Get ID identification android from a device

Similar Questions

• I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  Hello

  Follow these steps to clear your locked watch and re-pair it with your iPhone:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.
  • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• I get a msg saying windows media player cannot delete a file from the device. What should I do?

  I put an album on my sansa fuse. The synchronization process has not finished now correctly the album does not work on my mp3 player. I tried to remove it so that I can re sync and im getting this msg saying "windows media player cannot delete a file from the device." I also tried to delete the album directly from the mp3 player and it does not always remove. What should I do?

  Hi danat4489,

  You can follow the steps described in the article below and then check if it makes a difference

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• iTunes invalid response from the device

  Thus, since updating my iPhone 6 to IOS10, I have been unable to sync with my mac. When I plug my phone I get the message of athis on my mac...

  iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  I click OK

  I look at my phone it asks if I want to trust this computer. I click Yes. Nothing.

  So I wait. Nothing. I disconnect and try again. Same thing. I tried all the USB ports on my mac. Same thing.

  Search the forums here, looks like a common phenomenon when connecting to a PC, but not a mac.

  Connection to a Mac Pro Tower

  10.7.5

  iPhone 6

  Devices running iOS 10 require the latest version of iTunes, which requires OS X 10.9.5 or more. It's time to upgrade.

• is itunes error message cannot connect to my iphone because of an invalid response was received from the device

  get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device

  Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Cannot connect iPhone 7 more to iTunes because an invalid response from the device

  I tried to sync my phone to iTunes and I get an error message stating "invalid response from the device. I tried to remove the password, and it still doesn't work. I also tried using a new USB cord. I'm doing something wrong? I can't sync my music or ringtones. Will there be an update to iOS 10 soon to solve this problem? I am extremely disappointed that I can not connect my new phone!

  You use iTunes version 12.5?

  Get the latest version of iTunes - Apple Support

• Invalid response was received from the device

  Now that I've updated my iOS 10 6plus my phone will not connect to my macbook pro. I get an error message stated "iTunes only could not connect to iPhone because an invalid response was received from the device. I removed the password and fingerprints, phone rebooted, macbook restarted and still does not.

  Hi kcampagna8,

  Thank you for using communities Support from Apple. We are sorry you are experiencing this problem with your iPhone. If you get an error with "an invalid response" message when you try to connect to iTunes, you can find the troubleshooting steps in the following article useful:
  
  

  Check your USB connections

  If you see the error 4005, 4013, 4014, learn what to door. If you see one of the errors below, you might have a USB connection problem:

  • 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650
  • 2000, 2001, 2002, 2005, 2006, 2009
  • An error message that includes, "an invalid response.

  Follow these steps to see if the problem is with your USB cable, a USB port or computer. Try again after each step:

  1. Use the USB cable supplied with your device. If you do not, try a different cable USB Apple.
  2. Switch to a different USB port on your computer. Do not connect on your keyboard.
  3. Plug it into another computer.
  4. If you still see the error, you can check for any other problem USB, with the third-party security softwareand the problems with hardware.

  If the problem persists, contact The Apple support.

  Get help with iOS update or restore errors - Apple Support

  Concerning

• 2 iphones record calls made from a device

  My Iphone and my wife, calls in absence or from a device. How to fix this?

  It is because you share an Apple ID, which they are not designed for. Get an Apple ID separated to http://appleid.apple.com.

• How to stop receiving messages from text from other devices

  How to stop receiving messages from text from other devices?

  Can you give us some more information please? Are you getting these texts in all of your devices, or family members?

  If you are getting the texts family members and share one Apple ID, that's why.

• Bluetooth disappears from the Device Manager

  Hello I have a HP Envy 13 - x 2 j002dx and I'm having bluetooth associated with is questions is frustrating given the bluetooth keyboard. Every day my bluetooth driver disappears from the Device Manager and the bluetooth settings option does not appear again. I need to reinstall the Intel bluetooth driver (sp68385) every day and even if I can't find the device manager driver he said whenever the driver is already on my computer. Please help I love the computer, but I'm ready to get rid of it because of this problem. I don't have to reinstall a driver every two days or so to use my keyboard.

  Another thing to try... restoration/uninstall both drivers WiFi and bluetooth. Especially if you have just updated their. At some point, I updated the driver wifi intel on my asus laptop and the missing of Bluetooth. Took me several hours of research and to play with the drivers to understand a wifi update some how stuck on the bluetooth hardware.

• NO SOUND FROM AUDIO DEVICE

  NO SOUND FROM AUDIO DEVICE. I have Logitec PID:A836 Audio Device with no sound. It worked very well in the past. I tried to update the drivers, but the computer says that there are no drivers for the device? When I check my control panel under sounds and devices, he says I have no Audio device. Said material that I have no control of the media device. I have no CD or sound card. What can I do to get this resolved?

  Hi SteveRoop,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. when he says that there are no drivers for the device?

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2

  If the previous step fails then you will have to manually, download and install the latest drivers for the sound card on the computer by visiting the manufacturer of the computer or the website of the manufacturer of the sound card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Insuffecient privileges to install the drivers from the Device Manager.

  Windows XP Pro SP3

  "You don't have sufficient privileges to security to unistall devices or to change device properties or device drivers. Please contact your site administrator, or logout and log in again as an administrator and try again. "
  

  This message appears for me when I try to install a driver Ethernet from the Device Manager, even if I am connected from the only available on my user accounts Admin!
  

  I tried re-formatting of windows, but does not choose the CD drive niether shows the start menu when I start the machine.

  any suggestions please?
  

  or any other required information?

  Thank you very much.

  It's part of the problem that I do not in the BIOS, I know that many make the CD/DVD of my first startup. I just can't make the first boot from it! What about the second problem which I can't make changes in Device Manager.

  Thanks for your reply.

  Using a portable OEM version or office? They have total control over your system? You can only use it for the calculation of daily life.

  If you can not enter the BIOS so no way to change the boot device priority.

  Better, you contact the OEM.

  How are therefore continue on you can't get into the BIOS? Have you tried several times by pressing "Del" or the "F2" key during startup (when the first time OEM or any screen logo into your monitor after restart or reboot)?

  S.Chatterjee

• X200T not boot from any device after updating the Bios v3.00

  Hello

  I recently updated my bios to the latest version, the v3.00 X200T and now it does not start from any device - everything I get a blank screen after the initial bios starts upward.

  The bios seems functional and it recognizes all the devices I attached, as well as the internal hard drive. However no matter how to start the machine it does not start. I tried to set the boot order in the bios, using F12, F11 for recovery, remove the internal HARD disk, used all the USB ports, etc... -all I get is a blank screen after the initial splash screen.

  No beeps to indicate any problems, and I tried to reset the default settings of the bios, remove battery & power - all to nothing does not.

  Any ideas?

  I updated the bios of many laptops and desktop computers in the past, but this is a new one on me...

  I hope someone can help.

  Darren

  It seems that it also happens to X 200 owners who upgrade to version 3.01 of the Bios.

  mc2sgp has posted a response in this forum that worked for me:

  "I have the same problem and found the way to a temporary solution."  Go into the BIOS (you should always be able to press F1 to go into the BIOS) and go to Config-> CPU Intel VT - d characteristic of-> and disable it.  You should now be able to start normally in your operating system. "

  At least, I can now start my camera.

  Hope this helps others.

  Darren

  ADMIN edit: tagging this post as the solution to guide others to the bypass.  Lenovo will remove the BIOS on the web and replace it with an updated version that resolves these symptoms as quickly as possible.

• Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

  I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

  At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
  I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
  , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
  (a # 169 instead of a # 192)
  In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
  'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
  Results: connection Test
  Test details:

  I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

  X "Ping 0.0.0.0 Gateway: failure.
  !  "No DNS server is available for this connection.
  ! "No WINS server is available for this computer.
  X "Ping 0.0.0.0 network: failure.
  ------------------- -------------------------------------------------------------------------------------------------------------
  In this same window of diagnostics under the "LinksTab".
  Link current test status: (what is determine the current connection speed of the adapter and link partner)
  Results:
  ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

  The best link options-results of the speed test:
  ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
  (Note that these link tests are online and I can't online)

  Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
  Depending on the tab is the Hardware tab
  Hardware diagnostics check for I/O conflicts...
  Results: all the tests:
  EEPROM test
  FIFO test
  Test register
  Interruption of the tests
  Loopback test

  I also went in the prompt type in IPCONFIG... c which shows:
  Ethernet connection to the Local network card:
  ConnectionSpecific DNS suffix: (it's completely empty here)
  Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
  Autoconfiguration IPv4 address: 169.254.160.220
  Subnet mask: 255.255.0.0
  Default Gateway: 0.0.0.0

  I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

  I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

  I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
  Thank you!

  Hello
   
  We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.
  
  Open the destination folder where the files are extracted and run the Setup file to complete the installation.
   
  To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
   
  For more information on downloading and installing the drivers, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  I hope this helps.
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• DVD drive icon has disappeared from the Device Manager and my computer

  DVD drive icon disappeared from the Device Manager and my computer. I m using window 7. How can I get it back.

  Ashwani Hello,

  Thanks for posting on Microsoft Community.

  There are various reasons why a CD or DVD drive may not be detected. I would like to ask all of the steps in the Microsoft Article describes a troubleshooting and check if they help to resolve the issue.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Note:

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy. For more information about backing up the registry, please see the link below.

  How to back up and restore the registry in Windows

  Hope that advice is useful. Let us know the State of the question, so that we can guide you further.