Get Data Excel cells - definition

Similar Questions

• Office toolkit 'excel get data' cannot read anything else of integers?

  I use LabVIEW 2009 and can not get LabVIEW to read non-entiers to a worksheet.  In the attached example, I put a breaktpoint after the new report vi, and and when it hits at this breakpoint I put a number as 1,234 in cell A1, and then continue execution.  But the 'data' outputs always return an integer value.  Even tried to change the format of the output of the data field.  I also tried to replace this with vi (LDM) Excel Get Data in the folder of the Toolbox, but got the same result.

  When I tried the same thing in LabVIEW 8.0 it worked.  No idea what I am doing wrong?  :-)

  Thank you

  -Bill

  Your meter is complete after you have changed the type of indicatpr, then you can get good results.

• How to get data from excel

  Hello world

  How can I get data from excel inside my program? I'm using labview 8.2. I have tried to find the solution for this but seems that the solutions are not suitable. Can someone help me? Thank you.

  Hi jieah,

  Inside of the attachment nijams don't you see this?

  read_excel_values. LLB

• How to get data from an Excel file exist using report generation tools

  I try to use the Excel vi get the data of the report generation tool, but I can't understand how to activate a path can be explored in the right type for the VI.  I tried to use the new Report.vi, but this does not work unless you use a template.  It will not open an existing excel file and make an open report to extract data from.

  Essentially, I have a bunch of excel files that have data in them, and I want a VI allows to analyze the data.  I'm going to pull in all the data directly from the excel file so I don't have to reproscess them all in text so I can use the more standard datasheet live but to convert even the excel file programtically in labview I still need to be able to open the excel file and get the data?

  I found my problem.  It turns out that only not to have had a problem with the tool box new report vi.  I had accidentally wired an input control of path of folder instead of an input control of path of file to it.  Changing the file type took care of her and I was able to access excel files, I tried using the new report VI to extract the file, and Excel Get Data to extract the data.

• Weird behavior of format when writing numbers in Excel cells

  Hi guys,.

  I am trying to wrap my head around a weird problem:

  I write a double 2D table (decimal separator is a comma, so 1/100 is 0.01) in an Excel workbook. I created this 'Test.xlsx' file by hand and not changed anything about the formatting of the cells.

  

  But what I get in Excel is the following:

  

  Why

  1. is the cell A1 different in the formatting of all the other cells (presentation and justification)

  2 the values in other cells bad? There seems to be a problem with the decimal separator.

  Thanks for your comments!

  Zou > I do not, I think it's yet another situation where NEITHER has not thought of countries who do not have the same decimal as in the United States.

  joptimus > the solution is to power through 'Number of fractional string' table with the parameter 'use decimal system' = false and then do go to Excel table easy.

  Then it won't work.

• Apparent problem with OpenG Get Data Name_ogtk.vi

  The data Name_ogtk.vi Get OpenG is a function that takes a data Structure and returns the name of this structure if the Data Structure has a name.

  I use it in my Configure.vi. Configure.VI takes several data structures and saves / loads to an INI file. The name of the section in the INI file is the same as the name of the Data Structure. When loading, Configure.vi takes the name of the data structure to load and locate the Section in the INI file with the same name and then uses the items listed in the INI section to load the Data Structure with the data values.

  In my case, I have 3 sections. Two of the sections, 1 Servo and Servo 2 derive from the same Type definition. I am trying to load 3 of the attached INI file data Structure. The Config.ini in the system file has been generated by the backup function Configure.vi. I'm passing in the routine of the load, 3 Data Structures, each with unique names. I have an explicit call to get the data for Servo 1 Name.vi and 2 Servo. But the probes on the output of the Name.vi of data values get two return to the same 'Servo 1' same string if sensors on the Structure of data entries that clearly indicate them the unique names of the "Servo 1" and "Servo 2" respectively.

  It seems that the 2nd Get data name returns the name of the Data Structure 1 by mistake. If anyone can check this?

  Does anyone know how to fix Get Data Name.vi so that it returns the appropriate data Structure names?

  Thank you.

  I was able to reproduce it and I show here as an oddity to force entry to the variant on the primitive flat string Variant.

  Basically, if you have more than one cluster with content command to match the type and order wired directly to this function, it returns the flattened string which is first to each call.  The wires must be wired without before converting to alternative, if you have points of constraint.

  This only happens if you feed directly the input varying both and get the stress points.  If you are using a variant is not the case.

  I found that this occurs if the cluster is of type defined, and it does not occur for constants.  I didn't try other controls.  I'll be honest, I'm usually used to constrain to the Variant.  I'll be more careful in the future!

  ----

  so convert to first variant will solve your problem.  In addition, if you leave the entry of the section name of the variant config openG write screw unwired, he will take the name as it is the research of the control, you did, so you need not the name of data Get there at all.

  An excerpt from 2009.  as - is equal to true.  The bunches are each a dbl and a bool, but each FP different controls.

  

• Get data from a member of the region partitioned customer

  Hello

  I have a partitioned area, this region is in all 3 members, is it possible to get data from this region but only from 1 member of the customer, if so how?

  What is your definition of the region on the server? The three members have given? You set redundant copies? In addition, if the optimizeForWrite() of the service method returns false, the function will run the smallest number of nodes.

  Follow these steps:

  The redundant copies of the value = 1

  Returns true for optimizeForWrite()

  Make sure that all members contain primary buckets

  Perform function like you do above

  Barry

• How to fix or get data off Mac Pro with display/restart issues

  Hi, my early 2008 Mac Pro running El Capitan suddenly started to show lines all over the screen, then it restarted, displaying an error message and since then he's been stuck in a reboot loop never get past the progress bar and with very distorted display. Two questions:

  (1) any solution to this? It is an old machine, worked great so I would like to continue using it if possible, but do not want to put money in it at this stage.

  (2) what is the best way to get data out of the two internal drives to the machine on my Mac Air? I need to access the files on it, also like his 2 x 1 TB hard drives I will not be able to transfer the data on Air, but you will need to use them as external drives.

  Help appreciated!

  Get a dock like this

  http://www.felinediabetes.com/FDMB/forums/feline-health-the-main-forum.28/

  and take the readers on the Mac Pro and put them in the dock and connect to new mac via USB

  You can also get an enclosure that accept disks 3 1/2 in.

  In addition, you can get a bolt of lightning > FireWire adopter and connect the two Macs via FireWire and start the old mac in target disk mode

  How to use and troubleshoot disk mode target FireWire - Apple Support

  The error message say? Problem could be the graphics card bad or maybe bad memory.

  If you open the side cover are all diagnostic lights on?

• All excel cell number format using "excel cell format.vi set.

  Hi all

  I am writng 12 numbers to Excel cell, but it seems to me that 2.00207E + 11 instead of 200207106040. I use entire excel function cell phone format.vi but it is not useful, because I have no number format...

  Reference in the image file setting a VI.

  Thank you

  Got the answer.

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• get date and time seconds

  I am using get date time in seconds, the function to send the date and time to a sub vi where I can use it to calculate the time difference in timestamps of waveform and the hour when he began to get the time in seconds. So I wanted to know if I pass this value to a sub - vi will be this value constantly updated in the sub - vi or it will remain constant until the sub - vi is finished.

  Yes it will remain constant because the time was read only once, to hand.  Any value is passed to the Subvi remains the same.  If you want once updated, you must put the function get Date/time inside the Subvi.

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• Can all help with VI to get data (HEX) serial number and write in the text file

  Hello I am struggling with this problem for 2 months... They get help from different I thought I solved the problem, but of no use yet I stand on zero

  Problem: I need to get data on USB high speed HEXAGON shaped (coming in hexadecimal and be stored in the text file to the hexadecimal format as each hexadecimal value online different I'll also to attach the file)

  Get us ASCII on series or VISA read but when trying to convert to hex as shown in text file making it slower to deal with code, I know that my VI will have to improve more... I'm waiting for suggestions

  Need urgent help...

  Thanks in advance

  Hi Ali Afzal,.

  I think that the attached example can work for you. If not, then try the solution with sending the data to a parallel running the loop and store it there.

  Mike

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Given an asset Flex, how can I get the Flex related definition?

  I have a trump card of a certain Type of assets Flex flex. How can I get the Flex related definition?

  I'm trying to make a well-founded on the definition of Flex with which it was created. Do you have good suggestions on what steps I can take?

  Hello

  Try something like: -.