Get string of data Variables

Similar Questions

• Get the latest data of Variable shared before disconnecting from the network

  Hello.

  I use Shared - published network variables for my communication between two PC's. Each LV software will pass the data to another.

  Sometimes the wireless connection to become really bad and the network connection stops.

  I want to get the latest data. Currently my VI will show the value '0' on the variable shared data once the connection is cut.

  I tried using shift, but she registers the same results.

  Can someone show me how I can stay past data when the network connection is disconnected.

  Thank you very much.

  Kind regards

  Hello Fan, Ravens

  It works! Thank you very much.

  Kind regards

• How to convert a string of data to a table 1 d

  Dear all,

  I wonder if someone can help me.

  In the attached Elf, I have my program (in labview 8.6) who read the updates and the data of temperature for the time.

  I want to use temperature update in a calculation.  How can I get the new temperature I think it's in a format string and convert it into table 1 d?

  I tried, but the number I got the temperature wasn't the same temperature, which is shonw in the section of the program data.

  Could someone help me please?

  Kind regards

  You do not read the temperature, you read a binary file. You seem to be assuming that the string format, but do you really know? Nobody here can say since you do not have the file, if it is you need to use one of the functions of conversion of the string. And please, get rid of the local data variable. You're already usin shift registers. Do the same with the data from the file.

• Steps of the DCI Get Enterprise Server Data

  After reading the online help regarding

  CIM get data of Enterprise Server and

  Define the procedure of data of Enterprise Server, I always

  do not understand how these two steps

  and how to use them. Can someone help

  explain what is the Enterprise Server domain

  and how to use these 2 steps? A few examples will be

  also be useful. Thank you!

  Hello

  Let me explain with an example.

  Assume that the call center is for the banking sector with the flow IVR as shown below

  ---> Start

  ---> Play invites (welcome to XYZ Bank)

  ---> Menu (press 1 for banks and 2 for credit card)

  ---> Output1

  ---> Get string of digits (enter the account number)

  ---> Other steps

  ---> Output2

  ---> Get string of digits (enter the number of credit)

  ---> Other steps

  ....

  IVR collects the account number or the caller's credit card number and provides information associated with the appellant. If the caller needs more information, they connect to the available agent. In order to provide detailed information to the appellant, the agent requires a/c or CC number. Since this information is already collected by the IVR, the same can be sent to the Agent and the data can be filled in the screen of enterprise data.

  To move these data values to the company data screen, use "Set Enterprise Data" step in the script. Correlatively, the configuration of business data must be done in the office administrator.

  Flow of use "Set Enterprise Data" is given below

  ---> Select resource (Set Connect property as 'No')

  ---> Selected

  ---> Set Enterprise Data

  ---> Connect

  ---> Queue

  The guide of the desktop administrator to configure business data fields

  http://www.cisco.com/univercd/cc/td/doc/product/voice/sw_ap_to/apps_3_5/english/admn_app/cadad455.pdf - Pg.No: 2-3

  See also Tech Tip for ' how to set up a company data screen Pop?

  http://www.Cisco.com/en/us/partner/products/SW/custcosw/ps1846/products_qanda_item09186a00801df049.shtml

  Get the data of the company:

  Step to get Enterprise Server data allows to retrieve a field Enterprise Server and store it in a script variable.

  When a call is routed to an agent of the CIM with customized business data, the same will be skipped on the company information window. Agents can change the value of these fields in custom business data and transfer to the script of the aef. The script can retrieve these values using 'Get Enterprise Data"step.

  It will be useful.

  Concerning

  Yogi

• How get/treat XMLSocket data?

  Hi all

  I use Adobe CS6 professional and Actionscript 3.0.

  First, I have a c# program that basically just rss out data from a server in the form of XML data. I then a Flash program that is to receive the data, and then I do stuff with it. We had this work in Actionscript 1.0, but we need to upgrade the Actionscript 3.0 code, but instead of just try to convert stuff over to the new version of Actionscript, I'm going to re - write the program.

  So far I've basically just set some EventListeners over who I found examples of online for the use of XMLSockets. Now the Flash program will connect an XMLSocket server that feeds the data to the server the data feed returns new data every 5-10 seconds or more.

  Thus, when a group of XML data arrives to the port, I've defined, the following function is executed to handle the incoming data. Of my EventListener function for "socket.addEventListener (DataEvent.DATA, dataHandler);" ("socket" is defined as-> var socket = new XMLSocket(); ). So when comes the new data, it runs the function above. 

  The sentence I feel is to declare a new variable of type "XML" and then using this variable to get out of ' knots/children ' from the incoming XML data. I found an online example was very close to what I want to do, except instead of using an XMLSocket to get constantly streaming data in use the "'URLLoader ' function to get the data XML." I know I get the XML data on the server, because if I put (e: DataEvent) variable defined in the 'head' in a string function and before you run a trace on that I can see ALL the XML data in the 'Output Window'.

  But I can't seem to be able to assign a variable XML (e: DataEvent) so I can access data XML, the individual elements. The example that I found (which uses the URLLoader instead) uses this line (myXML = XML (e.target.data);) new to set the Variable XML, which does not work for me, and if I try to do the same thing in my code it simply prints for as many lines there are XML data-> '[XMLSocket object]'

  MY CODE:

  * I left the other functions that are in my code for the EventListeners you will see defined below, with the exception of the one in question:

  -> "function dataHandler(e:_DataEvent):void".

  import flash.events.IOErrorEvent;

  to import flash.events.ProgressEvent;

  import flash.events.SecurityErrorEvent;

  import flash.events.DataEvent;

  Socket var = new XMLSocket();

  socket.addEventListener (Event.CONNECT, connectHandler);

  socket.addEventListener (Event.CLOSE, closeHandler);

  socket.addEventListener (DataEvent.DATA, dataHandler);

  socket.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  socket.addEventListener (ProgressEvent.PROGRESS, progressHandler);

  socket.addEventListener (SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);

  success of the var = socket.connect ('server.domain.name.local', 3004);

  /*
  

  The code for this function was used in an example online as described above in the post, I found:
  

            LINK --> http://www.republicofcode.com/Tutorials/Flash/as3xml/
  

  */

  The code comment (* blue) will display ALL the XML inside the window "output":

  function dataHandler(e:_DataEvent):void {}

  var myStr:String = e.data;

  var xml;

  XML = new XML (e.target.data);  / / <-CE n "T WORK (I DON'T think THAT 'target' IS CORRECT HERE)? "

  if (socket.connected)

  {

  trace (myStr)

  trace (XML);

  }

  }

  The line output of the "trace (xml)" will show these data below in the "output" window (* FYI there should be 6 rows of XML data on each 'update'):

  [XMLSocket object]

  [XMLSocket object]

  [XMLSocket object]

  [XMLSocket object]

  [XMLSocket object]

  [XMLSocket object]

  Could someone show or point me in the right direction on this. I want to be able to access specific parts of the incoming XML data.

  Some examples of XML data:
  

  < VAR MESSAGE = "screen2Display" TEXT = "CSQ_1" / >

  < VAR MESSAGE = "F1_agentsReady" TEXT = "111" / >

  < VAR MESSAGE = "F1_unavailableAgents" TEXT = "222" / >

  < VAR MESSAGE = "F1_talkingAgents" TEXT = "333" / >

  < VAR MESSAGE = "F1_callsHandled" TEXT = "444" / >

  < VAR MESSAGE = "F1_ABDRate" TEXT = "555" / >

  Any ideas or suggestions would be greatly appreciated... !

  FOR INFO:

  I am VERY new to Actionscript/Flash development (* about a week now), so go easy on me haha...
  

  Thanks in advance,

  Matt

  In view of the DataEvent documents

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/events/DataEvent. HTML

  Looks like you need to read the property of the event data:

  var XML is new XML (e.data) - not e. .data target

• AppleScript set the string to date and add 30 minutes

  I am filling 2 boxes of time on a website in Safari, using Applescript from buttons selected by the user.

  My current Applescript is:

  Value dialog box to display the dialog box buttons ' when did your first departure case? {"07:30, ' 08:00, ' 08:30" "" "}

  definition of the first button returned of the result

  inputByName ("time 1", 0, start)

  the value of test for '07:30 ' - assuming that the user has selected '07:30 ' in the dialog box

  Test date - do not know how to assign 07:30 as an hour

  Finishing to test set + (30 * minutes)

  inputByName ("2", 0, finishing)

  The error return is number 'Invalid date and time date 07:30 < < script > >.' -30720

  Any help would be greatly appreciated!

  Thank you

  s

  You must use a complete date in the date/time of your machine settings.  A simple way is to simply get the current date (which returns a full date object) and manipulate that, for example:

  tell (current date)
    set its time to (7 * hours) + (30 * minutes)
    set someDate to it
  end tell
  return time string of someDate
  

• Get DateField selected date?

  I have my DateField has been fixed as follows:

  SimpleDateFormat dmy = new SimpleDateFormat("yyyy MM dd");
      DateField depart = new DateField(str_depart, System.currentTimeMillis(), dmy);
  

  It is shown:

  2011 05 04
  

  I want to get the selected date of this area and I use getDate(); method that returns type of Long (1304485459386).

  How can I do to convert it to a string and 2011-05-04 show?

  Thank you

  Kind regards.

  Thank you very much!!  girishthakr

• problem to get the current date in qml

  Hello world

  I'm trying to get the current date in c ++ and qml and I used the class QDate, but it still has some problems:

  Code:

  =====================================================

  QDate * nowdate = new QDate;
  QDeclarativePropertyMap * nowdateMap = new QDeclarativePropertyMap;
  nowdateMap-> insert ("date", QVariant (nowdate-> currentDate()));
  QML-> setContextProperty ("nowdateMap", nowdateMap);

  ===========================================================

  After setting the nowdateMap, I'm able to get the date in the application, but the format is really weird, I did not use QDatetime, but the restult of shows like ' 2013-1 - 3 T 00: 00:00 ", how can I get rid of the final"T00:00:00 "? or is there a better way to get the current date?

  Thank you

  QDate nowdate is QDate::currentDate();.

  QString nowdatestring = nowdate.toString (); / / to get the date string format, you can define the shape of toString(), you can //search it
  QDeclarativePropertyMap * nowdateMap = new QDeclarativePropertyMap;
  nowdateMap-> insert ("date", QVariant (QString (nowdatestring)));
  QML-> setContextProperty ("nowdateMap", nowdateMap);

  then in the file qml, using nowdateMap.date will do.

• Date conversion madness! String to date and vice versa

  Hello, I am working on an application targeting the OS version 4.5.x. I read a lot of messages and the links on this topic and can't seem to make the correct code.

  OK, here's the problem. I ask a timestamp date string to a server. The timestamp is the local time on the server (IS / PST etc.) and not GMT.

  My application must take time and subtract a number of days ranging from 1 day to 1 month. to get a "start" date The application must then provide the start and end date in a string format that it understands. Seems simple isn't?

  Here's the catch, however the time stamps should NOT be changed by the local what is using the device. For example, a device in Italy can contact the server located in Ottawa and ask a timestamp, the calculations shouldn't care about DST or time zone. Just take the supplied date and subtract a fixed number of days from her. Nothing more or less. This proved incredibly hard to do. first the HttpDateParser.parse (ServerTimeStamp) will be the subject of Date GMT and my problem is back to the zone specified in ServerTimeStamp.

  Thanks for any help in advance.

  My method

  public String getDAFIXMLRange (String ServerTimeStamp) {}
  String szRange;
  First analyze the incoming date and record them at the time of the last election.
  Day DAFIEndDate = new Date (HttpDateParser.parse (ServerTimeStamp));
  m_lLastPollTime = DAFIEndDate.getTime ();
          
  define the offset. Pre-programmed for simplification.
  lOffsetNumberOfSeconds long = 2 * 24 * 60 * 60;
          
        
  Calculate the start date by subtracting the offset. Multiply by 1000 to convert to milliseconds!
  Date DAFIStartDate = new Date (DAFIEndDate.getTime () - (lOffsetNumberOfSeconds * 1000));

  !!!!!!!!!!!!! HOW the DATEFORMAT OBJECT is used to get the output format ' yyyy-MM-dd' you HH: mm: "without the marker of time zone. The server knows that it is local to it. !!!!!!!!!!

  Now format the objects date as a string that includes the XML server.
  DateFormat DafiDateFormat = DateFormat.getInstance (); ' YYYY-MM-dd' you HH.

  !!!!!!!!!!!!!! THIS IS THE PART I'M CONFUSED on, with the HELP of zone to create the good date. !!!
  Time zone tz = TimeZone.getTimeZone ("IS");
  int adjEST = tz.getRawOffset ();

  Convert 'em in string format.
  String szDAFIStart = DafiDateFormat.format (DAFIStartDate);
  String szDAFIEnd = DafiDateFormat.format (DAFIEndDate);

  Replace the date calculated in the end segment ranges date XML.
  szRange = statItems.replaceAll (XML_DATERANGE, "TAGSTARTTIME", szDAFIStart);
  szRange = statItems.replaceAll (szRange, "TAGENDTIME", szDAFIEnd);
  Return szRange;
  }

  Hello

  Yes would be better if the server could provide you date to the GMT time zone, or date as a long.

  But if you can't ask the case on the server, one way might be to manually parse your string and create a new date of parameter values in a calendar, something like this

  Calendar cal = Calendar.GetInstance ();

  Cal.Set (Calendar.DAY_OF_MONTH, date)

  Cal.Set (Calendar.MONTH, month-1)

  Cal.Set (Calendar.YEAR, year);

  ' set the new time with the values, you must cal.setTime (cal.getTime ()-,...);

  and then put the date with SimpleDateFormat.

  I think that this could be a solution if you know the format string you recived that date and it won't change.

  I'm not sure but maybe it could be a solution.

  Kind regards

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• Problem with convert the string to date using DateTimeStringConverter

  Hello

  I would like convert string date (JJ/MM/AAAA) - it is useful to compare dates in TableColumns.

  so I use DateTimeStringConverter (the string "01/11/2014" is a value of date picker)

  DateTimeStringConverter format = new DateTimeStringConverter (Locale.FRANCE,

  "dd/MM/YYYY");

  Date d1 = format.fromString("01/11/2014");

  D1. ToString()

  "I do not get the right date, but that date =" Mon Dec 30 00:00:00 THIS 2013!

  I don't understand what the problem is (which in fact should not be a problem)?

  Any ideas?

  Thanks in advance

  Fabrice

  You have an error in the spec use format ' dd/MM/YYYY' instead of 'dd/MM/YYYY '.

  DateTimeStringConverter f = new DateTimeStringConverter(Locale.FRANCE, "dd/MM/yyyy");
  Date d1 = f.fromString("01/11/2014");
  System.out.println(d1.toString()); // --> Sat Nov 01 00:00:00 CET 2014
  

  If you do not need long, I would use DateStringConverter

• To get yesterday's date

  Hello
  
  Can someone help me here please...
  
  I get the current date in a variable using the code below.
  
  Define CurrentDateTime = % DATE courante%
  
  Now I need to get yesterday's date in YDate, how do I get this?
  One way is to break the date and by reducing to 1, but then I need to manage months and years which is a heavy.
  
  Thanks in advance

  I need using the DOS command

  Date arithmetic to back script.

• Get the current date?

  Hello

  I put a DATE field in my_form, fine, but I need for the pre-populate/default including the current date, for example, if the user has today opened the form, this field should come with date of todays(11/7/2011).

  I got the code snippets in the fine of links, below

  http://StackOverflow.com/questions/1531093/how-to-get-current-date-in-JavaScript

  http://www.Tizag.com/javascriptT/javascriptdate.php

  http://JavaScript.Internet.com/time-date/current-date.html

  code snippet is as below,

  var today = new Date();

  var dd = today.getDate ();

  var mm = today.getMonth () + 1; January is

  0!

  AAAA var = today.getFullYear ();

  if(DD<10) {dd = '0' + JJ}

  if(mm<10) {mm = '0' + mm}

  var = today mm + ' / ' + jj + ' / ' + yyyy; document. Write (Today);

  It is quite complex, but it will give you today's date in the format mm/dd/yyyy.

  Just change today = mm + ' / ' + jj + ' / ' + yyyy;

  document. Write (Today); format what ever you like.

  But my requirement is.

  As my_form is global, so the date should come according to the date format of the user, eg. for the United States the DD/MM/YYYY where with regard to Asia and Europe sound DD-MM-YYYY

  (1) thus, pls let me know is there ready to use function / integrated to achieve my requirement

  (2) and thinking about writing the code in the field initialization event, is this correct? I need to change the event to put my code?

  Thank you

  Here's the modified Code.

  If (loggedUser eq 'USA') then

  $ = Num2Date (Date (), "MM/DD/YYYY"); Returns the date in the format DD/MM/YYYY

  endif

  If (loggedUser eq 'Europe') then

  $ = Num2Date (Date (), "DD/MM/YYYY"); Returns the date in the format DD/MM/YYYY

  endif

  Function Num2Date syntax:

  Syntax

  Num2Date (n [[, k]])

  Parameters

  Parameter	Description
  n	An integer representing the number of days. If n is invalid, the function returns an error.
  f (in option)	String a date format. If you do not include a value for f, the function uses the default MMM D, YYYY date format.
  k (in option)	A string of locale identifier that conforms to the locale naming standards. If you don't not include a value for k, or if k is invalid, the function uses the ambient locale.

  Thank you

  Srini

  Post edited by: Srini Dhulipalla

• Formatting string to date in BPEL

  Y at - it a way to format a string to date in BPEL value.
  
  I would date a string and I need to push this date value in Oracle data to a field that is of data type Date. I don't see no function in BPEL, which is allowing me to do.
  
  For example my entry of BPEL is ' 01/01/2010' and I need to convert this string in the variable of type date and assign one of the fields in one of the tables in the Oracle database.
  
  I use xp20:format - dateTime function, but it is also to give me the time that I am not able to introduce into the database of the field is specified as the date.
  
  I'm doing this conversion in the allocation and transformation process.
  
  Thank you
  Arun-
  
  Published by: user626948 on August 28, 2008 22:40

  I guess you are trying to insert in the database through the database adapter. The DB adapter always represents a database as XML dateTime date. The default format to create a dateTime is YYYY-MM-DD' you hh. To create a dateTime valid object to be inserted into your database with the given substring you would end up with an expression such as:

  XP20:format-DateTime(Concat(Substring('01/01/2010',7,4),'-',SUBSTRING('01/01/2010',1,2),'-',SUBSTRING('01/01/2010',4,2),'T00:00:00'))

  assuming that 1 January 2010 is in MM/DD/YYYY format. In the expression builder you will probably replace the 1 January 2010 "with a reference to a variable that contains the date value.

  Kind regards
  André Jochems

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.