problem. The content is now kept after the new deployment version too. It was also important to use the same MDS and Partition repository for deployment after the addition of the duration of the content to the pages.

  Kind regards

  Anitha

• Invalid objects after the discharge of the export is refreshed. How to fix?

  I made a pattern only export dump and then imported into a test environment. Now, there are about 40 invalid objects. I used utlrp.sql to make them disappear.
  
  All are deleted except a procedure owned by a user of the app.
  
  I want to recreate it, but fear there are some permissions, grants associated with this procedure.
  
  How be sure all connected with this procedure, such as subsidies, permissions, links will be recreated?
  
  Thank you in advance for help.

  846422 wrote:
  I see. You are right. Thanks for solving this problem. Any good suggestion on how to fix the invalid objects? and what is the workaround for these grants on system/sys objects? How to avoid this problem?

  someone has explicitly issued GRANT on DB exported; previously.

  The SQL statements must be under the control of application source code; like the rest of application.

  After the import run only SQL file containing all the commands necessary to produce 100% valid objects

• recover data after the update results in recovery mode

  Hello! I feel absolutely terrible and any help would be greatly appreciated. I have an old IPhone 4S that has been put into market and on himself. One of my friends told me to go to IoS9. Terrible mistake because it made my phone goes into recovery mode.

  I never did all backups on Icloud and on ITunes. Worse still, I never had ITunes in my life. (I am kind new to smartphones, this IPhone was given just for me)

  A friend of a friend has offered to help and I gave her my IPhone for a little more than 10 minutes. He has a Mac and said he could do something (legal or not, I have no idea). But then I realized that there are things really private in my IPhone that I would not want anyone other than me to see. So I asked him to stop whatever he was doing. The phone is still on the recovery mode when I got back, he had the phone for about 10-15 minutes, and I never gave him the passwords. My question is simple: would he able to access my data in any ways if he wanted to?

  I went to an Apple store and a saleswoman told me that there was no way he could have access to what in my phone as the phone was completely blocked / blocking. And then I'm going home and read things like Wondershare, on ways to get data without passwords and I completely panick on everything.  You have to be a complete genius this information?

  I guess I just need to be reassured. Thanks to you all.

  PS: I'm not English, I hope I have made myself understandable!

  If the phone goes into recovery mode, restore only on a new version of the iOS will be bring back to life.

  The password for the lock screen can't be changed if restore you to a computer that was used to put in place or to sync the phone in the past. Other computers cannot access the data on the phone, he's going to be wiped out during the installation procedure. If you never connected to a computer, the first time that you try to synchronize, the phone will be erased, over, synchronization, it will take the password of the lock screen to display on the phone.

• How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work

  How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work. I would have the size as a Properties window opens. It was about 12 tabs for different frunctions. «Please help me someone...» I would be grateful! »

  Hi Aldo,.

  What is the manufacturer, brand and model number accurate and complete from your computer?  What is the manufacturer, the brand and model of your keyboard?  We can not help you without more information on your specific computer.

  If you want to go faster, simply contact the Group technical support from the manufacturer of the computer or go to their support site and ask them or look for this issue.  If you provide us with the above information, we will go to their website and see if we can find the instructions (if we can) – and they will be able to do it faster and better than we can.  The choice is yours.

  I hope this helps.

  Good luck!

• HDR and Panorama fail after the upgrade to Windows 10

  After the upgrade to Windows 10, trying to merge pictures gives the message "unknown error occurred".  After the first attempt, I've updated my driver graphic card, and HDR worked.  But the next time, the error message reappears, and this has been consistent - if the graphics card is engaged or disabled!  My graphics card is NVIDIA GeForce GT 750 M.

  The problem turned out to be unrelated to Windows 10.  For reasons I can't understand, it is limited to one set of photos taken on a single morning. So, no problems with Windows 10.

• Internal errors and missing files after the merger of catalogs

  Hello

  I was merging two catalogs Lightroom CC on OSX 10.10.5 more often with success, however, a single folder is totally inaccessible after the merger and tries to update the location of the folder or re - import photos gives rise to the error codes internal.

  If someone could help me restore references in the catalogue that would be much appreciated.

  Please see the attached screenshots trying to update the location of the folder:

  

  And on the other hand, when you try to import photos:

  

  Thank you very much

  David

  Reinstall worked after than a cup of restarts and everything looks good now - thanks!

• Errors of control of overall consistency after the merger of the RPD: 38120 and 38015

  Dears
  
  Can anyone of you point me documentation explains check the overall coherence of the error numbers in detail?
  After the merger of 2 RPDs, it gives me the following error: 38120 and 38015
  
  Thank you

  (1) open source and Sun on the content tab to add related dimension
  If this is not the case remove dimension and recreate

  2)
  (a) search the columns duplicated for ending with #1
  (b) go to the Manager of joints and check the joins unwanted

  Let me know updates

• IDCS6 MACOSX JS: data merge multiple txt files one after the other

  Hello everyone.

  I have a situation where I have to data merge multiple text files to a single file indesign real "base". Databases formats are the same, the point of difference is a code in the second field of the database that refers to a postal box (not a zip/postal code, a code of 'distribution center' that has possibilities of 56 or greater). I would prefer data merge a file and then somehow split the PDF via Acrobat, but the length of postal areas resulting is incompatible and something that cannot be done if the document "split" feature in acrobat.

  The database starts as one massive file but using a one line code, can be divided into postal areas in separate text files.

  My last question: is it possible data merge several files at the same time (for example one after the other) and to give them their names based on the names of the input text file?

  OLE Kvern had a script to merge the data to a file without the user interface. I changed the last line slightly so that it generates a PDF file based on [high quality]:

  if(app.documents.length != 0){
          var myDocument = app.activeDocument;
          app.dataMergeOptions.removeBlankLines = true;
          //Select a source file.
          var myDataFile = File.openDialog("Select a data file")
          var exported = "file location(redacted for the sake of this post)"
          if(myDataFile != ""){
                  myDocument.dataMergeProperties.selectDataSource(myDataFile,);
                  myDocument.dataMergeProperties.exportFile(exported,"[High Quality Print]",);
          }
  
  }
  

  I guess that the answer has to do with the variable "myDataFile" and rather than just being open a dialog box, it could be somehow by selecting a table of text files, but it is where I am out of my depth.

  Ideas or thoughts which may not involve trying to do both the many mergers, but can somehow revolve around a great fusion of PDF?

  Thank you very much

  Colin

  Since writing my last response, I realized there was a better answer. It is a scenario of Peter Kahrel and a modified version of a script by Olav Kvern. Details can be found here: batch of merge data | Adobe Community

  I have since made other mods to the script is easier to understand:

  if(app.documents.length != 0){
  // make sure to use the document that is open
          var myDoc = app.activeDocument;
  // get the name of the document that is open for future naming purposes
          var myName = myDoc.name
  // get the location of the folder that contains both the indesign files and the text files
          var myLocation = "FULL PATH LOCATION OF FOLDER CONTAINING TEXT FILE AND DESTINATION FOR FINAL PDFS"
  // define the names of the data files to use based upon the names of the indesign files
          var myImport = myLocation + myName + ".txt"
  // define the names of the data merged PDFs to be created
          var myExport = myLocation + myName + ".pdf"
  // the actual engine for the merge, including DM instructions such as remove blank lines, object fitting etc.
          var myDataFile = myImport
          app.dataMergeOptions.removeBlankLines = true;
          if(myDataFile != ""){
                  myDoc.dataMergeProperties.selectDataSource(myDataFile,);
                  myDoc.dataMergeProperties.exportFile(myExport, "[PDF/X-1a:2001]", );
          }
  
  }
  

  If this script will automatically merge a file which is open as LONG as the data file is the same name as the indesign file with .txt at the end for example

  Woodward.indd (indesign file)

  Woodward.indd.txt (used for merging text file)

  This script does still not the original memory and who was using an indesign document, to browse for many text files and merging of PDF based on text files.

  HOWEVER, I am sure that the answer to that is based only on the use of the script above (no need to Peter batch convert script) and changing the line 9 to be a loop for... but again, this is where I come to a grinding halt. Any help would be appreciated.

  Colin

• Layer merged after the use of convert to RGB to CMYK profile

  Hi all

  I'm converting a drawing printed in photoshop cs5 from RGB to CMYK. My layer merged after the use of convert to RGB to CMYK profile.

  After this, I save the file and close it, and I didn't have a backup of this file.

  Now please suggest how can I recover my all layers

  I don't need that my layers back...  Please help me

  Finally you all say there is no way back...

  because I checked flattened when I convert.

  No Way Back, I'll take care of it in the future

  Thank you all