Get a message "do not answer." It gets worse every day. Nothing seems to work, including to reset.

Similar Questions

• Windows Update does not work on my laptop - I get the error C800044E. nothing seems to work.

  I ran Symantec and the removal tool malicious s/w - found nothing.  I get a similar error when I try to update the windows defender definitions.

  Hi afblue1,

  1. When was the last time you were able to install the updates on the computer?

  This can occur if windows update components are corrupted on the computer.

  I suggest that reset you the windows update components and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can barely type a sentence in email or office without the cursor jumps around. It gets worse every day! ... What happens and how can I fix it or stop?

  I can't type a paper letter or in school without the cursor jumps around. It just happened again! ... He jumps around and I have to watch very closely... he already did 3 x now, just try to type these 3 phrases! What is wrong w / my laptop? and how can I solve this problem!

  Just a guess, you could have a setting on a place where some keys move the mouse. That would be used in the case that you do not have a mouse.

  Other that I can't help you much. If you are using a desktop computer, try to unplug the mouse and see what happens. If you're on a laptop, it could be that the trackpad is having problems.

• Via HD Audio - I uninstalled my audio, without realizing that I have no sound. I know, stupid, however, that I did. How can I get that back? I tried to download but nothing seems to work.

  I uninstalled my audio, without realizing that I have no sound. I know, stupid, however, that I did. How can I get that back? I tried to download but nothing seems to work.

  VIA, as in the audio embedded... If the audio, is an expansion card, we could simply

  move the map to another location of MB (stop), xp reinstall on

  start-up... Being on board, System Restore should work. If the restoration is not an option,

  then click on run, type: services.msc services.msc in msc, scroll down to the double line audio-mfg

  Click the 'auto start' value the service starts, exit. Then, scroll down to windows audio,

  do the same as above, when to exit.

• Will be this Materialised view get updated every day?

  Hi all
  

  create materialized view employees_in_dwdb_test
  refresh fast start with (sysdate) next to_date(sysdate+1) + 9/24 as select 
  employee_id,first_name,last_name,email,phone_number,hire_date,job_id,salar
  y,commission_pct,manager_id,department_id from hr.employees@link_dwdb_hr

  Next to_date (sysdate + 1) + 9/24-> will this statement executed only tomorrow, or every day at 09:00 I gave sysdate + 1.
  
  My requirement is I want the MV to get updates every day at 09:00, is the above pretty good query?
  
  Also the opinion of Materialised above will inform every day if I don't give any option "next"?
  ex: -.

  create materialized view employees_in_dwdb_test
  refresh fast start with (sysdate) as select 
  employee_id,first_name,last_name,email,phone_number,hire_date,job_id,salar
  y,commission_pct,manager_id,department_id from hr.employees@link_dwdb_hr

  Kind regards
  
  Published by: user10243788 on May 1st, 2010 02:55

  Every day. Because if you said refresh with NEXT TRUNC (SYSDATE + 1) + 9/24.

  Select sysdate, TRUNC (SYSDATE + 1) + 9/24 double; He goes every day return you current sysdate and overnight 9.00 AM.

  Concerning
  Girish Sharma

• under windows xp... IE guard suspended and gel... did several fixes in the last week... nothing seems to work... also dns cache not rinse... someone can help please

  under windows xp... IE guard suspended and freezing... have you tried several fixes nothing seems to work... am really frustrated with this... dns cache flush... someone can help please

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  post back with the results and more info:

  brand and model of browser, OS, pc and ServicePack, current antivirus?

  What was the first question?

  Have what steps you taken?

  What are your error messages?

• I use v20.0.2 and restart using the same windows and tabs does NOT work. I deleted the profile and restarted, etc, but nothing seems to work. What now?

  Don't know what else I can give you here. This particular software function doesn't seem to work.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

  Delete the sessionstore.js file possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: see file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks).

  • http://KB.mozillazine.org/Multiple_profile_files_created

  If you use a software like CCleaner cleaning then check the settings in the Firefox application.

• I need to delete files from data store. Get the message "could not open because it was in use" How can I work around?

  9 my Windows update does not work. It is said to open "Datastore" and del; files allow you updates. When I try to open the data store in a first time, I wonder what program to use, and then said "can not open because it is used by another program."  This Windows Vista bit. I can't install Explorer 9 until I have a workaround. Help.

  Hello

  What is the exact error code or error message?

  I suggest to reset the Windows update components and then try to check updates, and then install the updates and check if it helps.

  How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Solve problems when you can not install Internet Explorer 9: http://support.microsoft.com/kb/2409098

  I hope that helps!

• Having a problem with the message saying (not answer) and computor lock, answers please

  Problem with computor saying "not responding" and lock, any ideas please.

  Problem with computor saying "not responding" and lock, any ideas please.

  Provide you any other information.  You have to give to get when it comes to troubleshooting.

  Given that don't even give you an operating system - replace the defective hardware.  ;-)

  What specific operating system you use?  Include the service pack level and architecture (SP1, SP2, SP3... (32 - bit or 64 - bit?)

  I'm guessing that has happened since the first day - of a lifetime of computers - what happened between he works and does not?  New software installed?  All new hardware installed or attached?

  Did you * nothing * to try to remedy the situation?  If so - what?

  Be specific.  Ignore the cameras, microphones and remote viewing software, we have installed in your home, clothing and computer.  Pretend that we do not understand what you do and save it for future reference.  * smile * (should be easy - we don't have).

  Stuff in general, you could do (as long as you use a Microsoft Windows Operating System after the year 2000...)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Update your drivers for hardware devices from the manufacturer themselves - do not use the built-in features of Windows. If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Windows Vista Home premium get error 80070103, code downloads, but do not install, this get almost every day since 4/09 thank you HHnyc

  my history of download/install bed failed.  brief explanation under code 80070103 error reads something like there is a new version of NVIDIA GeForce 7300LE already in place... don't know.

  Run AVG 2013 safety.  used Windows security pak 2

  any ideas?

  Hello

  If you receive the error Windows Update 80070103 while installing updates, you might be trying to install a driver is already installed on your computer or a driver that has a lower compatibility rating that you have already installed.

  I suggest you perform the steps in troubleshooting of these links and check if this solves the problem.

  Windows Update error 80070103

  Error 0 x 80070103 is displayed when you use Microsoft Update or Windows Update Web sites to install updates

  I hope this helps you solve the problem. If the problem persists or if you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• Why do I have to reset my time TPC/IP the first I get online every day?

  I have Windows Vista Home Premium on an HP Touchsmart. We use a wireless router from Cisco for the last 3 years without problem. Last week, we had to reset/repair our TCP/IP every morning during the first internet access. I used the Internet connectivity evaluation tool, and it indicates that our computer and the router are 'OK', but we have yet to take that step every morning.

  Hi PruittHVHSA,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  The problems of Internet connection

  For reference:

  Windows wireless and wired network connection problems

• I have not defined alarm goes off every day

  At 10:00, Monday to Friday, a strange alarm goes off on my phone. I checked the clock and that no alarms are defined. There is no recall for the calendar. How can I get rid of this?

  I see that you are on IOS 9.3.5, it may be interesting to update to IOS 10 with this problem.

  If this isn't an option, force restart your iPhone by pressing the power and the "home" button until the start screen is displayed.

  If it still does not please answer.

  Will be

• Vista will not start on my laptop, tried many different things and nothing seems to work

  Hello.  Before we begin, I want to say that I spent the previous two days, researching my problem and have not yet find something that describes my specific problem...

  I have a laptop Compaq Presario C700, I received my mother-in-law a few years ago.  It is installed with Vista (SP2 I believe, I can't confirm as you'll see below) and I got Vista point random other problems experienced, but I've usually been able to find an adequate solution - up to and including restoring to a previous restore point.

  Two days ago my laptop decided not to start Windows.  When I turn on the laptop, I get the usual Compaq splash showing the different options that are accessible through the F keys.  The screen then goes, after displaying the message "ready for the OS to boot".  It then goes to a white screen that displays a flashing cursor (like a prompt command, just without the drive/directory indicator).  The hard drive light flashes every 30 seconds, or so, but it is y no movement in the HARD drive that I can not hear it or feel run as I usually can.

  At this point, my first step was to use the option of recovering your system of the Compaq splash screen, but leading to the same blinking cursor and a white screen.  Then I went into the BIOS and confirmed the boot order was OK and ran the Self Test on the HARD drive and memory, which gave rise to no problems found.

  It was my first choice because, as you have probably guessed, the laptop came preloaded with Vista and my mother-in-law had no startup disk.  As a result, I found a boot/recovery iso disk for Vista SP2/SP3 and burned it on a CD.  When I boot from it, I get the initial page, offering to install Vista with a link to the System Recovery Options.

  The first option, I ran has the Startup Repair.  It only detected no problems with the commissioning.

  Then, I used the system restore option, trying to restore to each of the 7 restore points, of which none has solved the problem.

  Finally, I opened the command prompt and tried a chkdsk c: command found no problems with the HARD drive.  I didn't run the command chkdsk c:/f/r as read-only mode has not found no problem to be fixed.  I was reading a few forums different tech and found a post suggesting to try the sfc/scannow command...  I tried, you enter at the prompt like:

  X:\Sources>SFC/SCANNOW (X:\ is my DVD drive) (Oh and I am the administrator, I believe.)  The title bar of the command prompt window displays "Administrator: X:\windows\system32\cmd.exe")

  He returned "start system analysis. This process will take time. "Then, about 5-10 seconds and I get"Windows Resource Protection could not perform the requested operation ".  So I tried to change my directory to C:\ and run the same command and got the same results.  Then I tried to go to D:\ which is a small partition of my HARD drive and it ran there, with the same results.  So, I tried the following commands:

  Damaged X:\Sources>SFC/SCANNOW = c: \ /offwindir = c:\windows

  Damaged X:\Sources>SFC/SCANNOW = d:-/offwindir = d:\windows

  These are not returned the "start scanning system. This process will take some time. "message, but they returned the same message from Windows Resource Protection.

  Finally, I removed the battery, disconnect the AC adapter, pressed the power button in the hope to evacuate any overage charges into the motherboard, waited 5 minutes, plugged the adapter back, turned on and still have the same problem.  Other forums started suggesting withdrawal and re - insert RAM chips, disconnect and reconnect the drive of HDD or DVD and other hardware items that I really hope I don't have to deal with - I'm kind of klutsy when it comes to playing with the material and I really don't want to take the risk of breaking something.

  Anyone, anywhere, has all the possible suggestions?  I don't have an Installation of Vista disc, nor do I have the original product key code, so I can't reinstall Vista.  I have not the slightest semblance of Vista to load, even the F8 key to appear the option of safe mode because the laptop is never to the loading screen, so I can't try to download/install updates to windows.  What I do then, short by using the "Restore the whole PC" option in the system recovery?  If I use this option, it will scan all my files and folders or it works as the restoration system, where he erases only the updates and software installed since Vista was initially loaded on the PC?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the verification and startup repair if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• T60 will not pick up a valid ip address, driver seems ok, works fine without thread

  Hi I have a T60.

  In network device manager driver is showing that "Intel (r) PRO/1000 PL Network connection.

  but I can't get the machine to retrieve an IP address.

  I checked the network ports and they all check out ok, that is to say that they are certainly direct and giving valid ip addresses.

  I can't understand why its not working properly.

  has any one come across this before?

  I uninstalled and reinstalled the network device, but its still does not.

  Thank you

  Damien

  Hi Damien. I have a few questions for you here:

  (1) when you connect the ethernet cable, you see both the Green and orange lights flashing? If all goes well it is not a problem with the internal pins on your NETWORK card or a problem with the configuration of the router or the cable itself.

  (2) in addition, go to the shell (start-> Run-> CMD-> Enter) prompt and type the following for me:

  Ping 127.0.0.1

  Let me know if you see 4 answers with 0% loss

  Then, type the following at the shell prompt:

  ipconfig

  Type the shown static results. Need to see the IP address, subnet mask and gateway showing.

  I check to see if there are problems of configuration first. You can of course also use the release and renew orders and empty the DNS if necessary. Winsock reset possible too help?

  If everything looks normal and the problem persists, you want to consider getting the motherboard replaced. Systembords can act funny at times (especially with the integrated NETWORK card). This should solve the problem, Yes... but just do some it do not configure the questions first.

  Let me know if that helps you at all.

  Best,

  Mark

• I can't answer received no Apple users iMessages. He used to work, but suddenly it doesn't. I checked all my settings, but nothing seems to work. Help!

  I can't answer received no Apple users iMessages. I checked all my settings and they seem to be set correctly, it has occurred a random recent request to resign in my Apple account. Initially it would not accept my login iCloud, but then he did, and this problem occurred.

  I had a similar problem, in that all messages have been through imessage.    Originally thought it was my mobile phone provider, after a diagnosis on my framework of contacts, is found there is a huge reliability issue in all the rounds of iOS 9 (I have several devices on the different versions of 9).    Before the 9.2 update, I got a lot to reallocate iMessages on the end of contacts (although I might receive).    Contacts have called, I was wondering why I didn't answer.  Here's how I discovered.   Shut iMessage on your iPhone and the text now.  SMS works completely. iMessage is totally reliable.