Get the converted HTML (dynamic converter) content of external application

Similar Questions

• Get the complete HTML file of url

  Hello world!

  I'm working on a small project recently where I should pick up the announcement of the today's weather on the web.

  So I use the HTML screws from the weather.com site.

  The idea is that I'd like to know, the trend of the day (sunny, cloudy,...), and I thought I could do it two informations: from the small icons or text they always show on the Web site.

  So I used the web Inspector of Firefox to find the information I need, and in Firefox, I find it very easily: it is written in the full text, either the icon is loaded into the html code, it is very easy to know what the weather from the HTML file will be.

  Therefore, I thought I could just using VI from Labview analysis to find the information I need the HTML file loaded from the url.

  But... I don't know why, Labview gives me the html is not completely identical to the Firefox gives me: some of the lines are missing, and of course, those that I need, because it would not be fun otherwise!

  Anyone has an idea why this would happen?

  I work with Labview 2014 for Mac.

  Thanks in advance!

  Hello world!!

  First of all, thanks a lot for your answers!

  I finally found the problem, thanks to a King of HTML I work with

  The problem is that when checking with the Inspector of Firefox, Javascript is taken into account, while is not in Labview. It is possible to get the HTML with Firefox by disabling javascript in everything: config. The watch inspector then same as Labview HTML gets, which allows you to easily find the part you are interested in.

  I hope that's clear!

  Thanks a lot again for your answers everyone!

  TA.

• How to get the number of Figure of content?

  I have a bunch of figure paintings. They look like this:

  

  The first cell has a paragraph applied with the following numbering style:

  

  My question is how the HELL you are supposed to get the content of the first cell as a string?

  //select table
  var cell = app.selection[0].cells[0];
  var str = cell.contents; //str should contain 'Figure 7'
  
  

  Is there a direct way to do so? I am at the wheel nuts trying to figure out.

  I remember one time did this before but it was super arranged.

  Thank you

  KUD

  Hello

  str = cell.paragraphs[0].bulletsAndNumberingResultText;
  

  Jarek

• get the Position of dynamically placed childs

  Hello adobe community

  Maybe someone has had the same problem before... I create children symbols on stage, give the child a x and y startposition and tell them to float left. It works very well.
  but now I would like to get the x and position there of each child object in order to move it to another position. is there a function to get the real coordinates x and y of a symbol on the stage?

  see you soon

  You should use css ('left') and ('top').

  example:

  var elementLeft = sym.$('Ellipse').css ('left');

  var elementTop = sym.$('Ellipse').css ('top');

  Alert ("the ellipse is at" + elementLeft + ' from left to right and ' + elementTop + ' at the top.) ») ;

  

  She returns the left and top position with regard to the example 234px and 20px. So it you have to use the number as just an integer, you will need to analyze.

  or you can use position():

  var positionT is sym. $('Ellipse') risk () .top;

  Var position = sym. $('Ellipse') risk () .top;

  Alert (positionT + "and" + position);

  

  This returns integers without the px so no need to analyze.

• How to get the path page dynamically

  Hello.
  
  How to get the path to the current page in the processRequest of the controller method? e.g. "/ oracle/apps/ak/sandbox sand/webui/SamplePG.
  
  -wheleph

  pageContext.getParameter ("page");

  This line will give you exactly what you want...
  Thank you
  Annapurneswar

• Get the error failing wmpnetwk.exe with WHS 2011 application

  I had problems with the windows media player network service on my windows home server machine. Continually, I get the following error:

  Name of the failing application: wmpnetwk.exe, version: 12.0.7601.17514

  The failed module name: ntdll.dll, version: 6.1.7601.18247

  Exception code: 0xc0000374

  Offset of vulnerabilities: 0x000000000000c4102

  ID of the process failed: 0x149c

  The failing application path: C:\Program Files\Windows Media Player\wmpnetwk.exe

  Path of the failing module: C:\Windows|system32\ntdll.dll

  (I think) as a result, I can't successfully access my home server to my Xbox 360, or new certified DLNA Samsung Blu - ray player.

  I tried running sfc/scannow and it finds no problems. I checked the service has started and is configured to start automatically on startup. I restarted the server.

  Help!

  Hello

  We have a dedicated support team that will help you solve the problems on the Windows Home Server platform. Check out the link to post the same query:

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  Please let us know if you need any other assistance on Windows.

• Windows XP in IE5 ~ runs slowly, freezes. Get the message: virtual memory is low. Some applications will not work.

  Windows XP in IE5 ~ runs slowly, freezes.

  Get the message: virtual memory is low.

  According to the report of diagnosis of Norton 360: need to upgrade RAM for best performance.

  Need to clean IE (32 MB) & temp of Windows (60 MB) files every day.

  The speed is 5.2 download,.6 upload. Turns fast in 'Safe Mode '.

  What do you do now?

  Thank you

  What Windows XP SP updates are installed.

  Internet Exp [lorer 5 is long it's sell by date!] Why have you not updated to a later not necessarily the latest version of Internet Explorer.

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Norton 360 is a bad choice of security for any computer software but especially so for an old computer. There is a lot more suitable alternatives to freeware.

• I recently started getting the following message when I start Windows Mail: the message store was damaged by an external application to Windows Mail

  I recently started getting the following message when I start Windows Mail:

  The message store has been damaged by an external application to Windows Mail. Windows Mail has been able to successfully recover from this corruption. (0 x 000000000) there are also twop messages in my Inbox "not found" and I can't delete them.

  However no identoify not the application Windows and McAfee does not detect any virus.

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• Get the message "unidentified device" what insertion of external hard drive LOK - IT

  Original title: LOK - IT SDG003FM FIPS Edition 16 GB USB Flash Drive

  I bought the LOK - IT new hard drive and followed the instructions to the letter.  I was never able to get the 'red' blink and never had a 'green light' to activate my PIN code.  The message kept appearing as 'unknown device' and the software was not found and device not usable.  I updated and installed all my improvements of Windows 7 (64-bit), redemarrees (twice), tried all the recommendations in the user guide of Microsoft and still can not do I would install a PIN or use the product.  'Blue light' continues to blink, but no attempt to install the product, as recommended by the user guide doesn't seem to work.  Can you give us some advice on how to overcome this problem?  Thank you!  Dave Austin

  Hello Dave,

  Have you tried using LOK - IT USB port on this computer?
  It is possible that the USB port is bad.

  LOK - IT works with all systems operating smoothly.  Once the PIN is entered using the PIN - pad on board, it looks like a standard USB computer.
  I am with the manufacturer and will reach out to you with the information that we have on file to discuss further.
  Thank you
  John

• How to remove or customize the white preloader with edge content in DPS applications.

  I'm looking for a possible solution with the White Page of Preloader when you create an API via Indesign.

  The content is created entirely in Adobe Edge animate, then its published HTML code is placed by the superposition of Folio of Indesign. Then via the DPS APP BUILDER converted into an IPA, this work is fantastic!

  .. but...

  When the application is launched on the iPad there are always, always the white screen of preload with the wheel of rotation for a few cases.

  Tried to customize the preloader in Edge screen but the white screen will display first, then the custum pre-load the screen, then the content.

  Also tried to directly edit the HTML code, but no luck, still has the white screen with the spinning wheel.

  Someone have an idea how to hide this white screen? Or how to customize it?

  Thanks for any suggestions.

  Instead of creating the image of the poster on the edge, try to use a poster in InDesign. The image of the poster on the top of the overlay from the edge and put the overlay with a delay, for example 0.5 seconds. The image of the poster must appear initially, while the superimposition of edge loading in the background, and then appears in front of the image of the poster.

• Impossible to download Service Pack 3, get the download message is not a valid win32 application

  I tried several different ways to download service pack 3. Download nesseary that say my computer of me that I need to improve several performance problem im having. I was completely failure. my last attempt at resualted in a new error message this time telling me that the download is not a win32 application invalid. in fact, my attempts at 2 last download said the same thing. It's new and very frustrating. Please help me solve problems what ever my computer. I tried for several weeks to fix. and I'm getting only more lost and confused. I need my computer to school and cannot afford for now a new or software help me please.
  Thank you
  Vivian IronWing

  Original title: download larger problems! Help!

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  The above article can help, and there is a link with the SP 3 on CD command, which is only $3.99 more delivery charges.

  Alternatively, you can call to order the CD.

  1-800-360-7561 United States

  1 Canada-800-933-4750

• I get the screen on my desk repeatedly:__msimn.exe - Application error

  I am an old retired former railwayman of 82 year with little computer knowledge and I need help. I constantly get a screen on my desktop as follows: the instruction at "0x10068c9" referenced memory at "0x01b380e0". The memory could not be "read". Click on OK to terminate the program.

  Can someone help me get this corrected?

  Hi norm3r,

  Do you remember any changes before the question?

  Follow the steps below and check if the problem persists.

  Step 1:

  Start your computer in safe mode and see if the message appears.
  
  Step 2:

  If the message does not appear in safe mode, I would put you your computer in a clean boot State. There could be a third-party program causing the message. Clean boot helps eliminate conflicts of third party software.

  Note: Don't forget to restart your computer as usual after you fix the problem.

  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to get the material status of ESXi host of external surveillance system?

  Hello!

  I've got hardware ESXi host information (for example, CPU, disk, etc.)

  that I want back outside a vCenter/ESXi for an external monitoring system.

  I really really slighty possible via Powershell saw...

  Thanks for your help!

  Hello

  the link that I commented, explian how to monitor the status of the ESXi hardware by using the cmdlets for powershell CIM 3.0.

  Not the virtual machines

  This, will you?

  Check this code from the link, you should notice that connects to an esxi host, not virtual machines:

  import-moduleCimCmdlets

  2	$ipaddress="10.20.177.15"

  3	$HostUsername="root"

  4	$CIOpt= New-CimSessionOption-SkipCACheck -SkipCNCheck -SkipRevocationCheck -EncodingUtf8-UseSsl

  5	$Session= New-CimSession-Authentication Basic -Credential $HostUsername -ComputerName $Ipaddress -port 443-SessionOption$CIOpt

  6	Get-CimInstance-CimSession$Session-ClassNameCIM_Fan

  Best regards

  Pablo

• Get the fatal exit Code 34 when installing an application

  Anyone running into that?  I download an app (PS 6, ID 6, etc.) through AAM and then tries to install it.  Towards the end of the installation, I get a fatal error with exit Code 34.  Msg log readings:

  FATAL: Payload ' {E2286898-049D-43EF-AA30-0A93E3744AC3} camera profiles Installer_7.1_AdobeCameraRawProfile7.0All 6.0.98.0 "information not found in Media_db.

  I tried to download and install a trial version of PS 6 and the same error occurred.  I tried to start the cleaning of the CS, but he says that there is no session CS installed on my iMac (last version of Lion).  I completely deleted beta and versions CS apps test before running the MAO.  I had the RC of Camera Raw 7.1 candidate charged simultaneously on my Mac, but it does not uninstall app for that (at least as I can tell). It seems that the RC 7.1 may be involved with this error but I can't identify how to get rid of him.

  Any ideers there?

  I had the same problem, and I use windows 7 also. After discussion with the support adobe technique. He showed me how to solve the problem.

  Also, I tried the clean tool already. That did not help.

  Navigate to C:\Program Files (x 86) \Common Files\Adobe if you use the 32-bit system, I think it would be C:\Program Files\Common Files\Adobe

  Name of the folder change 3.

  Adobe PCD-> Adobe PCDold

  backup-> backupold

  Caps-> capsold

  Then run the installer again.

  This method worked for me. Hope that might work for you too and save you time.

• Get the symbol attention E-mail County in email application

  
  

  OK, so here's the deal. I deleted the new account. I got the email app set up the account automatically as the first time I tried. This time, he chose the IMAP server. The first time, it's the pop server. The funny thing is, I didn't even know Mindspring had an IMAP server, but now I do. Good to know.

  The warning icon is now gone.

  Thanks for all the feedback.