get error for an inputText below
Hello
JDEV 12.1.3.0
I get the error on the label of SHV inputtext below.
Houston-29000: Unexpected caught exception: java.lang.NumberFormatException, msg = for the input string: "NaN".
It was with CORS; Policy = "deleted page"
Tags: Java
Similar Questions
-
Get errors for the user input data filter no KB 911895 HID
OT: iI have windows xp S/P 3 installed also apple i pad I get errors for the user input data filter no KB 911895 HID
What should I do to get rid of this popup that wizzard windows keeps giving me?Hi Graybeard,
What is the exact error message you get?
HID Non-User Input data filter is an optional update. I suggest you try the steps from the following link:
The screen saver does not start after the installation of a wireless pointing device
http://support.Microsoft.com/kb/913405What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-runningTroubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339 -
Why do I get errors for CS 5.5
So I try to load CS 5.5 after the failure of my HARD drive. Some of the programs loading (Audition, Photoshop, still and Flash) However, the two I really need to Prime Minister and After Effects, as well as Illustrator don't be loading not for nothing. I'm on a Windows 7 computer and get the following:
Exit code: 7
-------------------------------------- Summary --------------------------------------
-fatal error 1, 15 error (s), 1 WARNING (s)
WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} has been updated and has been selected for repair. The {42774483-D33C-46F7-8B20-FD0B1A3DAC25} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now.
ERROR: DW020: found payload conflicts and mistakes:
ERROR: DW020:-Adobe Photoshop CS5.1 Core depends on AdobeColorCommonSetCMYK to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core depends on AdobeColorEU CS5.5 to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core depends on AdobeColorJA CS5.5 to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core depends on AdobeColorNA CS5.5 to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core depends on AdobeColorPhotoshop CS5.5 to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core_x64 depends on the AdobeColorCommonSetCMYK must be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core_x64 depends on AdobeColorEU CS5.5 to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core_x64 depends on AdobeColorJA CS5.5 to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core_x64 depends on AdobeColorNA CS5.5 to be installed.
ERROR: DW020:-Adobe Photoshop CS5.1 Core_x64 depends on AdobeColorPhotoshop CS5.5 to be installed.
ERROR: DW020:-Adobe Flash CS5.5 depends on AdobeColorCommonSetCMYK to be installed.
ERROR: DW020:-Adobe Flash CS5.5 depends on AdobeColorEU CS5.5 to be installed.
ERROR: DW020:-Adobe Flash CS5.5 depends on AdobeColorJA CS5.5 to be installed.
ERROR: DW020:-Adobe Flash CS5.5 depends on AdobeColorNA CS5.5 to be installed.
FATAL: DW020: conflicts were found in the selected payloads. Stop the installation.
------------------------------------------------------------------------------------- !
And Yes, I did a lot of things suggested here nothing is.
Help, please
Jason
I could repeat something that you summarize as "and Yes, I did many things suggested here nothing is.", but it is unclear that you tried this assertion...
Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs
-
* Original title: update Windows 7
My displayed errors:
- > Sign up for the Service is missing or damaged
- Updated Windows error 0 x 080080005
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
-
key to active but MAC always get error
My customer has purchased 10 licenses of Adobe Web Premium CS5. So far, we just used and 6 of 10 licenses (turn on the Windows computer) successfully activated. They tried to key active but MAC always get error like the image below: deleted by the moderator >
Please help me solve this problem.
Thank you very much.
Hello
Please do not post images with serial numbers since it is an open forum.
Reference: error: "serial number is not valid for this product". Adobe Creative Suite
Kind regards
Sheena
-
Undeclared identifier error for some methods of "PDFEdit_Layer".
Hello
I get errors for some methods of the PDFEdit_Layer,
1 code-> PDEText pdeText = PDETextCreate();
3 error C2065: 'PDETextCreateSELPROTO': undeclared identifier
2. code-> sysFont = PDFindSysFont (& pdeFontAttrs,sizeof(PDEFontAttrs), 0);
5 error C2065: 'PDFindSysFontSELPROTO': undeclared identifier
3. code-> pdeFont = PDEFontCreateFromSysFont (sysFont, kPDEFontDoNotEmbed);
9 error C2065: 'PDEFontCreateFromSysFontSELPROTO': undeclared identifier
4. code-> pdeColorSpace = PDEColorSpaceCreateFromName (ASAtomFromString ("DeviceGray"));
Error 11 error C2065: 'PDEColorSpaceCreateFromNameSELPROTO': undeclared identifier
5. code-> PDETextAdd (pdeText, kPDETextRun, 0,(ASUns8 *) title, strlen (Title), pdeFont and gState,sizeof(gState), NULL, 0, & textMatrix, NULL);
15 error C2065: 'PDETextAddSELPROTO': undeclared identifier
Whatever such as header files, I'm the above errors.
#include "CoreExpT.h".
#include "PDSExpT.h".
#include "PEExpT.h".
#include "PERProcs.h".
#include "CorCalls.h".
#include "PDCalls.h".
#include "PERCalls.h".
#include "PEWCalls.h".
#include "PDSExpT.h".
#include "PSFCalls.h".
#include "PDSysFontExpT.h".
I've tried, including the headers above, then also I get errors as described above. Please let me know why - what is going on, I missed something?
Please someone help me, thanks in advance.
Kind regards
Chetan.
You have defined player settings? There that sets
tell the SDK can only use methods for drive - remove these!
-
Am increasing the drive C for XP VM, get error while doing below it please help me.
Am increasing the drive C for XP VM, get error while doing below it please help me.
In this case, the reason is the virtual IDE drive. Increasing the disks IDE is not possible the vSphere client.
Take a look at KB VMware: conversion of a virtual IDE disk to a virtual SCSI disk to see if this is an option for you.
André
-
Hello
I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.
"You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"
Please help me with that and I don't want to give permission to admin for all users group...
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
I get the message 0x8007043C error code when I try to get updates for windows xp.
I get an error message when I try to get updates for Windows XP 0x8007043c. For windows installer pop shows I'll click on it and then I got error handler and also I'm being arrested when I am trying to download things directly, it's a virus than other od are picking up my security programs, is there something I can do? Any help would be appreciated.
The options provided below may help you solve the problem.
I quote Maurice N ~ MVP - a regular contributor here:
This give a try.
Start button > select RUN > type of services. MSC
The following services are required by the Windows Update process.
In the services (services.msc) management console may NOT be * Disabled * in the startup type.
They show a manual or automatic startup type.
Here are services and their startup types:
Background Intelligent Transfer Service (BITS) manual
Automatic encryption services
Remote Procedure Call (RPC) automatic
Restoration of the automatic system of Service
Another suggestion: browser in Internet Explorer > main menu Tools/Options Internet > Security tab / click the Green Trusted Sites icon / click Sites.
Click 'require a server secure (https :) for all sites in this zone' to * clear * the selection.
In the ' add this Web site to the zone: "field, add these entries to the list of"Trusted Sites"- type
http://download.windowsupdate.com (click to add)
http://windowsupdate.Microsoft.com
Click OK. Apply the changes.
Also, make sure that you are connected with administrator rights when you access Windows Update.
UTC/GMT is 09:00 on Tuesday, June 12, 2012
-
I can't send emails or Photos. I'm getting error 4202 for Hotmail and error OX800CCCOE for Live Mail and photo gallery
Hello Natou41,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
I get error Code 8007371 B. I tried several times to install and it still fails? What can I do to have it installed.
Hi CSAMaximus,
(1) how long have you been faced with this problem?
(2) what is the complete error message you receive?
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Download and install the tool of the system was last updated
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821
Method 3: the clean boot computer and then try to install the updates.Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Harder and harder to get the machine going. Below error messages.
My computer was becoming progressively more difficult and harder to go there every day. When I get an error code is as below. I do not always get one. Most of the time it will allow me to make the sign of the screen. However, after that it will freeze or restart at random times during the boot process. I was at a forum to find viruses, spyware or adaware and all unpleasant things. My machine was clean. So I guess I have another question. So, I'm here to ask for help with this error message. Thanks for your help to solve this problem.
C:\Windows\Minidump\Mini101310-03.dmpC:\Users\Rick\AppData\Local\Temp\WER-63726-0.SysData.XMLC:\Users\Rick\AppData\Local\Temp\WER2EEC.tmp.version.txtPAGE_FAULT_IN_NONPAGED_AREA (50) - invalid system memory was referenced.
http://msdn.Microsoft.com/en-us/library/ff559023 (vs.85) .aspx
Probably caused by: hardware
FAILURE_BUCKET_ID: IP_MISALIGNED_ataport. SYS
BUCKET_ID: IP_MISALIGNED _ataport. SYS
So, it seems that your RAM is damaged. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.
Also update the driver of the MACHINE:
Image path: \SystemRoot\system32\DRIVERS\GEARAspiWDM.sys
Image name: GEARAspiWDM.sys
Timestamp: Mon May 18 14:16:53 2009http://www.GearSoftware.com/support/drivers.php
André
[1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
[2] http://www.imgburn.com/index.php?act=download"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I search for updates and tell me that two important updates are available for my system but when I try to install I get error code 800b0100
http://support.Microsoft.com/kb/956702
Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.
If the above does not resolve the problem:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.
I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program." This happens when attempts to cut-copy-paste------delete files (including the specific details listed below). I searched on the Microsoft Support site to find answers to solve the problem, including the thread:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321
In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action. Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.
I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:
I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:
I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message
"You must be authorized to perform this action."
You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.
After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.
Then I tried to delete a file in a different location on the external hard drive and the message
"You need give permission to delete this folder.
When I clicked on continue what he deleted
I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:
"You need permission to delete this folder.
When I clicked on continue he grew up:
", You need permission to perform this action."
You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.
When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?
After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:
"Cannot perform this action because the folder or the file is open in another program
Close the folder or file, and then try again.
When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.
Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321
(same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?
I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)
I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:
"You need give the administrator permission to move this folder.
When I clicked on continue as he moved the folder
Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:
"You need give the administrator permission to move this folder.
By clicking on continue he grew up
"You must be authorized to perform this action."
By clicking on try again, just to repeat the error message and could not undo the move
I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:
"You must be authorized to perform this action."
When I clicked on continue he grew up
"You must be authorized to perform this action."
You need permission from the administrator of the computer to make changes to this file.
When I clicked on Try Again, he said.
"Cannot find this article.
It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.
When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.
The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?
When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.
I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message
"Cannot perform this action because the folder or the file is open in another program
Close the folder or file, and then try again.
He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.
After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.
I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc. I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
"Gpedit.msc is not available in Windows 7 Home premium. Discussion here:http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs
He then mentioned
"If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".
with no information on how actually access HKEY_CURRENT_USER
I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache
but there is no entry "DisableThumbnailCache.
I researched and found that you can add it in
http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html
I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
and yet, there was no entry on DisableThumbnailCache
The second method mentioned in
http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html
has been to access via the Group Policy Editor
I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries
A folder titled "for Windows 7 Group Policy Editor.
a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".
Setup.exe
The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it
So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.
I went back on the WindowsSeven Forum and found advice in the thread
http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html
Title: how to open the local Group Policy Editor in Windows 7
The tips were:
To search for a group policy or the registry key, value, etc., see:
The link above leads to:
"The GPS is going to move to a new end area January!
http://gpsearch.azurewebsites.NET
You will be redirected in 15 seconds! »I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:
GetCategoryDependencies() - 500ServerError
This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.
At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?
Sense my frustration? If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?
It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify
As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation
And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.
And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate
-
I get error 2378 could not access VBScript Runtime for custom action, when I try to install the software and uninstalling some software.
I tried several online for regsvr32 vbscript.dll fixes and nothing has helped.
I tried to remove the keys from HKCU\Software\Wow6432Node and it is said that they do not exist.
I have registered the VBScript engine in the folder it is installed, said successful but still does not work.
I tried with run as administrator of the command-line also.
It is a Dell laptop with Windows 7 Home Premium 64 - bit.
Any suggestion would be appreciated.
Thank you
Oldestman
Hello
What operating system is installed on your computer?
Method 1: This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation. I suggest to try the steps below and check if the problem is resolved. If you have already tried these steps then we do know.
Delete the registry following key then save the VBScript code and check if that helps:
Step 1: If you have a 64-bit operating system, you must follow these steps:
a. Click Start and type cmd in the box start the search.
b. right click on cmd in the list programs, and then click Run as administrator.
c. at the command prompt, type the following command and press ENTER:
reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}" / f
If you have a 32-bit operating system, you must follow these steps:
a. Click Start and type cmd in the box start the search.
b. right click on cmd in the list programs, and then click Run as administrator.
c. at the command prompt, type the following command and press ENTER:
Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}
Step 2: Register VBScript by following the steps below:
a. Click Start and type cmd in the box start the search.
b. right click on cmd in the list programs, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
c. at the command prompt, type the following command and press ENTER:
If you are using32 bit version of Windows, and then run the following command:
regsvr32 vbscript.dll
If you are using64 bit version of Windows, and then run the following commands:
%windir%\syswow64 CD
regsvr32 vbscript.dll
d. after the command is executed successfully, try to install
Method 2: Diagnose and correct program installation and uninstallation of the problems automatically
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Maybe you are looking for
-
I wonder what this icon of padlock icon envelope for my gmail account solitary, in the list of e-mail under the heading accounts get Mail. None of my other icons in the list of mail to account email doesn't have that. Can you help me?
-
I ran test material on my macbook pro (late 2012) three times. for the first time test reported with error fan like this "4M0T/4 / 40000002:left sid - 5134 ' but no more errors in the next race. Although the test has not reported any problem two term
-
Cannot adjust the brightness in point 8.1 of Windows for G510
-
I'm glad my MN-700 and will not change if don't have to. I recently changed my modem (Motorola SB6120) with DOCSIS 3.0 technology (Comcast). When go directly from modem to pc = 35 Mbps download speed when the download speed of the modem to MN-700 ele
-
How can I get photos from my windowslive to craigslist account?
When I go to put a photograph on craigsist my Gallery of photos will not be displayed for me to choose?