Get Miracast working on an Inspiron 11 3137

Similar Questions

• Dell Inspiron 11 3137 - DW1704 Wi - Fi + driver BT = BCM43142 Windows 7

  Dell Inspiron 11 3137 - DW1704 Wi - Fi + driver BT = BCM43142 Windows 7 drivers required

  Does anyone have access to the correct drivers that works on Windows 7 (32-bit)?

  This laptop only came with Windows 8.

  All of the similar Dell products that have DW1704 wireless card not containing or have an incompatible version of the combo without wireless/Bluetooth driver set.

  Network (wireless) - controller Dell 1704 Combo Bluetooth 4.0 802.11b/g/n Wireless
  PCI\VEN_168C & DEV_0036 & SUBSYS_020C1028 & REV_01
  Proceed to Windows 8.1 is not an option at the moment.

  Hmm I had a similar problem, but my Dell 3137 seemed to have a Dell 1705 Wireless-N card. Windows 7 recognized the BT 'half' of the card, but I was myself to find the drivers for the WiFi of the half of the map.

  You have a 1704, yet it seems that our hardware PCI ID are the same.

  I got my WiFi 1705 driver from here. Credit to this Web site. You can find the page your ID of PCI hw if you're still looking.

• Why speakers do not work on Dell Inspiron 15R

  Why speakers do not work on Dell Inspiron 15R

  Try:

  -Come on in Panel of-> Sound-> reading tab and make sure that your reading
  device (speakers) is defined as the default value;
  -Run the sound troubleshooter in Panel->-> hardware & audio troubleshooting.

  If this does not work, then download and install the latest audio drivers. You can find them in your PC manufacturer's Web site, in the first case, or, failing that, the manufacturer of the sound card / device *.

  * If your audio device is built into your motherboard, go to the website of the manufacturer of the motherboard to get.

• Reference Dell touchpad doesn't scroll in Windows 10 - Inspiron 11 3137

  Updated my Inspiron 11 3137 to 10 Windows by doing a clean install.  I installed all the drivers from the Dell Support site for Windows 10 x 64, including the v19.0.15.2 Dell Touchpad Driver (A00) listed. I configured the touchpad settings as I had them in the previous OS - with 2 fingers of active scroll. It worked fine, but now has problems to win 10.

  Win 10, scrolling works fine in Google Chrome and Nitro pdf reader only (I've tested, at least). In Internet Explorer, and all of the 'modern' aka 'Metro' apps, scrolling does not work. When I scroll gesture, a small roll of type icon appears but nothing happens (see attached photo).  I tried to reset the touchpad settings and I tried to uninstall / reinstall the driver, without success.

  Suggestions?

  Thank you!

  

  In case anyone else has this problem, I solved it by installing the driver for the Touchpad of Dell for Windows 8.1. Now, all scrolls, including Windows 10 apps and Internet Explorer.

  The version that works is v17.0.9.23 (A03) and is listed under 8.1 WIndows drivers.

• NB100: How can I get ACPI working under XP

  Hello world

  I wonder how I can get ACPI working under XP.
  When I enable it in the BIOS, Windows will not start... Should I load the drivers during the installation of Windows XP? That would lead me to my next problem, because the command line switch - one for the extraction of the driver does not work... Does not extract the files either.

  Or y at - there a way to add ACPI to my XP install is already running (the BIOS ACPI option is currently set to "compatibility"?

  Thanks in advance!

  As far as I know before enabling ACPI in the BIOS, you must remove the standard PC driver in Device Manager and install the ACPI driver.
  Then go into the BIOS, turn it on and should start Windows.

  In the Microsoft Knowledge Base, I found an article on the ACPI Compatibility:
  http://support.Microsoft.com/kb/314088

• 9.3 IOS on iPhone 4s: phone will not feed after upgrade. What can I do to get it working again?

  My iPhone 4s will fuel not after the iOS put 9.3 to level. What can I do to get it working again?

  Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by resetting, but it can erase some problems after installing new software or applications.

  If this does not work, try to connect in recovery mode, explains in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

  If it is not the case, the problem could be related to material and the phone must be verified by Apple or an Apple authorized service provider.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Apple iPhone - contact Support - support

• my dvd player reads all movies what do I do to get it working.

  my dvd player reads all movies what do I do to get it working.

  I had this happen to my DVD player recently.  The problem was that the disc I was trying to see it used a copy protection system is not yet implemented by my DVD player.  Normally, I don't have the DVD player connected to the network, so he had not received the updates of the firmware since I bought the player.  After that I connected it, you download an update of the firmware and I could see the movie.

  My recommendation to you is to see if the manufacturer of the DVD drive has an update of the firmware of your player on the website of the company and, if so, has it, then test again.

• Could not get computer working properly due to malware. Went to safe mode and cannot fix. Can we please hep

  Annot get computer works correct due to malware. Went to safe mode and cannot fix. Can we please hep

  Hello

  1. what exactly is the problem?
  2. Why do you think malware are causing this problem?
  3. What have you tried in safe mode?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• Laptop stops playing the video in facebook and have to restart to get it working again?

  Laptop stops playing the video in facebook and have to restart to get it working again?

  Hello

  Try a new installation of the plugin flash/ActiveX as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  After this has completed, restart the laptop.

  When windows has reloaded, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.

  When the installation is complete, restart the laptop.

  ***************************************************************************

  If the above is not correct the problem, try the following.

  First of all, download and run the uninstall program of Shockwave on the link below.

  http://fpdownload.Macromedia.com/Get/Shockwave/Uninstall/Win/sw_uninstaller.exe

  After this has completed, restart the laptop.

  When windows has completely recharged, download and install the latest version of Shockwave on the following link.

  http://get.Adobe.com/Shockwave/

  Once again, after the installation, restart the laptop.

  Kind regards

  DP - K

• When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

  When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

  I just downloaded and installed IT - no problem.

  Make sure that the firewall is not trying to block it.

• Can any1 help me get the bluetooth on an inspiron 1525 running

  Any1 can help me get the bluetooth on an inspiron 1525 race I think Norman 2 uninstall the driver and reinstal, but I do not know how to run vista 32 thank you

  Hello

  ________________________________________________

  read these tutorials on how to set up bluetooth:

  How to set up a Bluetooth connection

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  __________________________________________________________________

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  _____________________________________________________________________

  If the above does not correct it contact the manufacturer of the hardware/device

  __________________________________________________________________

  Here are the drivers for it

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=INS_PNT_PM_1525&OS=WLH&OSL=en&CATID=&impid=

  and a link to a manul cat it

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

• I hawe eloquence pc Acer Aspire 5820TG 2 days my webcam no longer works on my Skype account and I can not find hao get it working again, I eawen hawe deleted the account and tried to reinstall

  Hello.

  I hawe eloquence pc Acer Aspire 5820TG 2 days my webcam no longer works on my Skype account and I can not find hao get it working again, I hawe eawen deleted the account and I tried to reinstall Skype, but still the webcam does not work, any hao suguestions to recower my webcam on my pc?
  Mr.Kare Krogstad.

  Check the Device Manager.  Click Start and right-click computer.  -> Device Manager, click Properties.  Look under imaging devices.  Right-click the entry for your webcam and click on properties.  If it is disabled, you can activate it if there is no lack of material.  Also check to see if there is one? or! by the entrance.  If so, you need to download a new copy of the driver and reinstall.

  Good luck.

• How can I get Jabber works on iPad without CUCM?

  Nice day

  Question: How can I get Jabber works on iPad with TMS and VCS instead of CUCM?

  Material: TMS 14.5 with VCSC/VCSE X8.2.1 and TMSPE 1.0

  Rarely Jabber is used on an iPad here for the last time we tested, it was probably more than a year and it worked great. I have a new request if and when you go to the store I notice the previous product working is no longer available and has changed for Cisco Jabber 11.0.3. I feel that this only works with CUCM.

  Can someone tell me if it is possible to get this new application running without CUCM and rather through VCS /TMS? I tested a variety of attempts to connect to the new application and they are all lead to not being able to find a server. Cisco documentation is a bit complicated on this issue so I'm hoping someone here might have some experience with this.

  Any help is greatly appreciated.

  Thank you
  Mike

  The customer you are looking for is 'Cisco Jabber Video for iPad', which is what Jamie refers in its response.

  However, the Jabber video for iPad is therefore more available for download, as it's end-of-sale (eos-eol-notice-c51-732786), this is because Apple requires that all their applications must be 64-bit, and it was not possible to update Jabber video application as 32-bit based.  In addition, in the case where you have the video Jabber for telepresence (Movi) customer is also EOS (eos-eol-notice-c51-732787).

  Replacement for both video Jabber clients products are Cisco Jabber client (that you mention at the end of your message) with CUCM only, as call manager is management that moves to Cisco for call control.

• Webcam does not work in my Inspiron N4010

  The integrated webcam does not work in my Inspiron N4010. In Device Manager it does not - there is no category for imaging devices. The central webcam and Skype (that I uninstalled and reinstalled) indicate no webcam and request that one be plugged. Please notify.

  If you are good with a screwdriver you can probably fix it really fast. First turn off the laptop, then remove the Panel before (trim sreen) to expose the webcam and unplug carefully, not to break the wiring of the plug. Finally, turn the computer on the bezel even reverse, but expect that the computer fully boots up... now plug it back (with the computer), now to see if your webcam is now detected and installed as a "Device-Image" in Device Manager. If so, you good to go!

• I use the free trial version. I try to print an Applitrack online application. He said that I should print preview it.  It does not work.  How can I get it works. Help.  I'm afraid that my request will be not visible to employers.

  I use the free trial version. I try to print an Applitrack online application. He said that I should print preview it.  It does not work.  How can I get it works. Help.  I'm afraid that my request will be not visible to employers.

  If it is an Acrobat, who never had a print preview, because the PDF screen is an overview of what the prints.