Get appcrash on Spiderman 3 - stopped working

Similar Questions

• When you use "corel video studio pro X 3" and I'm trying to burn a video to a dvd I get a message error "program stopped working" "»

  My computer has vista and when you try to burn a dvd using the video editing software "corel video studio pro x 3" I get a message error "program stopped working" with the details below; "."

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: BurningApp.exe
  Application version: 1.0.0.50
  Application timestamp: 4ba12d57
  Fault Module name: ulaacdec.dll
  Fault Module Version: 2.0.0.4
  Timestamp of Module error: 4ba13562
  Exception code: c0000005
  Exception offset: 0000cc79
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 3081
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Please help, it makes me crazy!

  Hi dmoz74,
   
  1. have you tried to burn the DVD using any other program?
   
  We recommend first to restore the Corel Video Studio to its default settings and check the result. To restore the factory settings, see this article to restore the settings
  If the problem persists, we recommend to uninstall Corel video burning software, and reinstall it correctly.
   
  For additional assistance, please contact to Corel support team
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• My Lightroom worked the perfect time, but today when I start the program I get a message "Lightroom has stopped working".

  My Lightroom work all the perfect time, but now when I start the program I get a message "Lightroom has stopped working".

  I use Windows 7 pro SP1and Photoshop and Lightroom CC. I think that it is a more recent version.

  Yes, I use the administrator account

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• When the computer is started, get error message sistray has stopped working

  Original title: sistray has stopped working

  When I start my Pc, I get a sign that says "SisTray stopped working" and something like windows are looking for solutions, but whenever I turn it on, just the same sign. What should I do?

  Thank you.

  Hello

  1. what operating system do you use?

  2. don't you make changes to the computer?

  Method 1: Check in safe mode and the clean boot

  For the open procedure the computer in safe mode, open the site mentioned below:

  Start your computer in safe mode.

  http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode.

  If the problem does not persist in safe mode, try to start your computer in a clean boot.

  For the procedure to place the computer in a clean boot, open the site mentioned below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Method 2: Update the video driver

  Update driver by following the steps in the site mentioned below:

  Update a hardware driver that is not working properly.

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

• I get an error message "Winrscmde stop working," his major slag causing in my cpu.

  Original title: Winrscmde stop working

  Hello

  I get this error message and its major slag causing in my cpu.  I've read all the threads and I don't see a direct determination to this problem, one had this and were u able to clear it up?

  Hello

  1. when exactly you receive the error message?

  2 have you made any changes to the computer before the show?

  Method 1: Ffollow these steps and check if the problem persists.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if that helps. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

  Method 3: I also suggest you to run a full scan of the system on the computer by using the Microsoft Safety Scanner and check if the computer is infected with the virus. You can download and run the Microsoft Safety Scanner from the following link.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The online scanner will expire after 10 days. The Microsoft scanner running will also run check disk on the computer. This task might cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• When I try to use VAIOcare I get this massage "VAIOshell has stopped working.

  When I try to use VAIOcare I get the following message, "VAIOshell has stopped working. A problem caused the blocking of the program works correctly. "I tried to download it with no luck? Help!

  Hi Frankhile!  Have you tried to re install your VAIO care and updating? Please provide us with the name of your VAIO model so that we can direct you to the support page. Thank you.

• Try using Microsoft Picture It! Publishing in Windows 7. When you try to start a new project or use the Save function under get the message "Windows has stopped working".

  Microsoft Picture It 2001 software installed in Windows 7.  Program will show a project that I recorded in Windows XP that I upgraded to Windows 7, but it wont let me save the project under a different name.  The program does not let me start a blank project.  I get the error message "Picture It! has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "Windows did not close the program and did not warn me of a solution.

  Microsoft Picture IT is not officially compatible with Windows 7. Microsoft's picture IT was abandoned and has been replaced by Windows Live Photo Gallery. You can download Windows Live Photo Gallery for free and install it on Windows 7, but there only basic editing features.

  Windows Live Photo Gallery:
  http://www.windowslive.com/desktop/Photogallery

  Two editors of the most popular free photo with many features are related to the Sub - between the two programs Paint.NET will be easier to use.

  Paint.NET
  http://www.getpaint.NET

  GIMP
  http://www.GIMP.org/downloads

  You can also use the built-in photo editing Paint program. To open Paint, click the Start button, click programs, accessories principally made, and then click Paint.

• How can I get rid of "sos email stopped working on boot up.

  at the start I constantly get a message "sos messaging has stopped working" I don't know what it is or how to get rid of. I have used all available with my advanced system of care.  anti virus cleaner slim smart defrag 2, iorbit malware remover, spy bot search. older files and large complete systems check scans and scans, registry cleaners, I'm out of options and many require assistance

  Hello

  Welcome to the Microsoft Community Forums. We are happy to help you with any problem related to Windows.

  Description of the question, we understand that you wake up message "SOS messaging has stopped working" at startup.

  If you could answer a few questions that would help us resolve this problem:

  1. don't you make changes to the computer before the show?
  2. you use any software related SOS?

  3. you use SOS Online backup software?
   
  This pop up is probably due to left-over something you already had additional files installed on your computer.

  Here are some ways you can follow to resolve the problem:

   
  Method 1:
  Check if the problem persists in safe mode.
  Check out the link:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode
  If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.
  http://support.Microsoft.com/kb/929135
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
  under more information to prepare the computer to start as usual after a repair.
   
  Method 2:
  If you use SOS Online backup software you can try uninstalling and reinstalling it and check if this may help:

  See the link below for the procedure:

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

   

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.
   
   
   
   
   
   
   
   
   

• Unable to use HP support assistant get the hpsf error has stopped working

  Original title: hpsf.exe has stopped working

  When I try to open hp support assistant I get a box that says hpsf has stopped working. says he has encountered a serious problem, click ok to automaticlly app to restart, but it dosent fix the problem

  Hello

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  When you try to open HP support assistant, you get a message that hpsf.exe has stopped working.

   

  This is perhaps due to a problem with the application.

   

  I suggest to reinstall the application and check to see if the problem persists.

   

  Step 1: Uninstall the application

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Install the program

   

  You can install the program on the site:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html?JumpID=ex_r602_go_hpsupportassistant

   

  I suggest you to get more assistance to the HP support forum sites mentioned below:

   

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/HP-support-assistant/TD-p/1301657

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html?JumpID=ex_r602_go_hpsupportassistant

   

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• When you try to view the images get message 'com surrogate has stopped working ".

  Original title: com surrogate has stopped working

  When I try to view my pictures, after a visit some of them, I get an error saying "com surrogate has stopped working". I just bought my phone yesterday and today I tried to show them. I don't have nero or DIVx on my computer. How to solve this problem? I have a windows 7-64 bit

  Hi SualehKH,

  Check out the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-photo-viewer-broken-by-Intel-Corporation/5b762252-56E0-4DD6-8581-83030c4790e3?tab=AllReplies