Get data from performance CPU with PowerCLI

Similar Questions

• How to get data from a URL with as3

  Hello

  I need to get data that is in the view of the source of an external Web page, how it can be done?

  URLLoader allow to get the HTML code as text, then you need extract it.

• How to get data from a URL with as2

  Hello

  I need to get data that is in the view of the source of an external Web page, how it can be done?

  Use loadvars and our method.

• How can I get information from performance on disc with vFoglight 6.5 latency?

  Can someone tell me where I can get info from performance on disc with vFoglight 6.5 latency?

  There are also alarms that deal with the latency of disk. You are looking for a report or dashboard? Check the alarm Viewer and define a filter on the "latency". This will show you all the current latency time, then you can explore the host or logical unit number that is having the problem.

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• Get data from a member of the region partitioned customer

  Hello

  I have a partitioned area, this region is in all 3 members, is it possible to get data from this region but only from 1 member of the customer, if so how?

  What is your definition of the region on the server? The three members have given? You set redundant copies? In addition, if the optimizeForWrite() of the service method returns false, the function will run the smallest number of nodes.

  Follow these steps:

  The redundant copies of the value = 1

  Returns true for optimizeForWrite()

  Make sure that all members contain primary buckets

  Perform function like you do above

  Barry

• Get data from a dBASE - .dbf.

  Hello everyone - Hello work Sunday: (.) I need to get data from legacy applications that run the dbase program. You'll need to auto data. If you have an idea, please tell me. Thanks to you, NIC.

  >

  Hello everyone - Hello work Sunday: (.)

  I do not work yet--it's sad that :)

  I need to get the data from the old application
  running the program dbase. You'll need to auto data. If you have an idea, please
  say to me.

  Have a look here http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:711825134415.

  It worked for me, with a bit of difficulty – mainly because of my own stupidity... If you have
  no problem, post back.

  HTH,

  Paul...

  Thanks to you, NIC.

• How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox

  How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox?

  A sample of XML is like this:

  <>planter

  < Lauvtre >

  < Botanisk_navn > Acer campestre < / Botanisk_navn >

  < Norsk_navn > Naverlonn < / Norsk_navn >

  Gronn < Farge > < / fan >

  H4 < Herdighet > < / Herdighet >

  < Hoyde > 10-15 m < / Hoyde >

  < / Lauvtre >

  I have a combobox where it shows the botanical name and the Norwegian name. But the rest of the info in movieclips seem separate.

  Someone has an idea how to do this? Can I use the trace function maybe? Here is my AS3 code so far:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void

  {

  your. Text = list.selectedItem.data;

  TB. Text = list.selectedItem.label;

  }

  var xml;

  function onLoaded(e:Event):void

  {

  XML = new XML (e.target.data);

  var it: XMLList = xml. Planter.Lauvtre;

  for (var i: uint = 0; i < il.length (); i ++)

  {

  list.addItem ({data: it.}) Farge.Text ([i]) + "\n"+ it.» Herdighet.Text ([i]) + "\n" + it. Hoyde.text ([i]),

  label: it. Botanisk_navn. Text() [i] + "\n"+ it.» Norsk_navn. Text() [i]});

  }

  }

  Loader.Load (new URLRequest ("lauvtre.xml"));

  Thank you!

  Rheus.

  I don't know what you're trying to do.  but, if you want to fill one combobox with the botanical names and when one is chosen, the other use of logins:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void {}

  var selectedObj:Object = a [list.selectedIndex]

  trace (selectedObj ['fan'], selectedObj ['Botanisk'], etc);

  }

  var xml;

  var a: Array = [];

  function onLoaded(e:Event):void {}

  XML = new XML (e.target.data);

  var it: XMLList = xml. Lauvtre;

  for (var i: uint = 0; i

  list.addItem({label:il[i].child('Botanisk_navn').toString()});)

  a [i] = {'Fan': it [i].child('Farge').toString (), 'Herdighet': it [i].child('Herdighet').toString (), "Hoyde": he [i].child('Hoyde').toString (), 'Botanisk':il[i].child('Botanisk_navn').toString(),'Norsk_navn':il[i].child('Norsk_navn').toString()};}

  }

  }

  Loader.Load (new URLRequest ("test.xml"));

• data from 3 tables with later dates

  Hello
  Need help with the PL/SQL code, I need to write a code that will get the data from 3 tables with the most recent date.
  
  For an individual ACT_CODE the output of the SQL query should display the data including the last dates back to 3 tables, if there is no
  Date of the table, it should show the remaining data (think that the left join will do here)
  
  Names of tables:
  Institution_UPDT aiu
  AC ASQ_CONTACT
  GR_AUTHORIZE gr
  
  All 3 tables have ACT_Code in common
  
  Column names
  
  INSTITUTION_UPDT IAU - IAU. ACT_CODE, AIU.project_id as proj, IAU. UPDT_TYPE_ID, IAU. User_id, IAU. UPDT_DATE
  
  ASQ_CONTACT ac - ac. ACT_CODE as contact_code, ac.project_id, ac.first_name, ac.middle_initial, ac.last_
  Name, AC.title, AC. Status, AC.status_date
  
  GR_AUTHORIZE gr - GR ACT_CODE as grad_code, gr.name, gr.title AS grad_title, gr.submit_date
  
  
  Are the names of the columns date
  AC.status_date,
  IAU. UPDT_DATE and
  Gr.submit_date
  
  Thanks to you all
  appreciate your help
  
  Jesh

  Hi, Ngoumba,

  If a given ACT_Code couldn't miss from any of the tables, then you will use better full outer joins, not a join left outer.

  Perhaps it would be more effective to make a UNION of the three tables, then rotate the results in three datecolumns.

  You can use the GROUP BY aggregation to get the last date for each ACT_Code in each table.
  If you need other columns in the row which is the last date, you can use the ROW_NUMBER analytic function, like this:

  SELECT  ACT_Code
  ,     updt_date
  ,     ROW_NUMBER () OVER ( PARTITION BY  ACT_Code
                            ORDER BY          updt_date     DESC
                    ) AS r_num
  FROM    institution_updt
  

  The lines with r_num = 1 are the most recent

  This is a technique of ot the UNION-PIVOT example:

  WITH     union_data     AS
  (
       SELECT    ACT_Code
       ,       MAX (updt_date)     AS last_date
       ,       1                  AS table_id
       FROM       institution_updt
       GROUP BY  ACT_Code
  UNION ALL
       SELECT    ACT_Code
       ,       MAX (status_date)     AS last_date
       ,       2                  AS table_id
       FROM       ASQ_Contact
       GROUP BY  ACT_Code
  UNION ALL
       SELECT    ACT_Code
       ,       MAX (submit_date)     AS last_date
       ,       3                  AS table_id
       FROM       GR_Authorize
       GROUP BY  ACT_Code
  )
  SELECT       ACT_Code
  ,       MAX (CASE WHEN table_id = 1 THEN last_date END)     AS aiu_updt_date
  ,       MAX (CASE WHEN table_id = 2 THEN last_date END)     AS ac_status_date
  ,       MAX (CASE WHEN table_id = 3 THEN last_date END)     AS gr_submit_date
  FROM       union_data
  GROUP BY  ACT_Code
  ORDER BY  ACT_Code
  ;
  

  Published by: Frank Kulash, on September 16, 2009 15:02
  Added UNION-pivot example

• Aggregation of data from multiple sources with BSE

  Hello
  
  I want to aggregate data from multiple data sources with a BSE service and after this call a bpel with a process of construction of these data.
  1 read data from the data source (dbadapter-select-call)
  2. read data from the data source B (dbadapter-select-call)
  3 assemble the data in xsl-equiped
  4. call bpel
  
  Is this possible? How can I get data from the first call and the second call to conversion data? If I receive data from the second call, the first call data seem to be lost.
  
  Any ideas?
  Gregor

  Gregor,

  It seems that this aggregation of data is not possible in the BSE. This can be done in BPEL too using only assigned but not using transformations. I tried to use transformations by giving the third argument to the function ora: processXSLT. But couldnot get the desired result.

  For more information on the passage of a second variable (of another schema) as a parameter to xslt pls refer to the post office

  http://blogs.Oracle.com/rammenon/2007/05/

  and the bug fix 'passage BPEL Variable content in XSLT as parameters'.

  Hope this helps you.

  Thank you, Vincent.

• How to get data from excel

  Hello world

  How can I get data from excel inside my program? I'm using labview 8.2. I have tried to find the solution for this but seems that the solutions are not suitable. Can someone help me? Thank you.

  Hi jieah,

  Inside of the attachment nijams don't you see this?

  read_excel_values. LLB

• How to export data from the table with the colouring of cells according to value.

  Hi all

  I use jdeveloper 11.1.1.6

  I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?

  You can find us apache POI-http://poi.apache.org/

  See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

• How to get data from one or several times of perticuler dates

  (1) how can we get data from one or more dates perticuler.
  for example. date of 01/01/2011 and time is 00:00:00 to 23:59:59
  
  and
  
  (2) how can we get data from one or more dates perticuler.
  from date 01/01/2011 to 01/02/2011 date and time e.g. is from 00:00:00 to 23:59:59.
  
  can we?

  Hello

  Use a WHERE clause to include only certain lines.
  For example:

  SELECT     *
  FROM     table_x
  WHERE     dt     BETWEEN TO_DATE ( '01/01/2011 00:00:00'
                      , 'DD/MM/YYYY HH24:MI:SS'
                      )
            AND     TO_DATE ( '01/01/2011 23:59:59'
                      , 'DD/MM/YYYY HH24:MI:SS'
                      )
  ;
  

  In this example, the first date (before the keyword AND) and second (after the keyword AND) lie on the same calendar day. It's just a coincidence, they can be on different dates.
  The first date must not be later than the date of the second; If this is the case, you will get 0 found lines.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• getting data from two servers?

  Experts-
  
  We have two servers for the storage of the tables. 1 history 1. current server Prod
  
  We have same tables in the databases server.
  
  All the info before one month from the date of the day are stored in database tables history server
  and the rest in database tables current prod server.
  
  
  I create reports such as when the user enters a date, OBIEE must check if the date is in a month (30 days) the date today or earlier at 30 days, on this basis, it must get data from historical Server database tables / running production database server.
  
  How can I implement this?
  
  I need to create two clusters of connction (RPD records) and develop the same model twice? (One for the historical paintings and one for prod tables?)
  or can I use the technique of fragmentation? If so, can you give me an idea hwow to implement the Fragmentation of this requirement?
  
  Thank you for your help in advance

  You must use the fragmentation of this requirement. It is not difficult once you understand the basic principle. Nico article read here for details:

  http://gerardnico.com/wiki/dat/OBIEE/fragmentation_content

  The only non-standard bit for you will be to define the criteria of fragmentation on your sources of logical table. This is the part that says BI server to hit source.

  After return here if you get stuck.

  Paul

• Get data from an Essbase Cube with Jean BAPTISTE

  Hello

  I'm new on the subject of japi essbase and I need help.

  I try to get some data from an essbase cube. In Excel, I used the essbase add with the function 'esscell() '.

  Is there a way to do the same thing with the japi essbase?

  If you just want to export data to a text file, then it will be probably easier to look at the following options

  DATAEXPORT - DATAEXPORT

  Script report - report writer commands

  MDX - MDX

  See you soon

  John