Similar Questions

• If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

  If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

  What is the attachment file extension? If you know what program should open with, just do the following.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: The appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

  How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

  Updates are not related to series numbers, so you must have done something compared to try to use an upgrade rather than an update.  Adobe not revise older versions of their software to adapt to the latest hardware/devices.  They create/sell new versions of their software for it.  If you subscribe to the Cloud at some point you shouldn't have a problem with the software becomes obsolete.

• I try to install Captivate on my computer, but I get an error that this product cannot be installed on a 64-bit system

  I try to install Captivate on my computer, but I get an error that this product cannot be installed on a 64-bit system...

  Not continue where to go from here?

  Hi Maurice.

  Thanks for the answer, I believe, a 32-bit operating system. I ended up searching on Google I found a download for 8 Captivate for 32-bit, but I can't find 9 Captivate to download 32 bit...

  Adobe - Adobe Captivate Support Center: downloads

• Error for this user account details can only be updated through the site where it was created first

  I get this error will receive try to put in place a new email: "Details of the error for this user account can only be updated through the site where it was created first."  What should I do?

  My email is down.  If you respond by email please send it to [email protected]

  Thank you

  Rick

  All sorted

  Thank you very much for your help

  2014 12-15 10:04, Anshul.sharma wrote:

  ERROR FOR THIS USER ACCOUNT DETAILS CAN ONLY BE UPDATED THROUGH THE SITE WHERE IT WAS CREATED FIRST

  created by Anshul.sharma in going live (Emails, users, domains) - discover complete discussion

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• We get an error in this selection

  Hello
  
  I am getting an error on this selection
  
  Select add_months (to_date ('31 - MAR-' |' to_char (to_date('31-Mar-2011') ',' YYYY'))-12) of the double
  
  Kindly help!

  do you want this?

  SELECT ADD_MONTHS(
     TO_DATE('31-MAR-'||
             TO_CHAR(
                 TO_DATE('31-MAR-2011','DD-MM-YYYY')
                 ,'YYYY')
              ,'DD-MM-YYYY'),-12)
          from dual
  

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate

• CS4 Design Premium I migrated to my new laptop, but when I try to enter in InDesign or Illustrator, I get message "license for this product has stopped working... error code 150:30.

  CS4 Design Premium I migrated to my new laptop, but when I try to enter in InDesign or Illustrator, I get the message "a license for this product has stopped working... error code 150:30" how to re-enable programs CS4? Thank you.

  Could you please check the solutions:

  1. License for this product has stopped working error 150:30
  2. Error: "License has stopped working". Mac OS
  3. Error: "License has stopped working". Windows

  Concerning

  Stéphane

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

  Should I re - publish so that else soeone looks like?

  If you wish.
  Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

  Alternatively, you wait for the next person coming.

  The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• getting the error for queries

  Team dear community,

  I made two requests yesterday for which I am getting following error.

  Not found

  The item does not exist. It may have been deleted.

  Not sure why this happened.

  Here's the URL for queries

  1. https://community.oracle.com/message/12927951#12927951

  2 https://community.oracle.com/message/12928209#12928209

  rukbat wrote:

  Had you tried to post your questions about 24 hours earlier?

  You seem to be a new Member of these forums

  He was be a flood of spam that the moderators have faced this moment here.

  All new messages by new users of the forum are filtered through a queue of inspection and your posts have been neglected and buried among the flood of spam.   It is possible that positions have been purged while the spams have been served.

  Already mentioned that

• Get "authentication error" for a device that is not in the OME

  Hello

  I'm really stuck here. We have over 15,000 "authentication failure" for a device that is not listed in the section "devices." That's why I'm unable to remove this device. The alert is displayed with the ip address that points to a live device (Equallogic member).

  Here's what I've done so far:

  When I try to "ignore this device only" I get an error saying that there is no mechanism for this alert. When we look at the device ID in the database table is displayed as -1

  The goal is to have the reporting of Equallogic in OME and when I add the Group and the Member (which is using this ip address) the device adds ok. But the Alerts continue to occur (showing the correct DNS name this time).

  I then removed the discovery range devices but alerts keep coming (with ip address).

  So for me, it looks like this device got stuck somewhere in the OME and is accessible, although there is no device. But I don't see it came from. These alerts are just a pain and I need to find a way to get rid of it.

  Please is - can anyone enlighten us in this strange behavior. We are on OME 1.2.0.3441

  Thank you

  Thorsten

  Hi Thorsten,

  Well I can confuse or missing some subtle detail here.

  When it comes to SNMP alerts, OME don't communicate with the target, the target device sends an alert to OME.  So if OME Gets a rogue alert in the alert/event console, this is because the device is pointing to the OME IP for sending traps.

  You looked at the target device SNMP parameters itself?

  THX

  Rob

  (Sorry if I'm being dense and not your question)

• I keep getting "the certificate for this server is invalid" for all SSL web sites.

  Since the upgrade to Mac OS Sierra I get certificate errors on my Mac Pro to the end of 2013.  It will work fine right after a reboot, but then it will start refusing to open all web sites that use SSL.  In this case until I restart, then it kinda good.

  I thought it was some kind of problem caused by the application of update after update to the Member, then I've completely erased from the hard drive and reinstalled Sierra fresh. And now the issue of the certificate is back.

  Anyone else having issues like this?  Anyone know of a fix?

  Do you have a third party anti virus or other applications that claim to protect, manage, clean, etc. from your computer? If so, uninstall them. Do you get the same message when you are using another browser?

• Getting the error for bind variables

  Hello Experts;

  SQL > DECLARE

  2 l_eid number;

  3 l_name varchar2 (30);

  4 BEGIN

  l_eid 5: = 1000;

  6 select name from l_name tab1 where it = l_eid;

  7 l_eid: = 9999;

  8 select name from l_name tab1 where it = l_eid;

  9 l_eid: = 299999.

  10 select name from l_name tab1 where it = l_eid;

  11 * END;

  /

  PL/SQL procedure successfully completed.

  When you create variable bind I get the error message:

  SQL > variable number b1;

  SQL > exec: b1: ='select name from which no = tab1: b1';

  START: b1: ='select name from which no = tab1: b1'; END;

  * ERROR at line 1:

  ORA-06502: PL/SQL: digital or value error: character of number conversion error

  ORA-06512: at line 1

  If you want to use variable bind you:

  number variable b1

  VARCHAR2 (30) variable b2

  exec: b1: = 1000;

  Start

  Select name

  in: b2

  of tab1

  where = none: b1;

  end;

  /

  print: b2

  For example:

  SQL > variable b1 number
  SQL > b2 variable varchar2 (30)
  SQL > exec: b1: = 7839;

  PL/SQL procedure successfully completed.

  SQL > start
  2. Select ename
  3 in: b2
  4 of PEM
  5 where empno =: b1;
  6 end;
  7.

  PL/SQL procedure successfully completed.

  SQL > print: b2

  B2
  --------------------------------
  KING

  SQL >

  SY.