Get read and write access to the info.plist file

Similar Questions

• Old iOS that app is improved with a new generation of Air is not verified by the Apple Store because of the limitations of UIRequiredDeviceCapabilities in the info.plist file

  We ordered to upgrade an old iOS/Android app.

  We have developed the new app with Flash Professional CC (Build 15.0.1.179) + Adobe Air (19.0.0.190) for the two operating systems. No problem on Android. Apart from a bit of work by removing the prefix app id air.

  Also construction parts new and several dimmer on iOS was perfectly conducted.

  The issue raised during the passage of the generation of production to the audit. The error returned is

  The APP's info.plist can contain the value of the UIRequiredDeviceCapabilities key that would prevent this app to open on any iOS device.

  After a lot of searching on Google without solutions, we realized that the problem is that the old version of the app has no restrictions of use, while the new! In fact AIR compiler automatically inserts this pair of values in the info.plist file

  
  

  < key > UIRequiredDeviceCapabilities < / key >

  < table >

  < string > armv7 < / string >

  < string > opengles-2 < / string >

  < / array >

  which means the new app cares something and will not let the devices to run itself!

  This two capabilities of our reviews are almost useless as soon as iOS version 7 + (according to the guidelines of our generation) does not require the

  < key > MinimumOSVersion < / key >

  < string > 7.0 < / string >

  in any case it is

  How to remove this key in the info.plist file?

  It is our opinion that Adobe needs to find a solution in the compilation process, because if these required features are mandatory, it is virtually impossible to migrate from almost any old application to the air framework, which seems nonsense.

  Hope someone can help us.

  Thank you

  Luigi

  I finally found a solution for this problem and want to share it here to help all developers have the same problem.

  I have downloaded an application for Mac, called AirSign (https://www.airsignapp.com/), which allows to edit and re-sign .ipa assuming you have good certificates and provisioning profile.

  By using this application, I have delete the unwanted required functions (opengles-2 and armv7) then export to Xcode Archive.

  Then I opened archive with XCode and packed the new .ipa from there.

  Finally, I downloaded the App loaderipa.

  Note that AirSign can repack the ipa, but for some reason, I don't know it is not accepted when downloading with the Application Loader.

  I really hope this can help, and I'm guessing why Adobe is not interested in this problem.

  Ciao

  Luigi

• How to read and write attributes using the API?

  I'm trying attributes of access (read and write) of the following:

  SequenceFile

  Sequence

  The sequence steps

  When you look at the documentation of the API, TestStand, the following functions are available:

  PropertyObject

  Properties

  Attributes (read-only)

  HasAttributes (read-only)

  Methods

  DisplayAttributesDialog

  I tried to use the SetValString and GetValString commands using the reference of the attributes, but it does not seem that the data is stored in the file.

  I can't find the following information in the TestStand API:

  1. Where the attributes are stored in a property object?
  
  
  2. How can we access through the API?

  No advice and no information is appreciated!

  You must increment the number of changes to the file after that editing the sequence editor (or UI) won't refresh or mark the file, as amended. Use sequenceFile.AsPropertyObjectFile (). IncChangeCount().

  SequenceFile attributes are stored in the SequenceFile.Data, not the object of SequenceFile object. You can change them in the Advanced tab of the properties of the file sequence dialog box.

  Hope this helps,

  -Doug

• Read and write data to the content repository.

  Hi all
  We use the content repository to store a document and images on the web server in the Center.
  So we have created/setup a repository of content on the web center.
  Please proivde me some might document page to get an idea of how I can read and write the date
  content repository.
  You are most welocme to provide some idea /suggestion.
  Thank you
  Arun.

  You are using webcenter spaces or you create a custom application webcenter?

  When you create a custom application webcenter, you can make use of the workflow Documents. Jdeveloper resources catalog, you will find a few flows of Documents job that will allow you to add some components to manage documents in a folder structure.
  You must first create a connection to your content from your application server. This can be done in the Application resources, right-click on the connection and in the context menu, select "content repository". Them you must filll in connection to your content server details. Make sure you have selected "Set as primary connection for document service" because otherwise the document taskflows you deposit on your page will not find a connection.

  Once you have added the connection, you will also find a datacontrol to the content repository. In this way, you can use the datacontrol place the taskflow and you can create several custom tables.
  I'm not sure but I think the datacontrol also include surgery to create the document but I'm not sure...

  And if not enough, you can always do use the webservices provided by content server. In Jdeveloper you can easily create a datacontrol from Web services by providing the wsdl file. UCM provides for services so that you can import the wsdl into your application and you can easily create your own forms checkin, tables...

  Here is some information on how to integrate services document:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_doc_lib.htm

  and here are some others:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_content.htm#BABCCFJH
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10149/documents.htm#WCSUG2635
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e12405/wcadm_documents.htm#WCADM205

  Published by: Yannick Ongena on Oct 8, 2010 08:23

• Read and write in a PARAM. CMI file?

  Hello

  I have a problem with the reading and writing of a PARAM. CMI file. If I remove the "Section" block at the top and move the first element to the top, I can read very well but I can't get past the sections.

  Section ex: "[Core]" if I delete that and everything move upwards no problemo. Any help would be appreciated.

  Yes. Oops. It was the air code. You would use URLLoader and URLRequest instead of FileStream and file. My bad. For example, if you have done the URLRequest thing and got your file in a first function URLLoader I gave you become:

  private void loadCMIFile(evt:Event):void {}

  var cmiLoader:URLLoader = evt.currentTarget as URLLoader;

  try {}

  parseCMI (cmiLoader.data);

  } catch (err: error) {}

  trace (err.name, "\rUnable to parse the selected file." + err.message);

  }

  var lessonStatus:String = "Lesson_Status."

  trace (CMI [lessonStatus]);

  }

  Just parsing the text, we can make an object or an XML in flash that contains the data in a readable way, but if you want to rebuild the IJC to Flash file so you will need to know what these headers. I mean if there is no information and they are not text, you will need to know the number of bytes that they are and then put aside in a ByteArray so that you can transfer them on your later output file. Or you need to find the specifications of file for them - they could be full of location bytes or ID tags or who knows.

  Assuming that we have to fear is the analysis, I would like to make a suggestion. Maybe you want your data to a XML in Flash:

  private var cmiXML:XML =

  ...

  ...

  To save time to look for keywords, you can configure a set of vectors that contain

  private const cmiCore:Vector. = new ["Student_ID', 'Student_Name',"Output_File"... etc.];

  private const cmiCoreVendor:Vector. = new ["CoursePath"];

  private const cmiEvaluation:Vector. = new ["Course_ID', 'Comments_File', 'Objectives_Status_File'];

  etc...

  Then you can read like this:

  private void parseCMI(string:String):void {}

  analyze the main

  for (var i: int = 0; i< cmicore.length;="" i++="">

  var regExp:RegExp = new RegExp (cmiCore [i] + "=");

  If (regExp.test (string) {}

  cmiXML.core.child (cmiCore [i]) = extract (string, regExp);

  }

  ]

  }

  private void extract(str:String,_re:RegExp):String {}

  var value: String = str.substr (str.search (re));                    makes a string that starts after the "equal" sign

  value = value.substring(0,value.search(/[\r\n]/);           cut the string at the first jump of line or return transport

  Returns the value;

  }

• DAQmx Synchonrized read and write operations on the same device

  Hello

  I use a PCIe-6535 to test a chip that we made in our research group. In order to quickly analyze the data, I have to be able to synchronize the reading and writing. We have an inspired interface to (toggle pin A, axis of the B scale, read C axis, toggle pin...).

  We have figured out how to create a reading task and a writing task, but we have no idea of how to make the two simultaneously in order to implement this interface.

  Have spent a few hours searching online, I have not found any that makes a lot of sense. It seems it should be really simple and common to...

  Does anyone have an example or a tutorial that they can point us?

  Thank you
  Dave

  I spoke to an engineer of applications very nice who told me this, which is exactly what I need:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6200

  There's even an example for my card

  Thank you

• Problem with the Info.plist file in application Loader

  Hello. I have a problem with the download process. When I choose the zip file I downloaded from the generator of Viewer in the application loader and I try to send it, the program tells me this: "Unable to process validation Info.plist demand at this time a general error. What can I do?

  Thank you

  I have been told by some people who have faced this problem it has been resolved. Can you please try again and check if the application download successfully?

• "ITMS-9000 ERROR:"Invalid Bundle. " The viewer.app bundle does not support the minimum what OS Version specified in the Info.plist file

  Hello

  We read all the discussions around the error that appeared a few weeks ago.

  Just rebuilt our app with DPS 3.2.1 and Application Loader 3.0 and having the same problem.

  What should we do? Thanks for the help,

  Kind regards

  John S.

  Wait a day or two, and then try again. There seems to be an intermittent error with the application loader.

  Neil

• "Invalid Bundle." "... viewer.app does not support the minimum OS version specified in the Info.plist file"

  I tried to re-construction of the app and it's not helping. The plist has the minimum OS listed as 6.0. I could go and try to change it manually, but then the signature will be invalid. Correct this ASAP.

  We believe that this issue is resolved. Please let me know if you continue to see the problem.

  Neil

• GPIB read and write commands of Agilent 54642 oscilloscope

  Dear friends,

  I would like to acquire a waveform of Agilent 54642 ocsilloscope in the LabView 7.1 via GPIB program. Can anyone mention the GPIB read and write commands for the oscilloscope even?

  Furthermore, on the subject of the LabView program, is it fair to place blocks to write two GPIB followed by a single GPIB read block (everything series), as well as an indicator, in order to check the waveform in LabView?

  Kindly help me with your answers...

  Look forward to y...

  Thank you very much in advance...

  Marion

  Download the 7.0 driver that Albert gave the link to, make sure that you have installed NI-VISA and run the getting started sample which is part of the pilot. If it does not, please elaborate on the error codes that are reported.

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• Help blackBerry Smartphones... 8530... language... Here you are... Add... Read and write Chinese English to the Japan

  Helooo I want download link and... A solution language how to add input more...

  Read and write in Chinese English language at the Japan in my blackberry curve 8530... OS 5.0.0. Bundle... 1675...

  Thank  You......................................

  Hello and welcome to the community!

  Please start by these KBs:

  • KB05305 Location of support for BlackBerry smartphones
  • KB17208 How to install and configure the language pack of East Asia on a BlackBerry smartphone

  If you get stuck somewhere, please be very explicit (the exact KB, the exact step, etc.) when you come back to ask for more.

  Good luck!

• Get write access to the VI API to allow stopping a server ESXi via Toolkit VI

  Shutdown, APC by 3i

  Referring to the above link and more precisely the following statement ' VMware ESXi 3.5u4 has just been launched and the internal API seems to have been fixed and exposed VI API will have only read-only access when you use the version of ESXi license.

  I did some playing with 3.5u4 ESXi and use the VI Toolkit to connect to the host of 3i. I have been unable to stop the ESXi host as it gives me the error "fault. RestrictedVersion.summary ".

  I understand the question (see this link fault. RestrictedVersion.summary).

  My question is how can I pay for that to work (which agents do I need to buy).

  In my scenario (small client under 15 users), I have a server terminal server in physics and I want to implement SBS on a box of 3i. I want to be able to issue a stop command to the area of 3i of the terminal server using the VI toolkit.

  So I'm able to buy an agent / license to allow write access to the API?

  My first thoughts were:

  • I need to purchase a license to host VirtualCenter for this box of 3i.

  • Then, he would be more free and I was able to 'write' API?

  • I guess on the SBS box, I wouldn't need to install virtual center, just the license service so I got somewhere to point the box of 3i in a location of license

  • VirtualCenter can be provided as a serial number or the host license?

  Any ideas or suggestions?

  I like the VI Toolkit to be able to issue the shutdown command, in turn will stop the VM guest for me.

  At least you need the Foundation license which includes vCenter. Which will give you full access r/w to the VI API, this limited restriction applies only to the free version of ESXi, you are aware of.

  This KB provides details on the type of license required for full access in RCLI: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006543

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• Impossible to find the field read and write VI in labview 2009

  where is the field point to read and write VI in labview 2009

  According to the version of LV, BT pallets can be sensitive to the context. Try to create a project and add a fieldpoint target to the project.  Right-click on the target of FP in your project and select new > vi.  Now FP functions should appear