Get several indicators image... help!

Similar Questions

• Photoshop CS6 (vs 13.0.1) severely pixelated images

  I have an iMac, running OS X Yosemite 10.0.1.   Almost everytime I open all the files (RAW or Jpeg) I get severely pixelated images. I'm the Bridge ACR to Photoshop or Photoshop browser. It is intermittent. But very often.  I can close the file and open it and sometimes it's just perfectly fine and sometimes it happens again.  Any advice would be great.  I keep all my images on an external hard drive.  I have 8 GB of RAM. All programs uptp date.

  -trevee.

  

  Or, more likely, it's just the known bugs of video driver in MacOS 10.10.

  Apple is aware of the video driver bugs and work on a solution.

  Until Apple can release a solution, you can disable the GPU of drawing in Photoshop preferences and restart the application.

  If you really need the GPU features in Photoshop, you can consider downgrading to a more stable version of MacOS.

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• With the help of several mouseover images distributed on a BG image

  Here's the concept: at the recent show of my group, I got a picture of the scene.  I use this image as a background image for the site. When someone visits the Web site, when the mouse pointer hovers over a tool, image mouseover intervenes and surrounds the instrument with a white outline.

  I do this by creating images flown over; the mouseoff image is exactly the same as the part of the background image is above.  The mouseon image is surrounded by a white outline instrument (for the attention of viewers and let them know that it is a clickable object).   The positioning is difficult, but I managed to get the first image in place.  You can see the results http://www.solarisrpg.com/files/akistos/tbb/index.html.

  However, the problem arises when I insert a second image mouseover.  When the image first appears in Dreamweaver CS5, it sits in the lower left corner of the image of BG.  When displayed in a browser, the image appears to the right of the image of BG, hovering over the fill background color. (screenshot below)

  

  When I insert position data in the attributes of the image for the image of mousover (floating bass), it drops below the image of BG completely. (screenshot below)

  

  As you can see, all the other attributes of the picture are working very well.  Passage of the mouse, it displays the appropriate image.  When I click on it, the link appears where and how it is supposed to.

  I've tried using < div > tags to each image mouseover on a separate layer.  That has not worked; behaviors have remained the same.

  Help, please!

  does not have a closing DIV tag.

  Try to add all your pages below your Photoshop slices, instead of between the two DIV, them. You may also comment on each one if it makes them easier to find in mode code. As follows:

• Quick way to get several images out of my project

  Hey,.

  I need several still images (pref saved in jpg or png) exported out of my project and I was wondering if there is a quick way to do it?

  I know I can save 1 at a time other than project but I need an image for every second of the video of 20 minutes and don't really want to do that 1 200 times.

  Is there a way to batch export?

  Thank you

  (Running Final Cut Pro X on a 13 "Macbook Pro)

  https://fcpxfree.com/collections/utilities-and-apps/products/fcpximageexporter

  Set markers at locations, run the application.

  Need to export a lot of pictures of your editing but don't want to sit there do it manually?

  Well drop markers in your fcpx timeline, export a file fcpxml and fcpxImageExporter will do the rest!

• I use Windows 7 and I am not able to print several different images on a single page.

  When I try to print photos from the 'My pictures' library, I use the following steps:

  1. turn the photo highlight

  2. click on 'print '.

  3. in the window that says: "How do you want to print your photos? I choose the number of photos I want per page, for example 3 x 5.

  4. when I try to add a picture DIFFERENT from my library so that I can print several different photos on this page of photos of 3 x 5, it simply replaces the previous photo. How can I get there?

  Thank you.

  Original title: I use Windows 7 and I am not able to print several different images on a single page. The answer posted here from 8/11 includes a link that does not work.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  What program you want to use?

  We will try to print in a different way and check.
   
  Open Paint and then do a collage of different photos then save it then open it in their program and print.
   

  To print the image in Microsoft Paint, steps to follow:

  a. Click Start, in the search box, type in the paint.

  b. open the document you want to print.

  c. select print and check.

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

   
  Hope this information helps. Please reply back with the

• Why several ghostly images when I play the video in the timeline?

  I'm new to Speedgrade and I understand how it is powerful - but I think it's completely intuitive compared to After Effects or first or even PhotoShop.

  I loaded a test clip (30 p ProRes) and when I try and play and watch on the configuration of the monitor I get four ghostly images of the shooting.

  I'm not using an external monitor as I am shaken upward in a hotel room working on a MacBook Pro.

  In order to speed (ironic, huh) I'll probably make the colors work in After Effects, but if someone can point me in the right direction I would appreciate it.

  Forgive me if this info is already posted on the forum - I tried search but he came up to the top with a white and a large number of tutorials.

  Don't not seen this... but it would be good to get a few things to help you. SpeedGrade is a program unique, but it's actually quite simple to use once you begin to understand the controls and what they do, which is often a little different from what is a noob expected... as when I started with him, I have found certainly!

  First of all, it is more demanding of hardware damage even... If the Sg doesn't like your platform, it will simply go crazy doing nothing. He won't give you small problems like stammering, he'll do great things that obviously does not work. So... that's just MbPro got for the video/graphics card? And how much RAM? Computers that use the graphical features embedded very rarely work well with SpeedGrade. Under 8GB RAM... don't even think on this subject. You MIGHT be able to live with 6 GB of RAM, as some people have claimed that they did... but this isn't a nice job... slowing.

  Following... is this a project of SpeedGrade 'native mode', where you open SpeedGrade and a new project, and then make a timeline it in SpeedGrade, or a draft Premiere Pro sent to Sg by using the command "live from SpeedGrade?

  Initially, I found Sg so impossible, that I used Ae a little myself. Now... I was not to AE for a long time, except to say fight against noise or create a sequence of reading can do a LUT of her.

  First step to a colorist or the marshalling of the app is neutralize your videos... Making it NOT enough. It's a different passage home and down the road. In this step, I don't even look at the picture very much... I'll have the RGB Parade, Luma and YUV Vectorscope 'up' signal and watch, particularly the parade & wave. I select the slider controls (in color wheels) and unlock all the controls I use (the small icons of lock). I'll adjust individual controls in color on the section Offset (left set of sliders) to match the bottom of their footsteps a little over 2 or more, I will look to see if it's ok or should it perhaps a little lighter with this image. The switch for the Gain sliders (right) and set them to basically same heights for the scope of the parade, with their vivid the two lower at 100 and research appropriate for the image. It is sometimes as low as in the 1960s, sometimes as high as 99.

  Next is to use the Gamma sliders (in the middle) to correspond mainly to the parade & - waveform traces... all easily identifiable 'forms' in the mid tones I will align with each other.

  The foregoing leads me what... 20 seconds? May 30 at the most.

  Then I switch back to the color wheels and compare the images with my eyeballs and the vectorscope... How is the saturation and... How is the balance of color/tint and the proportions compared to what I'm used to seeing on the field and the monitor? At this point, I'll do a bit of tweaking of the Gamma & Gain color wheels and luminance sliders, perhaps use contrast, temperature, magenta or rotate the cursors in the cursor above group wheels. This neutralizes things pretty well.

  Can do... Nice... or better. JUST looking at a picture's contrast, luma (lamps or dark) or chroma (color)... where's the good contrast, where... not very good? You can have too little contrast color (saturation) in the midrange, but perhaps too in the brights... or your shadows can all tend to block upward around 5-20, when you need to go up a little higher. This is where the tabs above the wheels of color shine... This example:

  

  The tab made highlights chosen... No, you have still three wheels, each with (vertical slider) luma and chroma controls (wheel)? They overlap, and in order to play a bit with a ramp is great. A "ramp" is a tonal graphic staircase from black to gray in several stages, make an and import... then play around with the settings and see what effect each has... where on the ramp.

  Here, on the tab highlights... the rightmost is very bright pixels in the clip, with overlaps down the scale a little. Controlling the environment moves mainly on the third median of this, the upper third of the image around... with some effect in the poorest and brightest pixels in this part of the scale. The right control is the bottom of the upper third... usually used to help blend in the midrange. Also... See the control 'grayed out '? Set that say gray color and pixels that you change will be in color, the rest of the shaded image. You can see directly what you change.

  So... as you have three basic commands, Offset, Gain and Gamma, and three controls each for shadows, average and clear tones, you have a LOT of very refined tweaking you can do. Also... Note the vertical slider to the left Luma control for the facts tab highlights? In text turned on its side, it says mph... who is the pivot of control that defines WHERE on the scale of the end of the midrange and treble begins... you can move upwards or downwards. Among the witnesses of midtones, you have sliders on both sides, one for the breakpoint of shadows/Mids, one for the breakpoint Mids/facts highlights. Shadows tab has a pivot for the shadows/shades breakpoint.

  It affects all the cool things you can do with the secondary and masks and other... but it's long enough for now!

  Neil

• Try to get an install Image, but she says that my product key is not valid

  Hi all!

  Recently I just tried to install Windows on a Mac and when I try to get an install Image it says: "invalid product key".

  I do not understand why this happens upwards I'm getting the key to product directly out of the back of a laptop computer, the only problem is that I don't know what OS it is.

  Any help on this is appreciated!

  Also, I am turning the question on my Mac is because the laptop does not work, I have another that I could try to use!

  Thank you!

  ~ indy

  You can't use a mac on windows key and you cannot use a key off a lapot broken to activate windows on a mac.  You need a valid windows key for your operating system.  What OS are you trying to install?  How are you trying to install?

• Whenever I have to connect on facebook, I get several schannel error messages 36874 and schannel 36888

  Whenever I login to facebook, I get several error messages for schannel 36874 and schannel 36888 in schannel 36888 sequence shows 40 mortals, then 107.le how block or stop this?

  Hi Stephane_patrick,

  Thank you for writing to Microsoft Communities.

  According to the description of the problem, it seems that you are unable to access\open the Internet Face book site.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. other sites work well?

  2. have there been recent changes to the computer before the show?

  3. what web browser do you use?

  Please go ahead and try to optimize Internet explorer by following the steps mentioned in this link.

  How to optimize Internet Explorer: http://support.microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  Please follow these recommended steps and post if you still experience the problem.

• I would get a single image appears 4 times on a pice of paper to print? How could I go about this?

  I would get a single image appears 4 times on a pice of paper to print? How could I go about this?

  Hi raymondp,

  You can duplicate the layer several times (right/control click on the layer and choose Duplicate Layer) and then move the layers around using move tool you want to that they will organize.

  Kind regards

  Claes

• When I print from Lightroom 5 I get a mirror image, what settings should I change?

  Hello I have a printer Epson SC-P600. When I print pictures from the 5 Lightroom print module, I get a mirror image of the printer. When I print from iPhoto, the direction is correct. Am I missing a setting somewhere in the print module in Lightroom I must uncheck or check?

  Hey Joe,

  When I chose the layout of the full dialogue you had was posted. Reverse has been verified, so I disabled it.

  Everything works perfectly now.

  Thanks for your help.

• Was able to download and install the Prime Minister, but cannot install Photoshop Elements - get several error messages (software hacked, etc.).  Any ideas?

  Was able to download and install the Prime Minister, but cannot install Photoshop Elements - get several error messages (software hacked, etc.).  Any ideas?

  Download from adobe.com or prodesigntools.com site.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• AJAX get several tabular values II

  Hello
  Example "Multiple Get Ajax in the tabular values II" Denes Kubicek

   http://apex.oracle.com/pls/otn/f?p=31517:241:5798812617243::NO 

  does not include the buttons cancel, delete, send and add a line. But when the tabular form is created by APEX form has these buttons. The example is not intended for insert and update the data for this example. But I need to extend this powerful example to insert rows by clicking Add a line Update lines when you click Submit. Before I even try to implement a process to update I need to inform me if possible values (null) displays when you click on add a line in my example apex.oracle.com and Insert. Ajax get several II tabular values from the example has no data just static buttons, but within my application, I created standard buttons. Can someone help me remove these values (null) is displayed in the select and having also the standard text boxes appear when you click on the button Add a line?

  SELECT    '<img src="#IMAGE_PREFIX#list_gray.gif" '
         || 'onclick="popUp2(''f?p=&APP_ID.:3:&SESSION.::::'
         || 'P3_ROWNUM:'
         || '#ROWNUM#'
         || ''', 700, 700);" '
         || 'style="cursor:pointer;">' book,
         apex_item.text (32,
                         NULL,
                         80,
                         100,
                         'style="width:290px" ',
                         'f32_' || '#ROWNUM#'
                        ) subjects,
         apex_item.text (33,
                         NULL,
                         80,
                         100,
                         'style="width:50px;text-align:right" ',
                         'f33_' || '#ROWNUM#'
                        ) prices,
         apex_item.text (34,
                         NULL,
                         80,
                         100,
                         'style="width:130px" ',
                         'f34_' || '#ROWNUM#'
                        ) authors,
         apex_item.text (35,
                         NULL,
                         80,
                         100,
                         'style="width:20px;text-align:right" ',
                         'f35_' || '#ROWNUM#'
                        ) qtys
    FROM my_book_store

  My test on apex.oracle.com application has buttons that display (null) for each apex_item.text, when you click Add a line. Any information on this matter is greatly appreciated. In addition, data is stored in the my_book_store table, but it does not display as a table, is there a way to display data in a table based on the select statement? I think that's the reason for which the data is displayed only when selected.
  
  Published by: Charles on November 26, 2012 09:10

  woopsies! Normally, I add a block above html of the page of connection with them, but who has forgotten. It is apex_demo/demo

• Several filled images browser?

  I am confused.  Can Muse create a site like this?  http://grindspaces.com/

  I am trying to create something similar with a bkg image. on each section embedded in a site unique page as above.  How do they get multiple, separate images to fill browser like that?  So far I've played with the Muse to attempt such an effect, but nothing helped.

  Thank you!

  Hello

  What you are referring is called sensitive development which is not supported in Muse right now. For more information, see this,

  Can you change the layout of your site based on the size of the screen browser/device? (delicate design)

  - http://forums.adobe.com/thread/985129

  Kind regards

  Abhishek Maurya

• background image help

  Hi all, need a bit of help with an image of background, tried everything one can think (which is not much, it's the first time I tried doinga Web page) but I can't get my background image to display, I'll put the code I use below.

  HTML

  < body >

  < div id = "container" >

  < div id = "banner" > < img src = "Images/features" width = "800" height = "121" alt = "Photography oneshotmas" / > < / div > "

  < div id = "image" > < / div >

  < div id = "left column" > happy for "left column" id goes here < / div >

  < div id = 'center column' > happy for "middle column" id goes here < / div >

  < div id = "right column" > Content for id "right column" goes here < / div >

  < / div >

  < / body >

  < / html >

  CSS

  #container {}

  Width: 968px;

  Background: #FFF;

  margin: 0 auto;

  padding-left: 10px;

  padding-right: 10px;

  overflow: hidden;

  }

  #main image {}

  background-image: url (.. / Images/background.jpg);

  background-repeat: no-repeat;

  position: relative;

  height: auto;

  Width: auto;

  DRM for any help

  Nick

  NJP87 wrote:

  Nothing

  OK OK set a height on the

  . The

  needs a height so that it can display the image.

  {#mainimage}

  background-image: url (.. / Images/background.jpg);

  background-repeat: no-repeat;

  height: 100px;

  }