Get channel numbers

Similar Questions

• The channel numbers and the USB-6259 BNC

  The front panel USB-6259 BNC labels BNC connectors as channels 0-7 and 16-23. Most odd... I have a software written in C++ using NOR-DAQmx that my client will try to use with this unit. When using the channel superior numbers he (not unusually, really) Gets the error-200077 saying that they can only be used in unbalanced mode. But it is not natural for him to use the channel numbers printed on the front of the unit.

  Can someone tell me how the front panel of this device is the channel numbers, you must specify in the code?

  This requires the switch (source of the source/grounded) floating FS/GS that appears under each BNC connector?

  Here's my proposal: differential mode: in the software, channels 0-7 are front channels 0-7. Software 8-15 channels are front 16-23.

  Asymmetric mode: software channels 0-7 are cover 0-7 and 16-23 software channels front 16-23. And 8-15 and 24-31 channels are absent...

  It takes just the opposote of what you have. In differential mode, aix is paired with aix + 8. so, ai31, ai9, AL10, ai11, ai12, ai13, ai14, ai15, ai24, ai25, ai26, 27, ai28, ai29.ai30 and ai8 channels are not available for selection in differential mode. Front panel for ai15-23 labels should be correct and matches what you select in the software.

• How can I get negative numbers on my spreadsheet of numbers to be displayed in red.

  How can I get negative numbers on my spreadsheet of numbers to be displayed in red. The only thing that I can find in the menu turns formatting all the red cell. Not what I want

  Use the conditional formatting.

  Select the range of cells you want to format, and then open cell formatter:

  

  Now click the button of "conditional highlighting:

  

  Now click on the button «Add rule...» » :

  

  Now choose the rule "less to" a value of zero and choose the selection of red text to highlight

• Cannot get correct numbering of pages for sections

  I created an RTF template for a report that is burst by USER name and then on the model, I have the DeptID as the section of the report. When I run the report I get the numbering of the pages by DeptID - so if 1 Department has 2 pages I see page 1 of 2, 2 on 2, then the page numbering starts over for the following service. In fact, I want the report to display a total number of pages for the full report in the header. Any ideas on how I can accomplish this? Thank you!

  Hello

  I just replied to you the up to date with model with fix :)
  It is a way to do it.

  I would like to know how it looks :)

  The model should work the way you want :)

• The AppleScript get cell numbers active

  I want to create a script that checks the active cell or column better / assets to the keyboard layout for the automatic switch from English to Korea and visa versa...

  I can't find it anywhere... where to get the active column? Help, please!

  AppleScript to affect the current selection (if the selection is a single cell, an entire column or some other range) is as follows:

  say application "Numbers".

  say front worksheet active document

  say ( class is worn) fromfirst table whose selection range

  say a selection range

  -do things here, for example:

  -the value of background color "red".

  -value of the first cell value v

  end say

  end say

  end say

  end say

  However, from keyboard, I don't know why you should check the specific range in number.  You may want to watch v (value in, say, the first cell) to check if it is in Korean or in another language?

  SG

• How can I get the numbers to treat my numeric value in text form?

  When using the 'numbers', I want to type in a number and have it show exactly as input, in this case with leading zeros.  How can I get the program to deal with any symbol in the form of text and enter it exactly as I typed?

  Then select all the cells in the Inspector (right bar), click cell (Format-click just above the Inspector, if the cell is not a choice at the top of the Inspector) and change the Format of text data.

  If the Inspector is not visible in the right sidebar, view menu > Inspector > Format.

• How can I get channel z (zero) data encoder with a NEITHER-9411 in scan mode?

  Hello

  I use a cRIO to read a quadrature encoder, and I need z-Canel (zero channel) data using a NOR-9411 in scan mode.

  Chassis: NEITHER cRIO-9074

  Module C-series: 9411

  Encoder: EIB H25 series (model # XH25D-SS-1440-ABZC-28V/V-SM18)

  Now, I installed it using in scan mode and the properties > Configuration parameters of specialty as follows:

  Lifestyle specialty: Quadrature

  Input filter: disabled

  Time base of speed: 4096us

  Index Mode: Disabled

  This replaces Position0 position 1, Velocity0 and Velocity1 module instead of et0, DI1 channels, etc.  It works well to get a reading of the speed, but not the Z.

  I need to know Z as in the rest of my program calculations depend on.  (For this encoder Z is a digital signal that goes low when the encoder reaches 360 °.  It is also a very fast signal.  7200 RPM, it has a width of approximately 3.3us pulse.

  How can I get the data Z in Scan Mode?

  Agile Hello,

  The mode setting of index is the only way to access the Z channel in Scan Mode.  If selected the position will reset when the z channel is detected and the phase of the two other channels corresponds to your selection.

  It seems that you have the real z signal elsewhere in your code.  You may use the position data to generate the Z channel for this purpose?

  Let me know if you have any other questions,

  Sebastian

• How to get page numbers in toc shift to the right

  Hello

  I'm working on a table of contents and try to get the (3, 4, 5, 7) page numbers against the level 1 and level 2] headers to the right. I don't know how to proceed. I would appreciate your help.

  Lee is the screenshot:

  

  Thank you

  You should have a tab between the number of para and text entry, as well as between the text and the page number, but do not display your text symbols (Type > show hidden characters) so I can't see them. Assuming they are there and the two paras TOC use header level 1 and level 2 header by styles (just uncertain of the page, but if I have a para tag names wrong, just replace the good):

  1. Click on the first line of the table of contents.
  2. Type > tabs.
  3. Set a left tab align the left edge of the text entry and a tab right-align by a point of the leader of the page number. (To add: select the type of tab in the tab at the top on the left, then click on above the rule.) You can drag them left/right to move. A selected tab is highlighted in blue or orange, and you can add the point of leading to a selected tab.)
     
  4. With the cursor on the first line, right-click on the name of the style and redefine the style so that the other 1-level headers are updated.
     
  5. On the second line, drag the left triangle below to indent the line (the upper triangle comes along for the ride). Adds a tab on the left for text entry and a right tab by a point behind the leader for the number of page, under step 3 above.
     
  6. Level 3 header and Style to redefine a right click.
     
  7. Fact!
     

  For more information, see create a table of contents in Adobe InDesign and set tabs and indents in Adobe InDesign .

• Get page numbers to properly on distributions of left-right

  I have a document with 5 pages of "forematter": a the title Page, that I have no page number as a section, and then a section 2 section containing the copyright page, dedication page and two-page table of contents, page numbers in Roman numerals.

  Then the meat of the book as a 3rd section, the page numbers in Arabic numerals in standard.

  Here are my pages window:

  

  I need to get somehow '1' to the left page of a spread with '2' and the rest pages reflow accordingly, given that the current Setup gives me the page numbers in the wrong place, as you can see below.

  

  An odd page number must be on the right side of a spread in LTR languages, as is standard. To empty pages, you will need to insert a blank page.

  I do not understand your screenshots, why the margin guide in the spine not showing space for the spinal column and that he should?

• Remove unnecessary characters, space and channel numbers

  Oracle 11.2.0.1

  Windows

  I have data from the table like this:

  David Parker

  Robert Josh

  Hick 1/4

  John ' Fowler

  Bill.Gates

  Herman Patrick «»

  Andrew % Clark

  I want to delete all the numbers, special characters, more than one space between the words and make the correct name.  How can I remove extra characters from string.

  In fact, we get data that has sometimes special characters, including numbers and more spaces in name and it still creates a bad output query.

  Thank you.

  Or...

  SQL > t

  2 ALSO (SELECT "David Parker' DOUBLE str")

  3 UNION ALL

  4. SELECT 'Robert Josh' DOUBLE

  5. ANY TRADE UNION

  6. SELECT ' Hick' 1/4 OF the DOUBLE

  7 UNION ALL

  8. SELECT q ' [John 'Fowler'] ' FROM DUAL

  9 UNION ALL

  10. SELECT 'Bill.Gates' FROM DUAL

  11 UNION ALL

  12. SELECT q'[Herman 'Patrick']' FROM DUAL

  13 UNION ALL

  14 SELECT q'[Andrew % Clark]' FROM DUAL)

  15 SELECT regexp_replace (str, "[^ A-Za-z] + ',' '") final_str

  16 FROM t

  17.

  FINAL_STR

  -----------------------------------------------------------

  David Parker

  Robert Josh

  Hick

  John Fowler

  Bill Gates

  Herman Patrick

  Andrew Clark

  7 selected lines.

  SQL >

• Need to get average numbers > 0

  I need to get the average of the 2 numbers POSITIVE, non-null.
  I still want to keep the NULL value in the column. I want to update the table
  where NVL (temp_s,-1) = 0
  Here's a sample:
  < code >
  create the dummy (MY_ID NUMBER (5.0) of the table)
  C_DATE DATE
  TEMP_S NUMBER (4,0));
  
  Insert into dummy (my_id, c_date, temp_s) values (41, to_date('20130114','YYYYMMDD'), 32);
  Insert into dummy (my_id, c_date, temp_s) values (41, to_date('20130113','YYYYMMDD'), 0);
  Insert into dummy (my_id, c_date, temp_s) values (41, to_date('20130112','YYYYMMDD'), 57);
  Insert into dummy (my_id, c_date, temp_s) values (41, to_date('20130111','YYYYMMDD'), NULL);
  Insert into dummy (my_id, c_date, temp_s) values (56, to_date('20130110','YYYYMMDD'), 59);
  Insert into dummy (my_id, c_date, temp_s) values (56, to_date('20130109','YYYYMMDD'), 0);
  Insert into dummy (my_id, c_date, temp_s) values (56, to_date('20130108','YYYYMMDD'), 51);
  Insert into dummy (my_id, c_date, temp_s) values (56, to_date('20130107','YYYYMMDD'), NULL);
  
  < code >
  I want the output to be:
  < code >
  41 14 JANUARY 13 32
  41 13 January 13 45 < = this update based on the day, before and after.
  41 12 JANUARY 13 57
  41 11 JANUARY 13 NULL
  56 10 JANUARY 13 59
  56 9 January 13 55 < = this update based on the day, before and after.
  56 8 JANUARY 13 51
  56 7 JANUARY 13 NULL
  < code >
  TIA
  Steve42

  Hello

  Here's one way:

  MERGE INTO     dummy     dst
  USING   (
           SELECT  my_id, c_date
           ,         CASE
                       WHEN  temp_s <= 0
                   THEN  CEIL ( ( LAG  (temp_s) OVER ( PARTITION BY  my_id
                                                                ORDER BY       c_date
                                      )
                                + LEAD (temp_s) OVER ( PARTITION BY  my_id
                                                                ORDER BY       c_date
                                      )
                          )
                        / 2
                        )
                    END          AS temp_s
           FROM    dummy
       )          src
  ON     (    dst.my_id     = src.my_id
       AND  dst.c_date     = srC.c_date
       )
  WHEN MATCHED THEN UPDATE
  SET     dst.temp_s     = src.temp_s
  WHERE     dst.tEmp_s     <= 0
  ;
  

  Depending on what my_id role in this problem, and what is unique, you may need to tweak it a bit.

• Channel numbers are not what they should be! CS6

  Hope someone can help me.  On Photoshop CS6 on one of my machines, it is changing the channel # 2 RGB numbers, red #3, green is #4's blue #5.  They should be 1,2,3,4.  Anyone know why this is happening?  This only happens on a copy of Photoshop.  I looked in the prefs and can't find anything that could change that.  Thanks in advance for your help.

  Floyd

  Edit-> keyboard-> channel Legacy shortcuts shortcuts

• regular expression - get the numbers from a string

  Hello world
  
  I'm trying to use regular expressions to get all the numbers in a string. The only problem is that the chain can vary.
  
  For example:
  
  It's my rope 3 and 8 I want 2 get out of those 7 numbers
  Random text 9 with 5 for everyone weekend 8
  
  How can I do?
  
  Thanks in advance :)
  

  Quote:
  Posted by: Scott Stroz
  

  #numbersOny #.

  Who will be only to crush all the numbers in a large number.

  The attached code will return a nice list of numbers.
  Though the numbers may contain commas or decimal points, the code can easily be adjusted

• How to get the numbers to remember a list of answers column on nine or more tables using the same format

  I'm new to numbers but were mainly use it to organize only a simple way to display the cases that arise in a criminal background check. So for a table, I can type driving while license revoked (DWLR) as the load and from there on the charge will fill itself or offer similar responses after typing a single key.  A well appreciated time saver but problems I can sort and summarize the criminal history for 10 people or more at a time and need to do it urgently often.   However when I opened a new table I have to cross and type a new the precise wording of a charge, its disposal (Guilty, voluntary dismissal etc.)  and just know that there is an easy way for the numbers to know in a new table that, if finished it is a list annoyingly long term broken criminal code list and do not have to do that in each new table so that it can take.  I know I'm missing something very basic, but any help would save hours for me and the other poor interns who spend twice as long just to undestand the case and troubleshoot.  Thanks for all the ideas!

  David

  Hi D,

  The AutoComplete feature provides suggestions picked on data entered in the cells above the one you are working in. You can automate the process by preparing a "full menu" table containing ALL the possible inputs for each column in the rows below the header lines.

  

  The checkbox in cell A1 is a switch, is used to insert the word HIDE in the cell that contains the list of AutoComplete terms. Cells in this area are filled with bright red to draw attention to them when indicated.

  A rule to reorganize (shown and applied below) hiding these lines when the box is checked.

  

  Hide the lines does not affect the operation of auto-complete, as shown in the table below:

  

  When the form is competed, action depends on how the result will be recorded and filed.

  If there is no need to edit/modify the file, it can be converted to a PDF using the print dialog. This produces a copy of the displayed part of the document only.

  If the document will require more editing, you can remove the lines containing AutoComplete suggestions. Clear the check box, select all the red lines filled, click the triangle in the row reference tabs and choose Remove.

  Formula in A2 - A10: = IF(A$1,"HIDE","")

  Kind regards

  Barry

• How to get channel Index

  Hello DIAdem users,

  I want to search for a particular string in the name of the channel and once I found this string in a channel'sname so I want to have his index. How can I achieve that?

  Concerning

  Option Explicit
  
  protected groupObj: for each groupObj in data.root.ChannelGroups
  
    protected chObj: for each chObj in groupObj.channels
  
      <>inStr (1, chObj.Name, "ei", vbTextCompare in) then
  
        MsgBox chObj.Name & "" & chObj.ChannelGroup.Properties ("index"). Value & "" & chObj.Properties ("groupindex"). Value
  
      end if
  
    Next
  
  Next
  
  

  To determine the code to read these properties, you can drag and drop it from script properties window.