Get specified error file not found message

Similar Questions

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When you use the copy and collect the files to the new location, I get the error file not found...

  I have 24 hours to media manage and send a feature-length documentary online instead. Everything is ready to go and so I'm going in the media project manager manage all this and I get the following error message:

  

  This is meaningless - why he's looking for the file that it is the copy in the destination folder? The file in question is not in offline mode, it is bound to correctly in the project file and reads without problems. I also tried manually copying the file in the destination folder to see if it changes anything, but no luck.

  I would like ideas, that anyone could have!

  Thank you!

  -Michael

  It seems that because the name of the file was a '-' in there. I changed the name of the file and then reconnected and it has been working fine since.

• I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a "file not found messages

  I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.»  How can I go back in my files?

  There are a number of options available when you choose to import files to your catalog in Lightroom (library)

  1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.

  2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)

  3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.

  The original image file will be located at the location of your choice.

  There are no image files in your catalog (or library) file the original files are in the location you choose.

  If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.

• The dreaded error "file not found vmdx.

  I did the supreme error of trying to work on my computer when I am ill and not thinking clearly.  No need to chastize me - I am already beaten pretty badly.  Here's what I did:

  I have a Virtual Machine for Windows XP Pro SP3 (32 bit).  The HARD drive has been set to only 40 GB.  I need to increase it (and have the space), so I turned off the virtual machine and tried to change the size of the HARD drive.  I was invited I can't make changes on the computer virtual HARD disk if there are no snapshots then (cringe) I removed all the.   VMWare has done its thing and removed all snapshots (takes TOO long).  I changed HARD drive of 40 to 80 GB virtual computer and clicked on apply.  I started the virtual machine and the HARD drive was still at 40 GB. I tried to turn off the virtual machine and the closure of VMWare, but when I restarted the VM showed a 40 GB HARD drive (even if the parameters he showed to 80).

  So I thought that maybe I need to turn off the Mac in case there is some kind of conflict of HARD drive.  So I turned off the iMac completely, let rest, then restarted everything.  When I walked into the virtual machine and tried to open a window of the Explorer, the virtual machine could not read the HARD drive (there was this animated icon 'search').  I could read the files in different folders, but Explorer couldn't read the HARD drive.

  So I powered down and pulled up the parameters VM & gt; Hard drives and I saw that the "Split into 2 GB files" has been verified "."  I did a superficial check in the help files (with my brain foggy-sick) and thought that it was not the right setting, so I disabled it and clicked 'apply '.  "VMWare has started doing his thing (took a very long time) and ends with an error"file not found"

  Now, when I try to start the virtual machine, I get the dreaded message: "file not found: Windows XP Professional.vmdk.»  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location.

  I checked the spotlight.  I checked the Time Machine.  There is no file of this type.  Y at - it a hope?

  In the worst case (assuming that no hope), is it possible for the data files of the wreck of the virtual machine?

  iMac OSX 10.5.8 running

  Core 2 Duo 2.8 GHz

  4 GB of Ram

  HARD DRIVE 300 GB

  Need to see a file that lists the target Virtual Machine package, and you can use the instructions below to get it in the preferred form.

  1. in a Terminal (/ Applications/Utilities/Terminal), type the following without the quotes, including the trailing space, however do not press ENTER again and note that the following contains lowercase L, not those: 'ls - lAF.

  2. in the Virtual Machine in Fusion library (VMware Fusion (menu bar) > window > library Virtual Machine), ctrl + click on the virtual computer target, then select 'show in Finder '.

  3. drag and drop the computer virtual target on the Terminal and this will fill the full qualified path of the virtual machine.

  4 type the following without quotes, including the leading space, then press ENTER: "' > ~ / Desktop/filelist.txt '"

  Example of command line full in a Terminal:

  ls -lAF /Users/${USER}/Documents/Virtual Machines.localized/Windows XP.vmwarevm  > ~/Desktop/filelist.txt
  

  5. then attach the filelist.txt file that was created on the desktop to a response message.

  ==========

  Also the vmware.log file, (usually 4 of them), from within the virtual computer target package and if you need help to throw an eye to gather Information for VMware Fusion

• Error file not found in Temp. Firefox does not start

  When I try to start Firefox (Windows 8.1 desktop computer) I get a full white screen with only the following error message:

  File not found
  Firefox can't find the file at / c; /Users/ username/AppData/Local/Temp/name of file (more than fifty characters long, all the numbers and letters without anything that looks like a real word and ends in /BGAW05 .htm).

  It of only a button to Try Again that never works and some directions to verify the name of the error file, or check if the file has been moved, renamed or deleted. I check to see if the file is no where on C: and it doesn't. It is there no file in Temp even remotely close to that name. I run Firefox with several tabs that are registered and come back when I restart Firefox. So maybe this file in Temp was associated with a deleted tab.

  As I said, this error message comes up full screen, covering the taskbar and not reduce it, restore, close buttons, as if I was running in mode Metro, I never do and will never do.

  Because of this error I can not even start Firefox now, so I had to become a user of Internet Explorer.

  How can I get Firefox to stop looking for this file?

  Any help on this will be greatly appreciated. Thank you.

  I found a solution to my problem. Looking in my info on solving computer problems, I noticed that some problems can be resolved by the administrator. I tried with Firefox and it worked. The only damage was that I lost the current tabs. But Firefox seems to work fine otherwise.

• "File not found" message while trying to download games.

  Original title: downloaded games on this computer

  Whenever I have to download a new game, I get the message "file not found". Games Download fine on my other computer, but I would like to be able to use this computer also because of the convenience of not having moved.

  Hi buzzyh51,
   
  a. what operating system is installed on your computer?
   
  b. are you referring to the Games downloaded from a specific Web site?
   
  c. other computer also has the same operating system?
   
  d. get you any specific error and the error code?
   
  e. is the relevant issue in a particular game?
  f. What is the size of the file when it is downloaded?
   
  In the meantime, follow the steps below.
   
  Method 1:
   
  Temporarily disable any security software and then try to install the game, follow the steps mentioned below

  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

   

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  Turn off the User Account Control (UAC) and then try to install the games.

  Access this link to turn off UAC: http://windows.microsoft.com/en-US/windows7/Turn-User-Account-Control-on-or-off

   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Method 3:
   
  Put your machine in a clean boot State and try to install the game and check what is happening.
   
  Response with status.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Don't rip CD - error "file not found".

  I'm trying to rip CDs.  The player will open and read the CD but when I try to copy the CD, I get this error message "file not found".  When I try to change the location where the ripped files should go, there is no location listed and I can't change it.  It is as if he is not anywhere, for music to go.  Help!  I am a music teacher and need!  It's used to work very well!

  In the WMP library, you click on organize and select manage libraries - music. What places are? If there is no available location, remove them and also make sure that the default saving location is set. Do the same for the other libraries (videos, pictures, and Recorded TV).

  If this does not help, close WMP, open Windows Explorer, right-click the music library, select properties and click on restore by default. After that, make sure that a backup location is defined (as indicated by a check mark).

• the driver installation error file not found

  I have a mp3 player that works very well on my wifes XP system but when I try and use it with Vista I get error installation driver... file not found. I tried all 3 usb ports... no luck.  I uninstalled the device... nothing.  Then I tried to plug in a USB stick... of the United Nations recognizes the device. I tried on everthing that I found online.  I would like to reinstall Vista but I have it on CD, I don't have the product code.

  Rick

  Are you sure you have the correct drivers for Vista and that the device is compatible with Vista?  Just because it works on XP there's no guarantee that it will work on Vista (especially if you use XP drivers).  What is the manufacturer, the brand and the model of mp3 player?  What version of Vista are you using?

  Please answer these questions in your answer.  Also check with the manufacturer for drivers updated firmware and/or software compatible with your device and your version of Vista and try to install them and see if that makes a difference.

  Thank you.  I look forward to your answer with responses and progress that you make with the drivers.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error file not found in CS 5.5

  When I open PP CS 5.5, it provides a list of possible projects, I can open. Click on a project and the opening as a result. However, in the last 2 days, it became problematic. I can click on the draft list, but I now have an error message: file not found error. PP does not open upward. I did not move all the files, folders or projects autour. I simply closed the project, leave PP and then open it again when you want to change. I tried to open the auto saved the project file and I get the same message?

  What happens if you try to open the project by double-clicking it to start to Premiere Pro, Premiere Pro not opening first by clicking on the entry in the home screen?

  What happens if you open Premiere Pro, create a new project and then go to file > open project?

  I want to come is that it seems that Premiere Pro is not find the project in the home screen, which is very different from Premiere Pro is not able to open the project file.

• skin loading error: file not found

  Impossible to stream/watch videos from PBS.org using Mozilla Firefox. No problem in contrast with Internet Explorer. Error message: "error loading skin: file not found."

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Error 7 Build Error - file not found

  I am trying to build my software on another computer on the network. I am able to access the directory that I install and the program is not showing generation errors (all VI are not broken). This error only occurs when building. Any suggestion would be great.

  Thank you

  Nate

  The Build failed

  Possible reasons:

  A VI included or one of its dependencies does not exist. Open all the called start/exported/dynamically screws, recompile them (Ctrl + Shift + click the run arrow) and keep them to update their dependencies.

  \\PAINESTORAGE\Engineering\Test & Software\AutoTest Software\Current Version\AutoTest of manufacturing...

  Extended details:

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  Error 7 is is produced at ABAPI Dist report read link Info Error.vi-> ABAPI Dist Cmp parameters of disk Hier.vi-> ABAPI get File2.vi settings-> EBEP_Invoke_Build_Engine.vi-> EBUIP_Build_Invoke.vi-> EBUIP_Build_Rule_Editor.vi-> EBUIP_Item_OnDoProperties.vi-> EBUIP_Item_OnDoProperties.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer.

  =========================

  NOR-488: There is no Board of Directors.

  Problem has been solved-need to re - compile all VI and to link some missing files.

• Try to install the downloaded drivers when comes up with the error "file not found".

  Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found

  C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?

  Hi daddums1958,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

• Cannot download PS6-error "file not found". PS CC downloads very well.

  get the "file not found" error when you try download PS 6 on the CC website.  PS Downloaded using thin CC app but CC

  PS 6 is not available when you use app.

  Hi cbcart,

  Please try to download Photoshop CS6 from the indicated link: http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html.

  Kind regards

  Romit Sinha

• error file not found 2 "related" Superfetch

  Original title: my computer an error 2 my superfetch file is not found.  How can I retrieve this file?

  My computer has become slow over time, and in the interview, I am told that my SuperFetch is not on.  I went through the activation of my SuperFetch procedures and setting the parameters for the SuperFetch and Prefetch but still can not activate it.  Making a diagnosis gives me a 2, "file not found" error, so can not be activated SuperFetch. What can I do to fix this?

  SSD - Solid State Drive is a hard drive to store data. An SSD has no moving parts, which gives it advantages such as access to stored information faster, produced without noise, often more reliable and consume much less energy than the traditional hard drive found in computers.

  I suggest that you want to run the scan System File Checker to find if there is any corruption of file system on the computer.

  -Type command prompt in the start search box and then right-click on it and select run as administrator.

  -Type SFC/SCANNOW, and then press on enter.

  -Wait until the analysis ends. Check if you find errors.

  The log files will be saved in C:\Windows\Logs\CBS\CBS.log. Copy and paste the file to the desktop and check if there are errors. If there is, then provide us with the details of the error.

  For more information, refer to http://support.microsoft.com/kb/929833/en-us

  Let us know the results.