get a new copy of the DVD?

Similar Questions

• Error: "C:\Program Files/reviversoft\Registry Reviver\unins000.msg"is missing." "Fix the problem or get a new copy of the program.

  Original title: cannot start computer

  Cannot start computer

  This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?

  Hi Dan Maarsman,.
   
  -Did you change on your computer before this problem?
  -Do you have any third party registry cleaner program installed on your computer?
   

  Start your computer Safe Mode and check if you can successfully start.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  For more information, see:

  A description of the options to start in Windows XP Mode

• I get this message on my desktop - the Setup files are corrupted. You can get a new copy of the program.

  "The Setup files are corrupted. You can buy a new copy of the program"Hi, I get this message on my desk. I am running w/7-Ultamate with 8 GB of ram and a 650 GB hd. Any idea on how to fix this? I wake up in the morning and there are at least a dozen of the error messages.
  Thanks Jim

  Original title: the Setup files are corrupted

  Hello

   
   
  1. What is the full/exact error message?
  2. When you receive this error message?
   
   
  Follow the steps.
   
   
  Method 1
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
   
   
  Step 1
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
   
  Step 2
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
   
  Perform the virus scan and make sure that your computer is virus-free.
  
   
  Method 2:
  Run Microsoft Online Scanner.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
   
  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.
   
  Also run a scan complete with Microsoft Security Essentials, check out the link.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
   

  For further assistance, post back with display of the event logs. Check out the link.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Response with more information to help you.

• HOW CAN I GET A NEW COPY OF THE VISTA INSTALLATION DISC?

  SON HAS INSTALLED AN OLDER VERSION OF TEST OF WINDOWS 7 AND ITS A MESS AND I CAN'T FIND MY INSTALLATION FOR MY VISTA HOME PREMIUM DISC. ANY HELP?

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 'C:\Program Files\Kroll Ontrack\Ontrack Home10\unins000.msg of EasyRecovery' is missing. Fix the problem or get a new copy of the program.

  Hi all

  I'm trying to uninstall the application from my laptop get above error.

  Help, please.

  Kind regards

  Irfan

  Reinstall the application, and then uninstall it

• The installation files are corrupted. You can buy a new copy of the program

  Whenever I try to install a new software or games and then permanently in error "the Setup files are corrupted. You can get a new copy of the program.

  Please help me...

  first scan your computer entirely with good antivirus.

• Can I get a new copy of Windows Vista?

  Hello

  I'm fixing a PC from one of my friends, unfortunately it has formatted the C drive (I guess he thought it was a good idea?). Anyway, he doesn't have his original copy of windows vista that came with the PC, but the product key is on the side of the tower. Is there a way to get a new copy of vista that works with the product key?

  Any help is appreciated.

  Thank you!

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• "Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the creative cloud "."    Then on the new facility to download. the process stops and repeats this message...

  I get the error message ' Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the creative cloud '.    Then on the new facility to download. the process stops and repeats this message...

  

  Hi Jory,

  Run the first CC cleaning tool to remove Adobe Creative cloud completely from your machine.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Once it is completely removed, you can download the installer from the help below document:

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Kind regards

  Sheena

• How can I get a new category in the list?

  I have included a number of events of the churches, using the calendar in Thunderbird, but whenever I have to add 'Church' as a new category, even if I already added. How can I get a new category in the list? It might also be useful to be able to get rid of the categories that I'm probably not want. Is this possible?

  When you add the new category?
  If added to the event entry so it is an addition of time.
  You go to Options-calendar-categories and add is there to be a permanent choice. There is also a button to delete it.

• New copy of the table when move to the Subvi?

  If you pass an array to a Subvi without treatment on the inside, it will produce a new copy of the array. Thank you.

  New copy will not be created if you just pass the array but incase if you use a shift within the Subvi register, then a copy will be available at the node level.

• I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system? It is not working properely

  I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system?  It does not work correctly

  See http://acer.custhelp.com/app/answers/detail/a_id/2631/kw/factory%20restore%20windows%20aspire%20one/related/1

• Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html.

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.

• This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. On my Mac.

  
  

  I tried to uninstall and reinstall

  
  

  Help, please!
  

  What version of Mac OS do you have? I guess it's 10.6.8 which is not supported by the App Builder. You need to update to a newer version of Mac OS.

  Neil

• How can I get a new copy of restore disks?

  My computer (VPCCB290X) have experienced many problems after an update of Windows, so I decided to restore from the 4 disks created after the purchase of the computer. Sometimes Disc 3 and resignations, saying a necessary file is not found or the media is corrupt. When I use F10 to enter VAIO care restoring, she leaves immediately, saying only that an unexpected error has occurred.

  I would like to receive a new copy of the restore discs, so I can use my computer. Please let me know how to do.

  Hello Tryfailtry, please follow the link to contact the team of accessories so that you can buy the discs

  http://esupport.sony.com/US/p/support-contacts.pl?mdl=VPCCB290X. Thanks-Bob