Get active sequences or selected sequences

Similar Questions

• Active sequence shown

  Hello

  There is an application that uses the TestStand UI.

  Starts the main sequence and a parallel sequence called later and this is reflected on the front panel of the user interface.

  Is it possible to define the steps of the sequence that are displayed on the user interface?

  For example "active sequence" on the front panel?

  Thanks in advance.

  István

  I think that the simplest solution would be to disable tracing for parallel step.

  Pulido Technologies LLC

• I wonder how I can put video into the second video track of the active sequence.

  any function or API?

  I want to make a button that can when I put a file(mp4 or jpg), start time and duration, the clip to replace the second video track of the active sequence.

  (It's so easy with the mouse! )

  importFiles: function() PProPanel\jsx\Premiere.jsx could not help me

  just important.

  Could you help me or give some advice?

  Sorry, there is no supported APIs to do. You're not the first to ask.

• While performing a clean installation of Windows Vista, I get to the part "select driver to be installed" but there is no driver. What is going on?

  Select the driver to be installed problem during installation (Vista 32 bit)?

  So, I finally managed to get my office to start the disc because im trying to do a clean install because my family somehow acquiring an infection of Hadily on it. However as soon as I get to the part "select the driver to install" installation my computer comes up with nothing = / I scanned the Boot(x:) et le disque local (c), but it says that there is no drivers are found to install.) I don't understand what is happening? shouldn't the disc have everything you need? I was told "to put versions textmode of my SATA interface on a Flash DRIVE or a CD driver" but I don't know how to do this.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  It will be useful.

• How to get active Document?

  UIDRef docUIDRef = GetDocumentUIDRef (widget); Result: fDB = 0x05ccc310, fID = 1

  InterfacePtr < IDocument > document (docUIDRef, UseDefaultIID());

  Happen error:

  __vfptr = CXX0030: error: expression cannot be evaluated

  But I opened the file in the sdk, it's ok.

  IdFichier fSysFile;

  FileUtils::PMStringToIDFile ("D:\\test.indd", fSysFile);

  SDKLayoutHelper layoutHelper;

  UIDRef docUIDRef = (fSysFile) layoutHelper.OpenDocument;

  InterfacePtr < IDocument > document (docUIDRef, UseDefaultIID());

  How to get active Document?

  Thank you

  You can use the ILayoutUIUtils to get a reference to the current document. The code would be as below

  iDocument * iDoc = Utils()-> GetFrontDocument();

  -Manan

• If I get the user to select a location in a drop-down box

  If I get the user to select a location from a drop-down list (Atlanta, Orlando, 14 sites in total, etc.), then I want to write the address of this place in a text field which is the best way to do it I tried several if statements and did not get good results. any suggestions?

  Here is the code I use... It retrieves the value of Location_1, and then returns the address

  var Location = this.getField("Location_1").value

  If (Location = "Atlanta") {}

  Event.Value = "Barnes HC - Atlanta \n 2030 Powers Ferry Rd Atlanta, GA 30339-5016 \n \n 678-627-0077 \n";

  }

  If (Location = "Birmingham") {}

  Event.Value = "Barnes HC - \n \n 120 Oxmoor Blvd Homewood Birmingham, AL; \n \n 35209-0000 205-667-9193 \n ";

  }

  If (Location = "Crestview") {}

  Event.Value = "HC - 2207 Crestview\n Barnes S Ferdon Blvd\n Crestview, FL\n 32539-8458\n 850-683-0888\n O2 Lic # ';"

  }

  If (Location = "Dothan") {}

  Event.Value = "Barnes HC - Dothan\n 3236 West Main St, Suite 1 & Dothan, AL\n 36301-4130\n 334-671-1027\n 2\n";

  }

  If (Location = "Gainesville") {}

  Event.Value = "Barnes HC - Gainesville 1700 NW 80th Blvd. \n Gainesville, FL 32606-9177 \n \n 800-825-1733 \n O2 Lic #"; "

  }

  If (Location = "Jacksonville") {}

  Event.Value = "Barnes HC - 3728 Philips Highway, Suite Jacksonville\n 32\nJacksonville, FL\n 32207-6840\n 904-301-1050\n O2 Lic #";

  }

  If (Location = 'Panama City') {}

  Event.Value = "Barnes HC - 2425 City\n Panama Martin Luther King Jr\n Panama City, FL\n 32405\n 800-434-0822\n O2 Lic # ';"

  }

  If (location = "Tallahassee") {}

  Event.Value = "Barnes HC - Tallahassee\n 2524 Cathay Court\n Tallahassee, FL\n 32308-4248\n 800-464-8455\n O2 Lic #";

  }

  If (Location = 'Tampa') {}

  Event.Value = "Barnes HC - Tampa\n 5483 waters Ave, Suite 1200 N\n Tampa, FL\n 33634 813-888-7607\n 1205\n O2 Lic # ';"

  }

  If (Location = "Tifton") {}

  Event.Value = "GA\n HC - Tifton\n 2201 US Hwy 41 N unit K\n Tifton, Barnes 31794 - 2754\n 866-876-9114\n."

  }

  If (Location = "Valdosta") {}

  Event.Value = "Barnes HC - Valdosta\n 200 S Patterson St\nValdosta, GA\n 31601-5621\n 800-422-5059\n";

  }

  If (Location = 'Waycross') {}

  Event.Value = "Barnes HC - Waycross\n 2875 Knight Ave\n Waycross, GA\n 31501\n 866-284-9190 \n";

  }

  currently I have this under the field Calcualation of the text box, I want it written on. Is there a way to better / easier to do this?

  I need to write the field like this:

  Barnes, HC - name of the location

  Address 1

  Address 2

  City, State Zip

  Phone

  O2 Lic. #

  Sorry, it's so long. Thanks for any help.

  SOLVED used if (location is "Locationname") instead of a single "="

• Was not able to get any drive on select disk/LUN

  VSwitch1 installed and configured, VMkernal and a NIC for iSCSI. I wasn't able to get any drive on select disk/LUN. Please read the attachment and give a guggestion.

  Thank you!

  George

  See http://www.starwindsoftware.com/images/content/StarWind_ESX.pdf , starting on page 22.

  André

• Table (ADF 11 g) does not get updated on the selection of lines...

  Hi all
  
  I have a table element (ADF 11 g) in my page with the selection of multiple lines. I have my own row selection listener. Whenever I have select several lines with the CTRL key, the table is getting updated. It is fetching the data again for each selection. I don't want the table to get updated whenever I select a line. In the im listener manually selected do the line current. The code below is the table row selection listener.
  
  public void tableRowSelectionListener (SelectionEvent selectionEvent)
  {
  Add the code in the event here...
  String tableRowSelectionListener = "tableRowSelectionListener";
  Table richeTableau = (RichTable) selectionEvent.getComponent ();
  Set of keys to RowKeySet = table.getSelectedRowKeys ();
  Txn_id = number ((Number) ((Key) ((List) keySet.toArray () [0]) .get (0)) .getAttribute (0));
  int noRowsSelected = ((List) keySet.toArray () [0]) .toArray () .length;
  Rank [txnrows] = null;
  if(noRowsSelected == 1)
  {
  PscTransactionsViewImpl txnVO = (PscTransactionsViewImpl) amImpl.getPscTransactionsView2 ();
  if(txnVO!=null)
  txnrows = txnVO.findByKey (new Key (new Object [] {txn_id}),-1);
  If (txnrows! = null & & txnrows.length > 0)
  {
  SelectedRow PscTransactionsViewRowImpl = (PscTransactionsViewRowImpl) txnrows [0];
  txnVO.setCurrentRow (selectedRow);
  }
  }
  }
  
  How to select a row in the table easily (without the table is refreshed). ?
  
  Thanks in advance,
  Swathi

  Hi swati,

  Set property of 'changeeventpolicy' on 'none' & 'useRowHints' to 'default' for the list that you iterate.

  YP.

• recovery - request to get next sequence archive # to apply

  Hello guys,.

  I'm working on a database of Eve by script and I need to get the next archive sequence # to get it back.

  When I run the recovery database he knows who is the current change # and what is the next sequence archive #.

  SQL > restore database using backup controlfile;

  ORA-00279: change 5634463917 at 11/05/2015 September 02:13:50 needed for thread

  1

  ORA-00289: suggestion: /u01/archive/archive_1_142116_848080349.arch

  ORA-00280: change 5634463917 for thread 1 is in sequence #142116

  
  

  I just need a query for change # or the sequence #.

  Any help will be appreciated.

  Thank you.

  Jonas

  Hi John,.

  I think I got it.

  Select sequence #.

  v $ archived_log

  where first_change # in (select min(change#) from v$ recover_file);

  Don't know if this is the best way, but seems to work...

  Thanks for your help.

  Jonas

• Get the sequence settings...

  Hello

  I use LabVIEW to create my custom OI. I already managed to load and run a chosen sequence.

  What I want to do now is to get and, possibly, set each parameter (name, value, type) sequence listed in: 'Sequence Manager'-> 'Variables'-> 'settings '. I want to this after the loading sequence and before we do work... but I don't know how!

  Suggestions?

  I think the appropriate solution might resist the following link:

  http://digital.NI.com/public.nsf/WebSearch/5C08014017AA895686256DD6008323FB?OpenDocument

  Concerning

• How to get the sequences to be visible in the timeline

  Footage on the timeline are somehow not appearing, I don't remember something I shouldn't have, then what should I do to correct the changes and reset the default settings? Preview of the timeline screen is simply blak for the scroll bar hovering in the clip
  

  It looks like your images are trimmed to be one frame in duration. Your sequence also shows a duration of 1 master and the playhead is at 00:01 - which means that the playhead is at the end of the sequence, and by design, black list. I think that if you select the program monitor or timeline panel and save an image, you will see the image. And if you zoom in the timeline, you'll see a single track to lasting 1-framework element.

• How can I get my sequence to start at a different time then 0?

  I want my script to start at 58.39.28, how could I do?

  If you look at your chronology of the sequence, on the upper right of this window there is a small button that looks like a triangle (sorry I can't post a screenshot right now) and a few lines. Click that, then click on 'Start Time'. You can enter the time code, that you want the sequence from.

• How to get a sequence value OFA page

  Hi all
  
  I created a page of insertion, to generate the AutoNumber to supplierid created a sequence in databse.but dnt know how to call a sequence in the OPS? Please help me.
  
  Robet
  
  Published by: robet Larson December 3, 2010 17:06

  Hello

  Ramya Latha says:

  I created a page of insertion, to generate the AutoNumber to supplierid created a sequence in databse.but dnt know how to call a sequence in the OPS?

  For a sequential:

  Import oracle.apps.fnd.framework.server.OADBTransaction;

  OADBTransaction tr = getOADBTransaction ();
  ID = TR.getSequenceValue ("id_seq");

  Concerning
  Meher Irk

• I need to download my previous purchase of CS6 Adobe on my new PC.  I have the old activation sequence but I need help to download sice, I don't have the DVD?

  Need help in downloading my previous purchase of CS6 on my new PC?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  IF Windows 10 read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Get the sequence draft resolution and framerate

  IM an ExportController sample project, how can I get that values, resolution resolution height width and framerate?

  Hi Alex,

  This is illustrated in the example using the following lines of code:

  sSequenceInfoSuitePtr-> GetFrameRect (timelineInfo-> mTimelineID, & frameRect);

  sSequenceInfoSuitePtr-> GetFrameRate (timelineInfo-> mTimelineID & ticksPerFrame);