Get data from a member of the region partitioned customer

Similar Questions

• Creation of interface that won't use c $ table while getting data from one table to the other.

  Hello

  That was the question asked in an interview.

  Given the scenario has been that I have two servers say s1 and s2, each containing a database with tables source1 and source2 respectively...

  And I have a target table on server 2 with name target 1.

  Cent were as

  1 can data ufetch target1 source1 without creating table C $? If Yes, how can it be achieved.

  2. how temporary will be created all to get ata in source1 and source2 to target1? Explain the same thing?

  Also I would like to know what is the actual use of the c arrays $? Why they are used.

  I would be very grateful for answers.

  Thank you and best regards,

  Mahesh

  Hello

  Look at these links.

  http://odiexperts.com/why-creating-a-separate-schema-for-temporary-tables-in-ODI/

  Also this

  http://odiexperts.com/direct-load-by-interface-with-no-work-tables/

  Concerning

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox

  How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox?

  A sample of XML is like this:

  <>planter

  < Lauvtre >

  < Botanisk_navn > Acer campestre < / Botanisk_navn >

  < Norsk_navn > Naverlonn < / Norsk_navn >

  Gronn < Farge > < / fan >

  H4 < Herdighet > < / Herdighet >

  < Hoyde > 10-15 m < / Hoyde >

  < / Lauvtre >

  I have a combobox where it shows the botanical name and the Norwegian name. But the rest of the info in movieclips seem separate.

  Someone has an idea how to do this? Can I use the trace function maybe? Here is my AS3 code so far:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void

  {

  your. Text = list.selectedItem.data;

  TB. Text = list.selectedItem.label;

  }

  var xml;

  function onLoaded(e:Event):void

  {

  XML = new XML (e.target.data);

  var it: XMLList = xml. Planter.Lauvtre;

  for (var i: uint = 0; i < il.length (); i ++)

  {

  list.addItem ({data: it.}) Farge.Text ([i]) + "\n"+ it.» Herdighet.Text ([i]) + "\n" + it. Hoyde.text ([i]),

  label: it. Botanisk_navn. Text() [i] + "\n"+ it.» Norsk_navn. Text() [i]});

  }

  }

  Loader.Load (new URLRequest ("lauvtre.xml"));

  Thank you!

  Rheus.

  I don't know what you're trying to do.  but, if you want to fill one combobox with the botanical names and when one is chosen, the other use of logins:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void {}

  var selectedObj:Object = a [list.selectedIndex]

  trace (selectedObj ['fan'], selectedObj ['Botanisk'], etc);

  }

  var xml;

  var a: Array = [];

  function onLoaded(e:Event):void {}

  XML = new XML (e.target.data);

  var it: XMLList = xml. Lauvtre;

  for (var i: uint = 0; i

  list.addItem({label:il[i].child('Botanisk_navn').toString()});)

  a [i] = {'Fan': it [i].child('Farge').toString (), 'Herdighet': it [i].child('Herdighet').toString (), "Hoyde": he [i].child('Hoyde').toString (), 'Botanisk':il[i].child('Botanisk_navn').toString(),'Norsk_navn':il[i].child('Norsk_navn').toString()};}

  }

  }

  Loader.Load (new URLRequest ("test.xml"));

• How to get data from excel

  Hello world

  How can I get data from excel inside my program? I'm using labview 8.2. I have tried to find the solution for this but seems that the solutions are not suitable. Can someone help me? Thank you.

  Hi jieah,

  Inside of the attachment nijams don't you see this?

  read_excel_values. LLB

• Collect data from specific frequency of the power spectrum

  Hello

  I want to know how to collect data from specific frequency of power spectrum file. I'm trying to separate data from specific frequency of the original file.

  This will depend on much how your data is stored. You will need a way to read the file in LabVIEW and then a way to identify the data you want. I often record data in a .csv file, then I use "Reading worksheet" to get the data in a table. Then, you can simply use 'Index Array' to get the datapoints you need.

• Get data from a dBASE - .dbf.

  Hello everyone - Hello work Sunday: (.) I need to get data from legacy applications that run the dbase program. You'll need to auto data. If you have an idea, please tell me. Thanks to you, NIC.

  >

  Hello everyone - Hello work Sunday: (.)

  I do not work yet--it's sad that :)

  I need to get the data from the old application
  running the program dbase. You'll need to auto data. If you have an idea, please
  say to me.

  Have a look here http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:711825134415.

  It worked for me, with a bit of difficulty – mainly because of my own stupidity... If you have
  no problem, post back.

  HTH,

  Paul...

  Thanks to you, NIC.

• How to get data from one or several times of perticuler dates

  (1) how can we get data from one or more dates perticuler.
  for example. date of 01/01/2011 and time is 00:00:00 to 23:59:59
  
  and
  
  (2) how can we get data from one or more dates perticuler.
  from date 01/01/2011 to 01/02/2011 date and time e.g. is from 00:00:00 to 23:59:59.
  
  can we?

  Hello

  Use a WHERE clause to include only certain lines.
  For example:

  SELECT     *
  FROM     table_x
  WHERE     dt     BETWEEN TO_DATE ( '01/01/2011 00:00:00'
                      , 'DD/MM/YYYY HH24:MI:SS'
                      )
            AND     TO_DATE ( '01/01/2011 23:59:59'
                      , 'DD/MM/YYYY HH24:MI:SS'
                      )
  ;
  

  In this example, the first date (before the keyword AND) and second (after the keyword AND) lie on the same calendar day. It's just a coincidence, they can be on different dates.
  The first date must not be later than the date of the second; If this is the case, you will get 0 found lines.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• getting data from two servers?

  Experts-
  
  We have two servers for the storage of the tables. 1 history 1. current server Prod
  
  We have same tables in the databases server.
  
  All the info before one month from the date of the day are stored in database tables history server
  and the rest in database tables current prod server.
  
  
  I create reports such as when the user enters a date, OBIEE must check if the date is in a month (30 days) the date today or earlier at 30 days, on this basis, it must get data from historical Server database tables / running production database server.
  
  How can I implement this?
  
  I need to create two clusters of connction (RPD records) and develop the same model twice? (One for the historical paintings and one for prod tables?)
  or can I use the technique of fragmentation? If so, can you give me an idea hwow to implement the Fragmentation of this requirement?
  
  Thank you for your help in advance

  You must use the fragmentation of this requirement. It is not difficult once you understand the basic principle. Nico article read here for details:

  http://gerardnico.com/wiki/dat/OBIEE/fragmentation_content

  The only non-standard bit for you will be to define the criteria of fragmentation on your sources of logical table. This is the part that says BI server to hit source.

  After return here if you get stuck.

  Paul

• Import data from a spreadsheet on the web to the Numbers worksheet

  How can I import data from a spreadsheet on the net in a Numbers spreadsheet, keeping its original format? It is not a problem when you use Microsoft Excel or OpenOffice spreadsheet and had no problem when I was with Appleworks6. When I try in number, however, the data which is along a line on the original worksheet comes to the bottom of the left column, which is completely useless.

  copy the line then pasted in numbers (command C and V command) has always worked well.

  The line of values must be copied from a continuous row of cells.

  If you provide a link to a spreadsheet, I can test it on my machine.

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• the analysis of data from a legacy in the form of bytes bluetooth

  Hi, Iam execution of java for MYGlucoHealth code monitor. I have to catch the bluetooth through my application data and analyze format. (later I store in the SQLite database). But according to the specification of the Protocol had, I do not understand how to read and analyze. I know how to pair the device to my request. But I do not know how to parse the bytes of data according to the Protocol of the device specification.
  
  Can someone tell me how to do this. All done with this kind of coding?
  
  Thnaks in advance,
  
  -Cissokho
  
  Published by: 798686 on November 2, 2010 02:38

  798686 wrote:
  Ok.. Thank you

  Tips for the facilitator: don't double post. I've locked the new thread.
  the analysis of data from a legacy in the form of bytes bluetooth
  Please continue here.

  DB

• APEX can be used to get data from Oracle Applications?

  I would like to develop an application "bolt", which reads the data from our Instance of the Application Oracle R12, creates reports, and then allows users to enter records in an Oracle API to import in the Oracle Applications.
  
  Is this possible? Is this a good idea?
  
  I have not found any thread that deals with this.

  Yes, it can be done. PL see ML Doc 373604.1 (how to integrate Apex with Oracle e-Business Suite and the configuration of authentication)

  HTH
  Srini

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• How config to use the API to get data from Eloqua?

  Hello

  I am coding c# to extract data from Eloqua and works well my trial account.

  When I get another account, it gets an exception with the message "an error occurred during the security check for the message."

  I guess there is something different between the configs of the two accounts, but I don't know which enters into force.

  Any suggestions?

  Best regards

  Biao

  Hi Biao,

  The document (using the Eloqua API - determination of endpoint URL) could be useful. Two customers could be in different data centers, so you'll have a different basis for each URL.

  Now there is an end point which allows to determine the URL for your API calls.  This endpoint is https://login.eloqua.com/id. and the link above describes how to use it.

  Hope this helps and please let us know if you need more information.

  Thank you

  Fred