Portege 3440 ACPI BIOS under Windows XP errors

Similar Questions

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• update of the bios under windows 8.1

  I am trying to install a new graphics card (gtx750ti) than ATI Radeon HD 4600 Series (Microsoft Corporation - WDDM v1.1) and have updated to 750w power supply. Turn on the pc and no video, the pc is running but nothing on the monitor. Map vid tested on another machine it works fine, they suggested the bios update. I hesitate to update because there is no udate windows 8.1, any suggestions?

  Name of the Microsoft Windows OS 8.1 Pro with Media Center
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name ROBERT-PC
  System manufacturer HP-Pavilion
  A6652f model FK574AA-A2L system
  System Type x 64-based PC
  SKU FK574AA #A2L system
  Processor Intel (r) Core (TM) 2 Quad CPU Q8200-2.33 GHz, 2333 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 5.43, 2009-09-10
  SMBIOS 2.5 version
  Embedded Controller Version 255.255
  BIOS Legacy Mode
  Baseboard manufacturer PEGATRON CORPORATION
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.3.9600.17031".
  User name Robert-PC\ROBERT-PC\Robert
  Eastern Daylight Time zone
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  Available physical memory 1.95 GB
  Total virtual memory 8.00 GB
  5.72 GB available virtual memory
  Page file space 4.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM Monitor Mode Extensions not
  Hyper-V - second level address translation Extensions No.
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  update of the bios under windows 8.1

• AMD Radeon 7400 (switchable graphics) on dell vostro 3350 does not work under Windows 8 (error code 43)

  Hello

  I just installed Windows 8 and switchable graphics does not work on the system. The most annoying is that I can't use the radeon graphics card, because the stop system it works.

  I've attached a screenshot of what I see:

  

  What I have tried to solve the problem:

  • Install the latest drivers AMD radeon HD (http://support.amd.com/us/kbarticles/Pages/AMDCatalyst1211betadriver.aspx)
  • Reinstall the driver built-in Intel (HD Graphics 3000)
  • The latest version of the A09 bios for laptop
  Nothing has worked.
  Switchable graphics worked very well under Windows 7 64-bit.
  Help, please!

  and the version of the driver:

  

• Update of the BIOS under Windows 7 and XP

  Hello

  I have XP on C:\ and you want to install windows 7 on D:\ and my friend did the same thing without any problem.
  but my big question is after I installed win7 on D: and XP on C: when I try to install/update the BIOS for windows 7 then what happened to XP?

  thnx.

  Hello

  Sounds like you don t know this BIOS, it's exactly the BIOS has nothing to do with the software or the operating system that you are installing. EC * B * asic * I * nput * O * utput * S * system is stored on a ROM module on the motherboard and manage the different hardware components, system startup, etc..

  If the BIOS update is needed on a BONE. ;)

  Post edited by: Lars_3

• Problem of access of the bios under windows 8

  Hello

  Since the update my pc windows 7 to 8, I have had problems with the BIOS I can access is no longer the bios by pressing f2 on my keyboard, I've been on people to sort for weeks to try to get this problem but I have anywhere below are a list of things I've tried
  1. communicate with my Packard bell manufacturing gave no progress if the question has been reassigned to tell me it was a software problem with windows
  2. I contacted a local technician who did not know what the problem was
  3. I contacted Microsoft answering service who told me that I should try to access BIOS through advanced, startup was missing why it worked several important things like
  The UEFI firmware settings and use a device (firmware settings is very important because it allows the pc to boot directly from the bios)
  4. I contacted Proton an independent company with experienced technicians, who suggested the same thing as Microsoft
  Thanks for any help in advance.
  James
   

  As you do not access the BIOS from Windows at all, not sure how this is a Microsoft issue.  The BIOS is what starts after the POST or Power On Self Test.  Then the BIOS takes over and from there it resets the Windows MBR to start.

  Therefore, hit F2 before you see anything to do with Windows, while F2 is the key used to access the BIOS Setup.  As soon as you see something to do with Windows, it is far along the boot process and you must try again.

• Configurable TD & x2APIC Mode Bios under Windows Server R2 2012

  Question about the settings of the Bios for Configurable TD & x2APIC Mode on Windows Server R2 2012.

  CPU 2 each Intel® Xeon® Processor-E5-2680 v4

  What are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?

  Configurable TDP - Normal or - level 1

  X2apic-on or - off mode

  Its use is for BOINC CPU as PrimeGrid project

  Thank you

  Hello

  bcavnaugh

  What are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?

  None of these options will affect the States of frequency or the power of the CPU.

  bcavnaugh

  Configurable TDP - Normal or - level 1

  It is a power and a cool option. Nominal will set fans operate at normal speeds. Level 1 will decrease the speed of the fans.

  bcavnaugh

  X2apic-on or - off mode

  This enables or disables the new method of communication of the CPU. This should only be disabled if the operating system does not support. The processor will work more effectively by enabling this option. It can affect performance, but not in the States MHz or raw turbo.

  Thank you

• I can't update/install a file BIOS under Windows 7

  I'm trying to update my BIOS on my Windows 7 computer. I went to Dell and the file downloaded installation, but when I try to install it (even with administrative rights), I get a window that says: "the system is different between the current system and the ROM file. I performed a test of compatibility of file and found the BIOS file is supported only by Windows XP Service Pack 2, and my computer can not solve the problem of incompatibility. I made sure the BIOS file I download is actually a version of BIOS newer than what I currently have in my computer (A07 [2009] to A05 [2012]). I even tried turning off my software anti-virus and firewall temporarily, in which case it was somehow corrupt download - things strangest occurred - nothing helped. Any suggestions?

  Since there is apparently no way to post one response other than an answer on the site, I must say what I have to say by asking another question. I could not update my BIOS is because I chose the download BIOS for the computer model wrong. - the Dell Vostro 270 over 270 s. As it ends, I installed current BIOS. Sorry for the confusion.

  Dave.

• Portege M800 - update BIOS stucks - Windows 7 32 bit

  Hello world!

  I have a problem.
  I downloaded the update to the BIOS of Toshiba Hompage.

  The update started successfully, but the point of "BIOS News Flash ' to 'treatment block 26 of the 33"the stucks updated!
  I'm waiting for almost 2 hours, but nothing happens.
  My screen freezes, I can't move the cursor, the clock shows the time even... then nothing happens...

  Is this normal?
  I don't think, but it's my first update of the BIOS, so I'm not really familiar with it...

  Anyone have an idea?

  It would be great help!
  Thank you!

  Hello

  It's different not a common BIOS update process
  The update of the BIOS should not take much time.

  In your case it is possible that something was wrong during the flashing process and module ROM was not properly flashed.
  I think that you are in difficulty and in my opinion, only the ASP technician would be able to help you.

  The BIOS ROM must be flashed again using a crisis procedure and this can be done by a technician of the ASP.

  Welcome them

• Can Equium P200 (PSB5E) - I update the BIOS on Windows 7?

  Hello.

  My question is: how to upgrade the BIOS under Windows 7? My Bios version is 1.70, I've seen, this version 2.50 is available for download, but only under Vista.

  Can it run Windows 7?

  Hello

  First question;
  Why do you update the BIOS?
  Is the reason for this?
  If the laptop runs successfully a BIOS update is not necessary!

  Now back to the issue of BIOS;
  Some laptops have special need BIOS for Win XP or Vista.
  So if you are using XP or Vista, then you must use the BIOS that was designed for one of these windows systems on the European driver Toshiba page you can see a column of OS that provides the info for what BIOS OS is designed.

  But in most cases, the BIOS is OS independent, which means that you can use it in any Windows operating system.

  Simply said; If the BIOS is available for Vista, then you can only use it with Vista.
  If it s independent OS, you can use it with Win 7, Vista or XP

• Portege M700 - 116 BIOS update error

  HI, I have a Portege M700 - 116 with Vista Ultimate SP1. And I download a BIOS fresh (P005Bv160.exe) [http://ru.computers.toshiba-europe.com/] date of 1, 60 - WIN version 10/10/08. When I try to install it, I get an error window saying:

  Unsupported product type is installed.
  Package BIOS BIOS version: Ver.1.60
  Current BIOS version: Ver.1.50

  So my question is... WHO IS WRONG? What type of product? This update of the BIOS is OS independent and independent language (world-wide), so I think that a lot of people with M700 will have the same problem. There is some problems with the previous version of the BIOS? I downloaded compared to the same month of site there. I do not understand, Setup the BIOS for Windows was made to make the process easy, but it doesn't even...

  Hello

  I see you are using Vista Ultimate.
  I doubt that there is an original version of Vista pre-installed.

  Error message: type of product does not support is installed, said the product (OS software) that is installed is not supported by the BIOS. I think that the error is related to the ultimate Vista preinstalled. Perhaps the BIOS may not be updated under Vista Ultimate.

  It would BE very interesting to know if you can update the BIOS runs Toshiba preinstalled OS.
  Should check this out!

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Portege 3440 - cannot install Windows 2000

  Hello friends :)

  I have a problem with the installation of Windows 2000 on Portege 3440.
  I was running Windows 2000 with the FDD USBB (with driver for PCMCIA of CD-ROM) installation and CD-ROM PCMCIA. "Everything was ok at the moment when I came for winnt ' q.

  When installing without partition on the HARD drive was appeared on blue background information: "could not find a place for a swap file. With partition (FAT32, 6 GB): "Setup could not install the Windows boot loader. To ensure that your C: drive is formatted and that the drive is not damaged. I tried with three other HDDss.
  What should I do to install this system? (Same users do not have these releases)

  Thanks for help
  Adrian

  Hello

  1 don't forget to prepare your hard disk with fdisk (a bootable partition) and format it with the Fat32 file system

  2. start by a MSDos saved in your floppy drive-drive with drivers for your PCMCIA CDrom drive (Freecom)

  3. copy the entire i386 to the W2K installation CD directory your HD, be sure to have loaded smartdrive, otherwise it will take ages!

  4 start again with the saved, go to the i386 directory and start Windows NT

  You can look here for more information about freecom pilots and the bootdisks: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232
  On your 3440 it should be easier than with the R100 because of normal 2.5 "HD 6 GB, but the problem is basically the same

• Portege 3440 Windows Nt

  Hello!
  I have a Portege 3440 with Windows NT operating system and I am looking for a driver USB for Windows NT. Where can I find it?
  Thank you.

  Hello

  Sorry, but I have bad news for you. There is no USB for NT drivers. Please read this article written by Microsoft

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;196661

  Good bye

• Satellite Pro 4600 ACPI Bios error

  Hello

  I have a Satellite pro 4600. When I started today the machine displays a blue screen stating that the acpi bios is not fully compliant and does not start in windows. He suggests the update of the bios I did to version 2.6, but still no luck, wont let me in in either safe mode

  Any help is appreciated

  Thank you

  Hello

  Until you want to start the operating system please check the BIOS settings and set it to ACPI > Enabled. Don't forget that your BIOS supports ACPI option. If there is no success the only solution is to reinstall the operating system and don t change BIOS settings after installation.

  Before the start of the operating system the hardware will be verified by Windows. I hope that your update of the BIOS is to download site of Toshiba and designed for your device.

  Good bye