Windows Vista Home premium get error 80070103, code downloads, but do not install, this get almost every day since 4/09 thank you HHnyc

Similar Questions

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• Windows Vista Home premium all-in-one is downloadable windows 10

  Windows Vista Home premium all-in-one can download windows 10 and run it because I have a windows vista Home premium service pack 2.

  Information system

  

  I've heard rumors that you can download windows 10 on windows vista and I don't know if its true or not but I also people saying that windows gives 10 free windows for windows vista and windows XP

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

  I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

  original title: error code 80070005

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Windows vista home premium displayed "startup initialization failed" recovery/repair could not fix

  Gateway Laptop preloaded vista home premium displayed "startup initialization failed" launched the recovery/repair utility and was not able to repair.  now when you start the computer it will launch recover through process then the screen from windows with dots streaming on bottom is gets.   matter of fact that the screen is still and only way to stop it is to unplug the power.  a recommendations there...?  friends computer so HELP!

  E-mail address is removed from the privacy *.

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• Windows Vista home Premium update error

  I continually get an error Code 80080005 when you try to update windows. How can I go about fixing of this please?

  Hi lepaknitram,

  Thank you for using Microsoft Vista answers Forum.

  Try the steps mentioned below:

  * Copy / paste commands in a Notepad and save the file as "Resolution.bat" on your desktop below.
  Run the file to run the commands.

  ipconfig/flushdns
  CD %windir%\System32
  del /s *.chk; *.RIP; *.tmp; ~ *. *
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  departure of eventlog sc config = auto obj = Localsystem
  net start eventlog
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv
  D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = DEMAND obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  rmdir /s /q %windir%\system32\catroot2
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  cd\
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  output

  * After the execution of commands, try to perform a Windows Update, if you are still having the same problem, then:

  First, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

  * Check if Windows Firewall is blocking the update of Windows.

  * I suggest you to disable Norton and Windows Defender as well, because sometimes there are opportunities to Windows Defender blocks the Windows updates.

  Please see the following article for connection errors:
  http://support.Microsoft.com/kb/836941

  836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

  Let us know if it helps.

  Thank you and best regards,
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to unzip a file I have by default Adobe Reader, which is the wrong program. I have Windows Vista Home Premium. I need to download a software to compress and decompress compressed files?

  I run Windows Office 2007. And find that when trying to extract a .zip file, I get Adobe Reader who tells me to can not read the file (of course). So, where's the decompression of files program. I need to download one?

  Hello

  1st 3 here should fix you up

  How to restore Vista built-in ZIP files Support
  http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html
  How to enable or disable the files compressed in Vista
  http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  ---------------------------------

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  How to restore files ZIP integrated into Vista Supporthttp://www.vistax64.com/tutorials/65254-zip-file-support-restore.htmlHow to enable or disable the compressed foldershttp://www.vistax64.com/tutorials/93827-zip-file-compressed-folders.html
  Restore and return the file Association in Windows Vista if Original
  http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/

  Reset and Fix Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS, ZIP, LNK,
  Folder, drive)
  http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista Home Premium activation error (invalid key)

  Can someone help me with the error in question? I put the key provided in the book, and always I have an error to activate.
  Kind regards

  Renato.

  I agree with snipe; the key at the bottom of the device is only for the OEM version that has been delivered with the laptop recovery CD! You can't use it with any other Windows CD!

• How can I get a valid Windows Vista Home Premium product key for my Acer Aspire 5050?

  My hard drive failed in my Acer Aspire 5050.  Replaced, reinstalled Windows Vista Home Premium with the appropriate product key, but Microsoft says that it is invalid.  Microsoft wants to buy me a new copy of Windows & there is no available from Acer for my laptop recovery disk.  What can I do?

  The product key on the bottom of the laptop is an OEM product key.  This product key does not work for the commercial versions of the operating system.  The original shipping charge might work on the system without entering a product key.

  If you did not, or are no longer able to get the recovery media, you will have to buy an operating system of your choice for the installation.

  Please see this link:
  http://community.Acer.com/T5/community-KB/installing-a-different-operating-system/Ta-p/48739

• Why not the Acer Empowering Technology for the launch of Windows Vista Home Premium SP2?

  Hello!

  I have Windows Vista Home Premium SP2 in an Acer Aspire 5920 G I installed Acer Empowering Technology, but the program does not start and a message that a problem caused the program to close and Windows will advise you if a solution is found.

  Help please.

  Thank you!

  Hello

  As software Acer Acer Empowring Technology, you will need to contact Acer directly on this problem with their software:

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• I have a Windows Vista family 32-bit premium install windows vista Home premium. Now I have no sound.

  I have a family vista premium 32-bit install windows vista Home premium. now I have no sound

  I have a family vista premium 32-bit install windows vista Home premium. now I have no sound

  Huh?

  Try to understand, taking the repeated mention, I guess you're saying that you have Windows Vista Home Premium (32 bit) and you do not have any audio.

  Have you spent at the web page of the manufacturer of your computer support and their section downloads & drivers and got the last audio/HiFi drivers for your specific hardware?  They are those who produced and load of the equipment.

• My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?

  My computer has Windows Vista Home Premium 64 - bit operating system.  When I try to get updates, there is an Error Message Code 8000 ffff.  How fix/resolve this problem?

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
  http://support.Microsoft.com/kb/946414

  How to reset the Windows Update components?
  [Launch the difficulty mode by default and aggressive , if necessary]
  http://support.Microsoft.com/kb/971058
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.

  Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.  Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs.  Have the free version of Malwarebytes, run regularly, nothing comes.

  Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix