Get connection SSO modules

Similar Questions

• How to put running or OFF controls the mouse on laptop or how do I get rid of modules and toolbars like conduit, spirit and friend spark Checker?

  Hi, are two quick questions, there any settings of the mouse on laptop computers. I use a mouse usb right now about this because the finger mouse does not work.

  are there ways to activate and deactivate? and how can I get rid of modules and toolbars as auditor of conduit and friend and spark of spirit? any help would be great. Thanks in advance

  Original title: CONTROLS the MOUSE for laptop

  Hello

  Thank you for your question to Microsoft Community.

  Quick questions:

  1. What browser version are you working?
  2. What is the brand and model of the laptop?

  Case 1:

  Mouse, touchpad and keyboard problems can have several causes:

  ·         Cables that are not connected correctly

  ·         Incorrect device settings

  ·         Missing updates

  ·         Corrupt or incompatible drivers

  ·         Hardware problems

  As a first step, you can check the status of the devices by following the steps mentioned below:

  a. click Start, type Device Manager in theStart search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. click Pointing device and check its status.

  Method 1:

  To enable the touchpad try these steps:

  a. click Start and select Control Panel.

  b. Select mouse.

  c. click on Device Settings.

  d. Select the touchpad device.

  e. click on turn on.

  Note: The steps above are generic to any model of laptop. The parameters may vary depending on your model of laptop.

  Method 2:

  If activation touchpad does not help, you can go ahead and uninstall the drivers of the touchpad and re - install the same thing again.

  To uninstall the touchpad drivers,

  a. click Start, type Device Manager in the Start search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. right click on the Touchpad driver and select Uninstall.

  d. restart the computer, if prompted.

  Also I suggest you to consult the following link.

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Case 2:

  Now for the question of the toolbar, if you use these methods follow Internet Explorer:

  Method 1:

  If an unwanted toolbar appears in Internet Explorer, you can turn it off using the Add-ons Manager. Sometimes, however, the problem may be more persistent. If the problem persists, start Internet Explorer in no add-on mode and then use the add-on Manager to disable all add-ons that you have not intentionally installed.

  You can see the following link for more information:

  Manage Add-ons in Internet Explorer

  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons#IE=IE-8

  Method 2:

  Most toolbars can be removed using Add / Remove programs.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  You can also use the specific toolbar removal tool to uninstall or remove the toolbar from the computer.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thanks for posting the result and let us know if you need assistance on Windows.

  We will be happy to help you.

• Connection SSO token problem

  Hi all
  
  CRM OnDemand user authentication type is the user ID and password only.
  
  in CRM OnDemand Web link is configured to send the SSO token at my request. When I click on the web link I get the SSO token in my application.
  But when I send a request to CRM onDemand with SSO token for the user name, I get the response code "200". but in the response headers, I don't get the username.
  
  When I send a request to CRM onDemand with SSO token jSessionId for I get the response code "500", but in the headers sessionid is there.
  
  My Questions,
  
  (1) is it mandatory to set the type of authentication user ID/PWD or Single Sign-On (I use the SSO feature out the SSO feature)
  
  (2) how to get he username, is sent in the headers?
  
  (3) when I try to get JSessionId I get the message error 500, is that my type of authentication is a matter or is it any other step/parameter is missing.
  
  
  Thanks in advance

  Hello

  Here are my entries

  (1) Yes, to my knowledge, the authentication type must be defined as user ID/PWD or Single Sign-On
  (2) the username is available as part of the response
  (3) I think that if you set authentication properly, this can be resolved. Sample code is available under "Training and support"-> Webservices library-> connection management. Use to check if your code is just

  -John CRMIT

• Get 'connection refused' when I open my browser.

  connection refused

  Whe I take IE8, I get 'connection refused', what should I do?

  Hello sitrovan,

  I suggest you try some troubleshooting in this article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer
  This article is also useful to solve many common network problems in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• I can not get connected. I log in ID w/microsoft and takes me to a sales page.

  I signed originally as AuntiM4.  I forgot my password then click on "forgotten password".  Went to the email, obtained the temporary code.  Copied and pasted into the password space and still get "incorrect password".  This is what was sent to me.

  If I sign with my identifier Microsoft I takes me to a page with no. where to go but home sales or support.  I was still not able to connect to this program.

  information from the other thread:

  Title:

  I can not get connected. I log in ID w/microsoft and takes me to a sales page.

  thread Description:

  In addition, my Skype name is passed to AuntiM4 somehow live: rosysdtr so I really don't know what password has been used. There is no change.

  Hello Marilyn,.

  Welcome to the Microsoft community!

  You cannot access the AuntiM4, get the message incorrect password and when you try to connect with Microsoft ID, you are redirected to another page.

  The problem may occur if there is a malicious content or if the hosts file is damaged.

  1. the problem occur only when you access the AuntiM4?

  2 did you do changes on the computer before the show?

  To check if the problem is due to malicious content or corruption of the hosts file, I suggest you follow the mentioned steps:

  Method 1:

  See the site:

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2: Reset the Hosts file

   

  See the site:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

  Method 3: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• I get a message "Module PC Doctor has encountered a problem. If the problem persists, contact Microsoft. »

  I get a message "Module PC Doctor has encountered a problem. If the problem persists, contact Microsoft. »
  I've just updated all the security tools and performance of PCTools and still get the message. The error report ask if I want to send a report and I do often, but I have had no contact from Microsoft.
  I contacted PC Tools, but theyt haven't bee able to solve the problem no more.
  MCS

  original title: error pctdoctor

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/PC-Doctor-module-has-stopped-working-but-not-sure/8cb6be4a-3148-4FF7-a7ef-adf35b653583

  It is in the Vista forum, but the same applies.

  you run analyses:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  a report sent to Microsoft does not require a response, it is used to determine if a fix is needed after numerous reports of errors are sent.

  This is probably due to malware.

  What is the brand and model of the pc, current antivirus, operating system and service pack?

• I can't get connected to Windows Live Messenger.__Everytime I connect happens __Can "Windows Live Messenger has stopped working, a problem caused the program to close down" help please

  I can not get connected to Windows Live Messenger.
  Whenever I connect it comes up "Windows Live Messenger has stopped working, a problem caused the program to close down."
  Can you help me please

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder.

  Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder. When you right click on the connection of customer created, click Properties, it says "connect using the Modem.

  Is it a registry problem or what? How can I fix?

  original title: PPPOE connection problem

  Hello

  1. you connect using a cable or DSL modem?

  2. did you ever get this working before that?

  3. are you connected to a domain?

  4 are you running Vista in a virtual environment?

  You doing appeared in this link to create the PPPOE connection:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-PPPoE-connection-to-the-Internet

  Thank you

• I can not get connected in my original post to Windows Live Hotmail.

  I can not get connected in my original post to hotmail.  I had a virus or someone hacked my account.  Microsoft has tried to help me for 2 days and can not solve my problem.  Is it possible that I can get my Inbox and contacts?

  original title: Correo electronico

  If Microsoft can't help, how the hell someone here would be able to? In all cases,.
  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• Printer not working, get the error 'Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime '.

  I get following errors: Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime Windows 7

  Please stand out as the answer. What is the number and the model of your printer (Lexmark)? You can try to uninstall and reinstall the printer driver.

• The connection failure module 9795 with wsn-3226 with Labview 2012

  Good afternoon

  I have a Crio-9074, with a 9795 module and two modules WSN-3226 and I have updated my Labview to the latest version, version 2012 and me cannot communicate with WSN nodes. The program says that the nodes cannot connect with the gateway. The software I have installed is:

  -Labview 2012

  NOR-Rio 12.0

  NOR-WSN 1.4

  -OR-Real-Time Module 2012

  I checked CRio don't let install WSN host API 1.4.0 because it is not installed in my host. Can someone tell me where I can download it, and if this is the reason why I can't communicate with nodes?

  Thank you for your time

  Hello

  I have

  LaurentV wrote:

  Hello

  Make your cRIO and all modules appear in MAX?

  Could you give more details about the problem, such as a screenshot of instructions on how to reproduce the problem, and you get the error message?

  ---

  Lawrence V.

  Engineering Application OR (France)

  correction of the error, by reinstalling Labview 2012. Thank you very much for your attention.

• Firepower and WINscp - how to get the files module SFR

  Is anyone able to use WINscp to get a file to a module of sourcefire? I think that WinSCP has problems with the admin user do not enter expert mode by default.

  I have a windows environment and can not get the secure copy scp to work of SFR command to a server with port 22 open windows.

  You are right. Sourcefire module/sensor is not as SCP server you cannot use the winSC is there to connect. But it acts as a client PCS, so you can use firesight or any other SCP server and copy the files to the CPS server first and then use winscp to get out.

  For example.

  > expert

  > sudo scp/var/common/leader-to-be-copied [email protected] / * /-IP: / var/tmp

  This will copy the file to the directory/var/tmp in firesight. You can use any other SCP server as well.

  Rate if helps.

  Yogesh

• SQLDev 4.1 ai2 - problem with connection SSO to SQL Server (new)

  I am trying to connect to SQL Server with the new version. I have the jtds 1.3 installed and get the configuration of SQL Server tab, but once more to get the infamous SSO error trying to connect:

  Status: Failure-i/o Error: failure of the SSO: library Native SSPI has not loaded. Check the system java.library.path property.

  
  

  I tried to copy ntlmauth.dll in several places:

  C:\Oracle\sqldeveloper4.1\sqldeveloper\sqldeveloper\bin

  C:\Oracle\sqldeveloper4.1\sqldeveloper\jdk\jre\bin

  C:\Oracle\sqldeveloper4.1\sqldeveloper\jdk\jre\

  C:\Oracle\sqldeveloper4.1\sqldeveloper\jdk\

  Given SQLDev running, but still get the error of SSO.

  Discovered this problem (thanks to Jeff Smith!). I had a 32-bit DLL in the path that are in conflict with the 64 bit one. Once I deleted all of the extra 32-bit versions, the SSO authentication works.

• How to get user SSO in ADF approx. Jdev 11.1.2.3, RedHat 5.8

  Hello:
  
  We use Oracle Access Manager 11.1.1.5 for single sign on against LDAP (Active Directory)
  
  In an ADF application, how do we get the user name of the person who connected to Active Directory?
  
  Thank you very much.

  Hello

  I think that you will have access to the SSO username by calling ADFContext.getCurrent () .getSecurityContext () .getUsername)

  For more information you can access, next to the user name, see http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10686/oracle/adf/share/security/SecurityContext.html

  Frank

• Why do I get "Connection problem" on my laptop, when I try to access my e-mail account Yahoo with the new version of Firefox?

  Since I updated firefox to 29.0.1 on my desktop, I can't access my account at Yahoo.com from my ASUS laptop. "Connection problem" appears when he tries to retrieve new messages. I received mail on the ASUS 12/03/13, but from now on I get this message and no new mail arrives at the ASUS.

  Some problems occurs when your Internet security program was set to trust to the
  a previous version of Firefox, but no longer recognizes your updated as version
  level of confidence. Now how do I solve the problem: to allow Firefox to connect to the Internet
  Once again:

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version)
  • Delete Firefox to list your program of trusted or recognized programs, then add it again. For detailed instructions, see Configure the firewall so that Firefox can access the Internet.